F.I. oil cooler

Spooler · 01-05-2016, 12:04 PM

Looks normal. I barely hit 160F by the time I got to work this morning. Outside temps were 33F. Rare to have those low temps here so I am not worried about it.

Elmo370z · 01-05-2016, 01:52 PM

Quote:

Originally Posted by Spooler

Looks normal. I barely hit 160F by the time I got to work this morning. Outside temps were 33F. Rare to have those low temps here so I am not worried about it.

ThANKS FOR putting my mind at ease.

Spooler · 01-05-2016, 02:05 PM

Quote:

Originally Posted by Elmo370z

ThANKS FOR putting my mind at ease.

NP, If I was farther north I would make a block-off plate for half of my cooler. I also have the FI 34 row with thermostatic plate.

Elmo370z · 01-05-2016, 07:22 PM

-8

Elmo370z · 01-06-2016, 07:04 PM

Anyone have a z speed under tray with a fi oil cooler kit?

Rusty · 01-06-2016, 09:47 PM

I got the 34 row Z1 cooler with the Zspeed under tray. Why?

Zoren 370 · 01-06-2016, 10:03 PM

He might be worried the sandwich plate would not clear the Z speed under tray?

I have a stillen oil cooler with thermostatic sandwich plate it clears the under tray and whitelines sway bars.

Elmo370z · 01-07-2016, 12:45 AM

Quote:

Originally Posted by Rusty

I got the 34 row Z1 cooler with the Zspeed under tray. Why?

How did you get the lines to tuck under?

Rusty · 01-07-2016, 04:07 AM

Quote:

Originally Posted by Elmo370z

How did you get the lines to tuck under?

How did you route the lines?

Elmo370z · 01-07-2016, 10:19 AM

Quote:

Originally Posted by Rusty

How did you route the lines?

Im about v to go back to the ship in a few

RBfastback · 01-06-2016, 10:30 PM

anyone able to get both the oil lines from the FI kit over the sway bar??

Elmo370z · 01-07-2016, 02:00 AM

Quote:

Originally Posted by RBfastback

anyone able to get both the oil lines from the FI kit over the sway bar??

I went behind middle support bar

RBfastback · 01-07-2016, 10:58 AM

I'm confused with this conversation

Rusty · 01-07-2016, 11:36 AM

In the picture. I have my oil lines routed in front of the filters, on top of the white foam bumper. Then they run down the side to the plate. They do not go under the sway bar.

RBfastback · 01-07-2016, 11:42 AM

Quote:

Originally Posted by Rusty

In the picture. I have my oil lines routed in front of the filters, on top of the white foam bumper. Then they run down the side to the plate. They do not go under the sway bar.

that's how mine run too:

01-05-2016, 07:22 PM	#4 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,724 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	-8 AV8rZ likes this.

01-06-2016, 09:47 PM	#6 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,354 Drives: 2011 Nismo GM 6M Rep Power: 2684438	I got the 34 row Z1 cooler with the Zspeed under tray. Why? __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
DIY: Oil cooler and radiator spray cooler with video	AnthonyD1978	Track / Autocross / Drifting / Dragstrip	24	08-14-2015 09:55 AM
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler	Dustin@Z1	Engine & Drivetrain	158	03-10-2014 02:27 PM
7AT 4.08 Gear swap QUAIFE LSD Trans cooler diff cooler	matcop	Engine & Drivetrain	17	09-07-2013 10:09 AM
[FOR SALE] AT Transmission Cooler with Setrab 19 Row cooler	zakimak	Parts for sale (Private Classifieds)	4	03-03-2012 11:44 AM

01-05-2016, 12:04 PM	#1 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,962 Drives: 2013 Nismo 370z Rep Power: 2684392	Looks normal. I barely hit 160F by the time I got to work this morning. Outside temps were 33F. Rare to have those low temps here so I am not worried about it.

01-06-2016, 07:04 PM	#5 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,724 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Anyone have a z speed under tray with a fi oil cooler kit?

01-06-2016, 10:03 PM	#7 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913654	He might be worried the sandwich plate would not clear the Z speed under tray? I have a stillen oil cooler with thermostatic sandwich plate it clears the under tray and whitelines sway bars.

01-06-2016, 10:30 PM	#11 (permalink)
RBfastback Enthusiast Member Join Date: Mar 2014 Location: FM, Florida Posts: 311 Drives: 13 370z Nismo PW Rep Power: 12	anyone able to get both the oil lines from the FI kit over the sway bar??

01-07-2016, 10:58 AM	#13 (permalink)
RBfastback Enthusiast Member Join Date: Mar 2014 Location: FM, Florida Posts: 311 Drives: 13 370z Nismo PW Rep Power: 12	I'm confused with this conversation