that's how mine run too:
http://images.tapatalk-cdn.com/16/01...96abeb3743.jpg

You have your lines going under the washer. Mine go over the top of it.

o yeah now I see, sorry I was looking at ur power steering lines or something on the bottom left

Yea, those are my power steering lines from my Z1 power steering cooler.

nice

Mine are ran just like this picture.

is urs the FI kit and if it is are your oil lines able to both make it over the sway bar? or 1 over 1 under

So..................how many 6 packs did you drink?

Finally got it to work!!. WIsh the lines were a little longer so i could run them on top the bumper and windshield. Last night cruising back from Orlando temps were 160 i was at 3,000 rpms

WHere the lines go under the windshield fluid did you have trouble with the lines bulging out a little?

I didn't have trouble there, are they touching your under tray there? cuz it shouldn't be that sharp of a turn where it should bulge in that spot

I used a few zip ties in that spot to hold it close the the radiator support and the next spot they should touch is the aluminum beam that's tuning vertical under the car and they get screwed in there with the clamps

I eventually got it tucked up and fitted the z speed undershroud.

None....LOL Moutain Dew + Marlboro's = Yes

Yes, a little. The only place I had an issue was running past the factory PS fluid cooler brackets. I put some rubber lines around the braided lines to protect them.