Clutch Combo

ARrado15 · 04-07-2016, 05:06 AM

I've been through the forums for the past few days and just can't find anything to completely sell me on one brand or the other. Basically i'm a full bolt on NA as of right now, but plan on going Stillen SC in the near future. I am for sure getting the Z Speed HD CSC as well as a new master cylinder but that's all i've made my mind about. I would like a clutch that can obviously hold the Stillen SC, but not be too undriveable as it is also my DD. I've been looking at the Z1 Clutch and Flywheel combo pretty hard as its only $750 for both, but i'm not completely sold. What would you guys recommend?

astro932 · 04-07-2016, 08:05 AM

Anything made by ACT they build some of the best clutches out there, get the rjm performance pedal too

Jayhovah · 04-07-2016, 02:36 PM

I've got the Z1 combo in full face. I am happy with it, Daily Drive with it, and it handles my 520whp just fine. It's like half the price of most comparable Clutch/Flywheel packages.. save that extra cash and put it towards your SC plans.

ARrado15 · 04-07-2016, 06:29 PM

Would the Z1 Clutch Full Face hold the BP Twin Scroll? Or would I need their 6 puck?

Jayhovah · 04-07-2016, 07:06 PM

Quote:

Originally Posted by ARrado15

Would the Z1 Clutch Full Face hold the BP Twin Scroll? Or would I need their 6 puck?

Depends on your goals... But you should be just fine in the 500whp range. jwick has the BP kit and the Z1 full face clutch. He is the one who convinced me to get it, so I'm paying it forward

Sent from my Nexus 6 using Tapatalk

Chuck33079 · 04-07-2016, 07:08 PM

Skip the puck clutch on a daily driven car. It's unpleasant in traffic. And get the lightest flywheel you can, it's a nice upgrade if you can handle the noise.

ARrado15 · 04-11-2016, 12:19 AM

I ended up getting the full face. Not really down for that 6 puck life as a DD. Would have loved to get a twin, but was way to much money. Maybe someday :/

YzGyz · 04-11-2016, 01:18 AM

I have a 6 puck. It grabs hard every gear. You pretty much can't make a silky smooth shift from one gear to the other. I'm not new to driving standard cars. I have driven standard transmission for 16 years and 1000's of miles on many platforms and I still can;t make silky smooth shifts in my car. If you DD and don't plan to drag race much, get a full face. My car was built with dragging in mind so that's why I got it. If I have to ever replace my clutch/flywheel, I will get a twin disk.

YzGyz

ARrado15 · 04-11-2016, 02:06 AM

Yea I was really wanting a twin disk but they were just so expensive. I just couldn't justify it as it's going to be my DD with light track/drag race.

Jayhovah · 04-11-2016, 09:14 AM

Quote:

Originally Posted by YzGyz

I have a 6 puck. It grabs hard every gear. You pretty much can't make a silky smooth shift from one gear to the other. I'm not new to driving standard cars. I have driven standard transmission for 16 years and 1000's of miles on many platforms and I still can;t make silky smooth shifts in my car. If you DD and don't plan to drag race much, get a full face. My car was built with dragging in mind so that's why I got it. If I have to ever replace my clutch/flywheel, I will get a twin disk.

YzGyz

Have you tried the RJM clutch pedal? From what people say about it, it could help. Just curious, I don't have one myself but its on the future mod list.

1cleanZ · 04-11-2016, 09:32 AM

SOUTHBEND, OS GIKEN, and Specialty Z.

Only clutch setups you need to know....

Chuck33079 · 04-11-2016, 11:52 AM

Quote:

Originally Posted by 1cleanZ

SOUTHBEND, OS GIKEN, and Z1.

Only clutch setups you need to know....

Fixed. Specialty Z can choke on my hog.

jwick · 04-11-2016, 11:59 AM

Quote:

Originally Posted by ARrado15

Would the Z1 Clutch Full Face hold the BP Twin Scroll? Or would I need their 6 puck?

Holds my power just fine.

Currently tuned at 510/440 but the clutch has held 505/470 for over a year and thousands of miles.

From my experience there is no reason to spend the extra money on a clutch setup unless you are shooting for over 500wtq.

YzGyz · 04-11-2016, 12:43 PM

I have the RJM clutch. I have had it for a little while now. It's awesome but I still can't make butte smooth shifts. The puck just bites hard.

YzGyz

Jayhovah · 04-11-2016, 12:51 PM

Quote:

Originally Posted by YzGyz

I have the RJM clutch. I have had it for a little while now. It's awesome but I still can't make butte smooth shifts. The puck just bites hard.

YzGyz

Thanks that is good information.. Jon@Z1 recommended the 6-puck to me but I went with jwick's advice and got the full face... Sounds like I made the right choice for my situation (DD, no track).

04-07-2016, 05:06 AM	#1 (permalink)
ARrado15 Base Member Join Date: Nov 2015 Location: Las Vegas Posts: 96 Drives: 370z M6 Rep Power: 17	Clutch Combo I've been through the forums for the past few days and just can't find anything to completely sell me on one brand or the other. Basically i'm a full bolt on NA as of right now, but plan on going Stillen SC in the near future. I am for sure getting the Z Speed HD CSC as well as a new master cylinder but that's all i've made my mind about. I would like a clutch that can obviously hold the Stillen SC, but not be too undriveable as it is also my DD. I've been looking at the Z1 Clutch and Flywheel combo pretty hard as its only $750 for both, but i'm not completely sold. What would you guys recommend?

04-07-2016, 08:05 AM	#2 (permalink)
astro932 Base Member Join Date: Nov 2015 Location: Nebraska Posts: 119 Drives: 11 370z M6 Rep Power: 10	Anything made by ACT they build some of the best clutches out there, get the rjm performance pedal too YzGyz likes this. __________________ 6M vert My Build

04-07-2016, 07:08 PM	#6 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Skip the puck clutch on a daily driven car. It's unpleasant in traffic. And get the lightest flywheel you can, it's a nice upgrade if you can handle the noise. YzGyz likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

04-11-2016, 12:19 AM	#7 (permalink)
ARrado15 Base Member Join Date: Nov 2015 Location: Las Vegas Posts: 96 Drives: 370z M6 Rep Power: 17	I ended up getting the full face. Not really down for that 6 puck life as a DD. Would have loved to get a twin, but was way to much money. Maybe someday :/ YzGyz likes this. __________________ Stillen G3, Stillen CBE, Berk HFC, Eibach Springs, H&R Spacers, PW:JDM Knob, RJM Clutch Assembly, Z1 Clutch & Flywheel, Zspeed HD CSC, Stillen Oil Cooler

04-11-2016, 01:18 AM	#8 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	I have a 6 puck. It grabs hard every gear. You pretty much can't make a silky smooth shift from one gear to the other. I'm not new to driving standard cars. I have driven standard transmission for 16 years and 1000's of miles on many platforms and I still can;t make silky smooth shifts in my car. If you DD and don't plan to drag race much, get a full face. My car was built with dragging in mind so that's why I got it. If I have to ever replace my clutch/flywheel, I will get a twin disk. YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

04-07-2016, 06:29 PM	#4 (permalink)
ARrado15 Base Member Join Date: Nov 2015 Location: Las Vegas Posts: 96 Drives: 370z M6 Rep Power: 17	Would the Z1 Clutch Full Face hold the BP Twin Scroll? Or would I need their 6 puck?

04-11-2016, 02:06 AM	#9 (permalink)
ARrado15 Base Member Join Date: Nov 2015 Location: Las Vegas Posts: 96 Drives: 370z M6 Rep Power: 17	Yea I was really wanting a twin disk but they were just so expensive. I just couldn't justify it as it's going to be my DD with light track/drag race. __________________ Stillen G3, Stillen CBE, Berk HFC, Eibach Springs, H&R Spacers, PW:JDM Knob, RJM Clutch Assembly, Z1 Clutch & Flywheel, Zspeed HD CSC, Stillen Oil Cooler

04-11-2016, 09:32 AM	#11 (permalink)
1cleanZ A True Z Fanatic Join Date: Dec 2010 Location: Twin Cities, MN Posts: 1,132 Drives: '09 PW Nismo Rep Power: 21	SOUTHBEND, OS GIKEN, and Specialty Z. Only clutch setups you need to know.... __________________ 2009 PW Nismo #0021 -My Built Progress >>1cleanG to 1cleanZ<< Team NextLevel

04-11-2016, 12:43 PM	#14 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	I have the RJM clutch. I have had it for a little while now. It's awesome but I still can't make butte smooth shifts. The puck just bites hard. YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] JWT Clutch/Flywheel Combo Nissan 370Z 09+ Z34 & CSC w/ SS Clutch Line	R0bDC	Parts for sale (Private Classifieds)	2	08-16-2015 02:46 PM
Clutch flywheel combo?	bvar90	Engine & Drivetrain	25	07-04-2015 06:22 AM
JWT Clutch and Flywheel Combo	Muki350z	Nissan 370Z General Discussions	3	04-24-2015 05:25 PM
[FOR SALE] JWT Clutch & Flywheel combo with SS clutch line	DEpointfive0	Parts for sale (Private Classifieds)	10	10-31-2014 12:53 PM
Which Clutch and Flywheel combo?	V8Killer	Engine & Drivetrain	0	07-05-2011 01:02 AM