Good price for Stillen Oil Cooler?

Joker_J · 10-12-2015, 05:58 AM

Was wondering if $330 is a good price for a 25-row oil cooler with the thermostatic plate...

Spooler · 10-12-2015, 07:46 AM

I don't care for the Stillen oil cooler kits. The main reason is you can't use a factory Nissan oil filter. Look at Z1 or FI for a kit. You will want a Mocal thermostatic plate to keep oil temp up in the winter.

Joker_J · 10-12-2015, 11:17 AM

Quote:

Originally Posted by Spooler

I don't care for the Stillen oil cooler kits. The main reason is you can't use a factory Nissan oil filter. Look at Z1 or FI for a kit. You will want a Mocal thermostatic plate to keep oil temp up in the winter.

I don't mind changin up the oil filter but for the mocal thermostatic, whats the difference from that and the one that comes with the stillen one?

Chuck33079 · 10-12-2015, 11:35 AM

Quote:

Originally Posted by Spooler

Look at Z1 or FI for a kit.

Stillen is a lower quality kit than either of the above. Don't be cheap and do it right the first time.

ban25 · 10-12-2015, 05:38 PM

Also, spring for the 34-row cooler. You can never have enough cooling for this car.

Joker_J · 10-12-2015, 10:16 PM

Quote:

Originally Posted by Chuck33079

Stillen is a lower quality kit than either of the above. Don't be cheap and do it right the first time.

I see... but doesn't the 14 models already have a decent oil cooler? I don't really push the car, but when I do, it gets up to 210. I'm wondering cause i'll be getting the oil cooler kit for a good price and I only drive the car on weekends..i'll take a look into the other kits as well too lol

Quote:

Originally Posted by ban25

Also, spring for the 34-row cooler. You can never have enough cooling for this car.

Spooler · 10-12-2015, 10:39 PM

Get the FI kit. It will have everything you need to remove the factory oil heater/cooler. That's what I did.

Plus, you get the aircraft grade Teflon inserted braided lines with crimped fittings. They last a long long time.

10-12-2015, 05:58 AM	#1 (permalink)
Joker_J Track Member Join Date: Aug 2014 Location: The Ville, KY Posts: 580 Drives: 2014 NISSAN 370Z Rep Power: 13	Good price for Stillen Oil Cooler? Was wondering if $330 is a good price for a 25-row oil cooler with the thermostatic plate...

10-12-2015, 05:38 PM	#5 (permalink)
ban25 Enthusiast Member Join Date: Nov 2009 Location: SF, CA Posts: 339 Drives: 17 C7 Z06 M7 Rep Power: 66	Also, spring for the 34-row cooler. You can never have enough cooling for this car. __________________ 2017 Corvette Z06 7MT \| 1LE \| Stage 3 \| DSCSport

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 06:47 AM
Good daily driver powered by tesla for good price	cossie1600	Other Vehicles	22	08-30-2013 02:29 AM
OVERSTOCK - Stillen Gen 3 \| Good price!	vividracing	Drivetrain/Engine	6	12-14-2011 02:22 PM
STILLEN oil cooler kit + STILLEN power steering cooler = fit?	ZBW39	STILLEN	2	07-02-2010 02:08 PM

10-12-2015, 07:46 AM	#2 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,903 Drives: 2013 Nismo 370z Rep Power: 2684392	I don't care for the Stillen oil cooler kits. The main reason is you can't use a factory Nissan oil filter. Look at Z1 or FI for a kit. You will want a Mocal thermostatic plate to keep oil temp up in the winter.

10-12-2015, 10:39 PM	#7 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,903 Drives: 2013 Nismo 370z Rep Power: 2684392	Get the FI kit. It will have everything you need to remove the factory oil heater/cooler. That's what I did. Plus, you get the aircraft grade Teflon inserted braided lines with crimped fittings. They last a long long time.