Cleaning Throttle Bodies & Code P0507 issue

Keko1693 · 10-22-2016, 02:04 PM

So recently Iv'e cleaned my throttle bodies, did the "re-learn" procedure and my car idles at 600-700 which I'm assuming it's normal, but my CEL came on for the code P0507 "Idle Speed Control System RPM higher than expected" what could be the cause of this?

Trips · 10-22-2016, 02:11 PM

If it's idling like normal just reset the ecu and see if it goes away.

Keko1693 · 10-22-2016, 02:26 PM

Did a ECU Reset, light dosn't come on but is it necessary to drive certain miles to be sure? Cause before my light just comes on for my test pipes.

10-22-2016, 02:04 PM	#1 (permalink)
Keko1693 Base Member Join Date: Oct 2014 Location: ... Posts: 84 Drives: 14' Nissan 370z 7AT Rep Power: 11	Cleaning Throttle Bodies & Code P0507 issue So recently Iv'e cleaned my throttle bodies, did the "re-learn" procedure and my car idles at 600-700 which I'm assuming it's normal, but my CEL came on for the code P0507 "Idle Speed Control System RPM higher than expected" what could be the cause of this?

10-22-2016, 02:11 PM	#2 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	If it's idling like normal just reset the ecu and see if it goes away. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New throttle bodies	VSS370z	Intake/Exhaust	10	09-03-2016 09:53 PM
Cleaning throttle bodies	dthem370	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	88	02-12-2016 12:22 PM
Porting Throttle bodies?	RyanWest	Engine & Drivetrain	6	11-25-2013 01:41 PM
can the throttle bodies be taken off?	boomboom	Engine & Drivetrain	9	11-03-2013 02:46 PM
p0507 and sticking throttle?	7419sundat	Engine & Drivetrain	12	10-07-2012 09:44 AM

10-22-2016, 02:26 PM	#3 (permalink)
Keko1693 Base Member Join Date: Oct 2014 Location: ... Posts: 84 Drives: 14' Nissan 370z 7AT Rep Power: 11	Did a ECU Reset, light dosn't come on but is it necessary to drive certain miles to be sure? Cause before my light just comes on for my test pipes.