Valve Noise?

TedB370z · 03-13-2016, 11:05 PM

I replaced all of the pulleys, belt tensioner, and new belt a few thousand miles ago.

I did what you said and rechecked everything on the front of the engine and everything is tight, no bearing noises or belt slipping etc. And the noise is definitely coming from the top of the engine near the firewall, its hard to nail down exactly as it doesn't always make the noise.

I'm going to try the ester oil next oil change. Its odd, to me it just sounds like overall the timing is off. Even on slow acceleration it sounds like its off a bit. If the guide is broken or sticky, could it have caused it to jump a tooth? is there an easy way to check this? I remember the 350z had covers on the front of the engine you could remove, but I know the 370 doesn't have those...

SouthArk370Z · 03-13-2016, 11:18 PM

If something major (like jumping a tooth) has happened, a DTC should have been thrown. If you haven't scanned for codes, that would be a good place to look.

TedB370z · 03-14-2016, 11:06 AM

Yep.. scanned with a snap-on verus, no CEL and no stored codes...

Its getting the roof fixed right now (car wash entrance door went into neutral and came down on it, luckily doesn't need replaced, just dents removed and repainted, $1,292, and car wash covered it all...)

03-13-2016, 11:18 PM	#17 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	If something major (like jumping a tooth) has happened, a DTC should have been thrown. If you haven't scanned for codes, that would be a good place to look. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Valve springs	Elmo370z	Engine & Drivetrain	10	08-03-2015 12:56 PM
Anyone tell me how bad this head/valve is?	chknhawk	Engine & Drivetrain	15	02-11-2014 08:59 AM
Increased Valve Noise After Change To Amsoil	iwasgointo	Nissan 370Z General Discussions	40	09-01-2010 04:34 PM
Valve Adjustment	370zFORme!!	Engine & Drivetrain	34	04-22-2010 03:21 AM

03-13-2016, 11:05 PM	#16 (permalink)
TedB370z Base Member Join Date: Aug 2013 Location: Pittsburgh, PA Posts: 87 Drives: 09 Nissan 370z Rep Power: 12	I replaced all of the pulleys, belt tensioner, and new belt a few thousand miles ago. I did what you said and rechecked everything on the front of the engine and everything is tight, no bearing noises or belt slipping etc. And the noise is definitely coming from the top of the engine near the firewall, its hard to nail down exactly as it doesn't always make the noise. I'm going to try the ester oil next oil change. Its odd, to me it just sounds like overall the timing is off. Even on slow acceleration it sounds like its off a bit. If the guide is broken or sticky, could it have caused it to jump a tooth? is there an easy way to check this? I remember the 350z had covers on the front of the engine you could remove, but I know the 370 doesn't have those...

03-14-2016, 11:06 AM	#18 (permalink)
TedB370z Base Member Join Date: Aug 2013 Location: Pittsburgh, PA Posts: 87 Drives: 09 Nissan 370z Rep Power: 12	Yep.. scanned with a snap-on verus, no CEL and no stored codes... Its getting the roof fixed right now (car wash entrance door went into neutral and came down on it, luckily doesn't need replaced, just dents removed and repainted, $1,292, and car wash covered it all...)