Help w/ Clutch Issues

slammedsammy · 03-09-2016, 12:36 PM

Heres my serious dilemma, I bought my Z used and I'm really not sure if the clutch may have been replaced already or what kind of shape it is in. I don't want to not replace the clutch since I'm already having work done...but I don't want to replace a perfectly good clutch...

Thoughts?

Chuck33079 · 03-09-2016, 12:40 PM

Buy the clutch and flywheel, and make the call when your mechanic gets the tranny on the ground. If you don't need the new clutch, return it and eat the restocking fee.

Jayhovah · 03-09-2016, 12:48 PM

My recommendation:
I still think only your CMC is failed. The part and labor are both cheap, so I say replace it and flush/bleed through some high quality DOT4 and see where you are.

If you're still having issues then, do what Chuck just said.

Chuck33079 · 03-09-2016, 12:50 PM

Quote:

Originally Posted by Jayhovah

My recommendation:
I still think only your CMC is failed. The part and labor are both cheap, so I say replace it and flush/bleed through some high quality DOT4 and see where you are.

If you're still having issues then, do what Chuck just said.

It can't hurt to do it this way. Worst case scenario you're just back to dropping the transmission, so you might as well see if you get lucky.

slammedsammy · 03-09-2016, 12:51 PM

Quote:

Originally Posted by Chuck33079

Buy the clutch and flywheel, and make the call when your mechanic gets the tranny on the ground. If you don't need the new clutch, return it and eat the restocking fee.

Good call, ordering parts today.

slammedsammy · 03-09-2016, 12:55 PM

Quote:

Originally Posted by Jayhovah

My recommendation:
I still think only your CMC is failed. The part and labor are both cheap, so I say replace it and flush/bleed through some high quality DOT4 and see where you are.

If you're still having issues then, do what Chuck just said.

I like the sound of this....

Jayhovah · 04-12-2016, 05:07 PM

So what happened?

stansens · 04-12-2016, 06:22 PM

The bearing itself would make noise whenever you press on clutch pedal even lightly. That said if the clutch engages at a very low point then many times air is in the system. Bad and mainly boiling fluid injects air. Moreover worn seals in the csc or cmc let's air in. As mentioned bleeding is the first thing to do. When in second or third gear try heavy acceleration and if engine speed rises quicker then the speed of the car then clutch is slipping. Usually a worn clutch disc is also accompanied by a very high pedal engagement.

03-09-2016, 12:36 PM	#31 (permalink)
slammedsammy Base Member Join Date: Nov 2015 Location: Akron, OH Posts: 159 Drives: 2009 370z Rep Power: 10	Heres my serious dilemma, I bought my Z used and I'm really not sure if the clutch may have been replaced already or what kind of shape it is in. I don't want to not replace the clutch since I'm already having work done...but I don't want to replace a perfectly good clutch... Thoughts? __________________ "It's nice to be important...but it's more important to be nice."

03-09-2016, 12:40 PM	#32 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Buy the clutch and flywheel, and make the call when your mechanic gets the tranny on the ground. If you don't need the new clutch, return it and eat the restocking fee. slammedsammy likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch bleeding BIG issues	edconline	Engine & Drivetrain	16	04-10-2014 09:00 AM
Clutch Issues on Nismo	MacLean	Nismo 370Z	20	01-08-2014 12:06 PM
Clutch and Transmission Issues	bboylegit	Engine & Drivetrain	6	09-11-2012 11:07 AM
2012 nismo clutch issues	pw_monster_z	Nismo 370Z	11	03-13-2012 06:33 PM
clutch pedal issues?	xgrudgex	Engine & Drivetrain	17	01-31-2011 09:44 PM

04-12-2016, 06:22 PM	#38 (permalink)
stansens Base Member Join Date: Nov 2015 Location: toronto, canada Posts: 144 Drives: 2016, 370z Rep Power: 192	The bearing itself would make noise whenever you press on clutch pedal even lightly. That said if the clutch engages at a very low point then many times air is in the system. Bad and mainly boiling fluid injects air. Moreover worn seals in the csc or cmc let's air in. As mentioned bleeding is the first thing to do. When in second or third gear try heavy acceleration and if engine speed rises quicker then the speed of the car then clutch is slipping. Usually a worn clutch disc is also accompanied by a very high pedal engagement.