Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)
-   -   VVEL Actuator Holding Jigg!!!! (http://www.the370z.com/engine-drivetrain/108208-vvel-actuator-holding-jigg.html)

laytonanthony 10-14-2015 04:32 PM
VVEL Actuator Holding Jigg!!!!
 
Hi Guys
Had my engine re-built and engine builder didn't align the control shaft on the VVEL.
Rang my local Nissan dealer and they wanted £2,000.00 for one actuator.
I can re-use my existing actuators but obviously need to align them up.
Nobody in the UK has a zed that has seen the mileages over here in the US so work on the Vq37vhr engines has been to a very minimum.

If I could locate or find the 2x little plastic holding jigs it would make my life so much easier. Does anybody have any or know where could get them from?

Thanks in advance.
Anthony

MAMotorsports 10-15-2015 09:15 AM
Quote:
Originally Posted by laytonanthony (Post 3328255)
Hi Guys
Had my engine re-built and engine builder didn't align the control shaft on the VVEL.
Rang my local Nissan dealer and they wanted £2,000.00 for one actuator.
I can re-use my existing actuators but obviously need to align them up.
Nobody in the UK has a zed that has seen the mileages over here in the US so work on the Vq37vhr engines has been to a very minimum.

If I could locate or find the 2x little plastic holding jigs it would make my life so much easier. Does anybody have any or know where could get them from?

Thanks in advance.
Anthony

Shoot an email to Daelen@ma-motorsports. com and we should be able to find you something.

laytonanthony 10-15-2015 03:08 PM
Thanks for your help.
I've just sent an email

laytonanthony 10-19-2015 12:16 PM
Still on the look out for these jig's if anyone has any more recommendations!
thanks


All times are GMT -5. The time now is 07:25 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2