07-29-2016, 12:42 PM
|
#10 (permalink)
|
|
A True Z Fanatic
Join Date: Sep 2010
Location: Crooklyn
Posts: 1,011
Drives: 370Z 6psd-sport-pkg
Rep Power: 21
|
Quote:
Originally Posted by RadioFlyer
I noticed a pattern of one bank running different than another when I started tuning my car. I think it has something to do with the stock non-parallel fuel rails. Never really figured out the cause. But over a pull there are variations in the two banks' AFRs. Sometimes as much as a full point. In UpRev, there is a table where you can adjust fuel trims per cylinder. I went through and added 1% to all the cylinders on that bank, I think I added to cyl 1, 3, and 5, and then dialed in the correct AFR from there. If you're on ECUtek, I'm not sure what they have in terms of adjustment, but if UpRev has it, I'd imagine ECUtek would have something similar.
|
I believe this is because of bank one intake is connected to the engine emission, but not bank 2. Get a catch can and throw a Y connection to both banks and you will see your A/F ratio even. After you remove the adjust. I think thats why, but it also could be a leaking gasket somewhere.
__________________
Kids don't do Drugs, Drugs are bad, so let the professional druggies do Drugs for you.  537whp/496lb/tq@8-9PSI 93 octane
|
|
|
Similar Threads
2Likes
Threaded Mode
