Billet intake manifold

Elmo370z · 09-30-2015, 12:10 PM

Quote:

Originally Posted by FPenvy

yea but most lower port jobs ive seen are netting like 5 hp and cost a few hundred. at least for the money it be nice to have a nicer looking piece with my 5hp lol

i'm still at the fork in the road between do i spend $25k on boosting the Z or do i just get a different vehicle. so far waiting to go with a different vehicle still winning

Yeah 25k is alot. Im still going to n play the waiting game to stay NA. My turbo is a dry sump and a billet crank

FPenvy · 10-01-2015, 02:21 PM

they posted a flow video and it's pretty good.

the avg cylinder flow stock in rounded numbers was 190cm3

the avg cylinder flow of the new lower was 256cm3

that's a pretty decent increase. I would assume much more than the port and polish that I've seen most people do recently.

gbrettin · 10-01-2015, 02:49 PM

If they don't charge an arm and a leg they will sell quite a few I think.

Elmo370z · 10-01-2015, 02:50 PM

Quote:

Originally Posted by FPenvy

they posted a flow video and it's pretty good.

the avg cylinder flow stock in rounded numbers was 190cm3

the avg cylinder flow of the new lower was 256cm3

that's a pretty decent increase. I would assume much more than the port and polish that I've seen most people do recently.

Lol i just wrote them down to post, you brat me to the punch. Now is this a huge improvement i dont know these numbers. You know i dont speak Spanish

FPenvy · 10-01-2015, 03:04 PM

Quote:

Originally Posted by Elmo370z

Lol i just wrote them down to post, you brat me to the punch. Now is this a huge improvement i dont know these numbers. You know i dont speak Spanish

we have seen HP/TQ increases from people just porting stock OEM lowers so a lower purpose built should take those numbers even higher.

the numbers show around 25-30% increase in air flow volume. I have no idea what the increase is on an OEM ported lower to compare. so for now its hard to say. once they release and we see some dyno numbers that'll be the deciding factor.

lj909 · 10-01-2015, 03:08 PM

Add some JWT cams in the mix!

synolimit · 10-01-2015, 09:00 PM

A new lower doesnt make sense. It cant get any bigger vs porting unless you port the head too or you'll have a big lip. Obviously a machined piece will be more accurate vs hand porting or maybe give it a different shape or funnel? Maybe the runner length will get longer or shorter?? Will that add or move power around? If it does you could always take a oem lower and just machine the top or each side to shorten it. Hmmm what would a shorter lower do? What about machining a spacer making it longer?

We do need a uppet though!

synolimit · 10-01-2015, 09:08 PM

Quote:

Originally Posted by Elmo370z

Lol i just wrote them down to post, you brat me to the punch. Now is this a huge improvement i dont know these numbers. You know i dont speak Spanish

You could port the crap out of a oem lower, theres like 1/4" of metal between each runner but you cant port more than a few mm on the bottom or you open to much having a lip from the heads killing flow. Also the upper part cant go to big or the upper mani wont flow anymore and you cant port the upper mani to much cause you'll port into the gasket ring. So basically you can port the crap out of a oem lower increasing flow but the shape will turn into skinny top and bottom with a fat mid section. I have no idea what that'd do for flow design.

Rusty · 10-01-2015, 09:14 PM

It may flow a lot. But what about port velocity?

synolimit · 10-01-2015, 10:34 PM

Quote:

Originally Posted by Rusty

It may flow a lot. But what about port velocity?

Which the shape i descibed would do what do you think?

FPenvy · 10-02-2015, 08:28 AM

oh god port master scotty is here now

IBTL

Elmo370z · 10-02-2015, 10:30 AM

Lets keep.it civil lol. This is all good.information out here.

JARblue · 10-02-2015, 10:46 AM

Give me something that looks good and isn't one-off custom price range.

Elmo370z · 10-02-2015, 10:56 AM

I just want something that's going to flow

roplusbee · 10-03-2015, 07:23 PM

Quote:

Originally Posted by Elmo370z

I agree you with waiting on phunk. Hopefully it something badass or flows similar to 1slowzs manifold

Wait.....what? What is this one off intake manifold that you speak of? I definitely missed that memo!

10-01-2015, 02:49 PM	#33 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,284 Drives: Tricycle Rep Power: 589151	If they don't charge an arm and a leg they will sell quite a few I think. FPenvy likes this.

10-01-2015, 03:08 PM	#36 (permalink)
lj909 Track Member Join Date: May 2014 Location: Riverside Posts: 584 Drives: 40th 370Z Rep Power: 12	Add some JWT cams in the mix! __________________ PW 07 HR350Z R.I.P. Totaled by 82yr old woman 2010 40th Anniversary 370Z

10-01-2015, 09:00 PM	#37 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	A new lower doesnt make sense. It cant get any bigger vs porting unless you port the head too or you'll have a big lip. Obviously a machined piece will be more accurate vs hand porting or maybe give it a different shape or funnel? Maybe the runner length will get longer or shorter?? Will that add or move power around? If it does you could always take a oem lower and just machine the top or each side to shorten it. Hmmm what would a shorter lower do? What about machining a spacer making it longer? We do need a uppet though! hooey_b likes this. __________________ 13 370z-

10-01-2015, 09:14 PM	#39 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,220 Drives: 2011 Nismo GM 6M Rep Power: 2684438	It may flow a lot. But what about port velocity? Chuck33079 and hooey_b like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

10-02-2015, 10:30 AM	#42 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Lets keep.it civil lol. This is all good.information out here. synolimit likes this.

10-02-2015, 10:46 AM	#43 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Give me something that looks good and isn't one-off custom price range. 2011 Nismo#91 and FPenvy like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

10-02-2015, 10:56 AM	#44 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	I just want something that's going to flow

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] (BNIB) OEM Intake Manifold Gaskets///Exhaust Manifold Gaskets	BlkNismo	Parts for sale (Private Classifieds)	19	08-13-2016 01:01 PM
Z1 Intake Manifold	cranzy	Z1 Motorsports	3	08-13-2015 06:26 PM
Intake manifold	Elmo370z	Intake/Exhaust	5	08-04-2015 01:50 PM
z1 intake manifold	jamesj1996	Intake/Exhaust	2	10-02-2014 07:28 PM