Nissan 370Z Forum
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)
-   -   Crank Pulley Replacement (http://www.the370z.com/engine-drivetrain/113267-crank-pulley-replacement.html)

BlackZMamba 04-22-2016 04:24 PM
Quote:
Originally Posted by FLUJOKE (Post 3465563)
NST is still around and they're out of Houston. They're pulleys are very light and solid so far with me. If you're going boosted go with ATI like people said but otherwise you should be ok. I went NST over stillen bc they offer and OD Alternator pulley as well. I went w/ NST over ATI bc of costs and not boosted. I feel a huge amount of stress lifted off the engine and it should be everyone's 1st mod.


Sent from my iPhone using Tapatalk
Thanks. Great input.

onzedge 04-22-2016 07:55 PM
Quote:
Originally Posted by LAVA (Post 3465166)
:tup:

onzedge 04-22-2016 07:59 PM
I run the Stillen with no issues. I have a bit better throttle response.

My son loves working on my Z's...

http://scontent.fsnc1-1.fna.fbcdn.ne...bf&oe=57744CC6

onzedge 04-22-2016 07:59 PM
http://scontent.fsnc1-1.fna.fbcdn.ne...32&oe=57A790F0

onzedge 04-22-2016 08:00 PM
http://scontent.fsnc1-1.fna.fbcdn.ne...b2&oe=57BBD624

onzedge 04-22-2016 08:00 PM
http://scontent.fsnc1-1.fna.fbcdn.ne...b6&oe=57BD0B47

Rusty 04-22-2016 11:24 PM
Quote:
Originally Posted by Spooler (Post 3464878)
ATI damper and be done with it.
:iagree:

Quote:
Originally Posted by AntiVenom (Post 3465027)
That's the route I went. Rather have reliability than an extra 1whp.
:iagree:

onzedge 10-11-2016 12:59 PM
Quote:
Originally Posted by Rusty (Post 3466047)
:iagree:


:iagree:
:iagree:

Rusty 10-11-2016 01:25 PM
Quote:
Originally Posted by onzedge (Post 3564940)
:iagree:
:iagree:

Hotrodz 10-11-2016 01:32 PM
:iagree:

Sent from my SM-N910P using Tapatalk

Rusty 10-11-2016 06:39 PM
Quote:
Originally Posted by Rusty (Post 3466047)
:iagree:


:iagree:
Quote:
Originally Posted by onzedge (Post 3564940)
:iagree:
Quote:
Originally Posted by Rusty (Post 3564953)
:iagree:
Quote:
Originally Posted by Hotrodz (Post 3564957)
:iagree:

Sent from my SM-N910P using Tapatalk
:iagree:












:gtfo2:








:rofl2:

onzedge 10-11-2016 06:46 PM
Quote:
Originally Posted by Rusty (Post 3565108)
:iagree:












:gtfo2:








:rofl2:
:happyholidays:

Hotrodz 10-11-2016 10:50 PM
:gtfo2:

:iagree:

:leghump:

Rusty 10-12-2016 10:54 AM
Quote:
Originally Posted by Hotrodz (Post 3565174)

:leghump:
:iagree:

JARblue 10-12-2016 11:25 AM
Quote:
Originally Posted by Rusty (Post 3466047)
:iagree:


:iagree:
Quote:
Originally Posted by onzedge (Post 3564940)
:iagree:
Quote:
Originally Posted by Rusty (Post 3564953)
:iagree:
Quote:
Originally Posted by Hotrodz (Post 3564957)
:iagree:
Quote:
Originally Posted by Rusty (Post 3565108)
:iagree:
Quote:
Originally Posted by Hotrodz (Post 3565174)
:iagree:
Quote:
Originally Posted by Rusty (Post 3565350)
:iagree:
:roflpuke2:

Yes, ATI damper :iagree:


All times are GMT -5. The time now is 09:54 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2