GTM built 7 AT

shadow85 · 12-17-2016, 12:07 PM

Quote:

Originally Posted by Zat_Zuma

Interesting part about the shims. (need to check service manual)
The transmission cooler can be made with parts available locally. Combined with a good aftermarket radiator, should be a cool combination, which is probably needed if your boosting.

I would be interested in a Level 10 clutch paks kit, torque convertor, and valve body. That with the other parts could be done locally and be a killer combination. Not sure if I could do it though, as I need to read the manual.

Thanks for doing the legwork on this question.

I asked Pat from level 10 if their kit includes 'shim plates', he told me they do have 'steel plates'. I am guessing they are the same thing.

If you want the Level 10 Valve Body, you have to send in your VB to them. They only do it inhouse. Torque converter you can purchase on it's own from them.

So atm my trans upgrade will be something like:

F.I. Flex Plate
Level 10 Rebuild kit
Locally upgrade torque converter from here or order Level 10s TQ converter
19 Row Trans cooler
Line pressure adjust via UpRev

I wish I could do a VB upgrade, but it would cost me too much to ship my VB to LVL10 and back from Australia. And unfortunately no transmission specialist I have talked to so far in Australia can do a VB upgrade on the Z's 7AT.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Built Transmission	Elmo370z	Engine & Drivetrain	22	12-29-2014 06:09 AM
Real Auto Dynamics built and R/T tuned built motor TT	Mr.Squeeze	Forced Induction	132	04-18-2014 06:09 PM
Anyone have a built motor yet for FI?	GambitX	Forced Induction	61	08-22-2011 09:44 AM
Best 240Z ever built	Brazilbro	Other Vehicles	15	03-30-2011 11:27 AM
Where is the 370Z built?	gregp	Nissan 370Z Pricing / Ordering Discussions	3	08-09-2010 07:32 PM