Jim Wolf Cam testing for the VQ37VHR -- Results inside!

370Z JT

looks like close to 370 when you go back to the stock gears.

__________________

Spooler

Did Seb say what he thought about the C2 cams?

chuckie311

he was impressed with them..he had doubts because he hasn't seen good results with cams on NA cars..

__________________
Tuned by (Seb@Specialty-Z)
2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

Spooler

It always makes you feel good when someone that has tuned a ton of 370z's is impressed with a product. That means it is really good. The same cams are in my motor. I am just turbo charged. I hope they do what I want them to do. My purpose for them is better tip in and spool up time. Drivability reasons.

chuckie311

these are likely my last mods on the G it will be my daily driver..
next purchase is the Q50 or Q60 3.0t

good luck on your build.. i can't wait to pick the car up Tuesday and give it a test run on the freeway..ill give my input on them then.. i told Seb to take the car out for a test drive..

__________________
Tuned by (Seb@Specialty-Z)
2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

Whjaxn17

I wasn't aware there were that many cars running them. I have no complaints about them, and while they are expensive, plus law of diminishing returns and all that, I think they're worth decent power NA. I gained 30whp from an intake swap and cams. 93 pump gas both runs. Another 13 on top of that with E85. I don't really think the issue with intakes applies as they never let it get hot on the dyno for heat soak to really become a problem.

__________________
377whp/299wtq NA
704whp/519wtq, SOHO stage 2.5
IG: pearlywhite.z

chuckie311

here is my car being Dyno'd

https://www.instagram.com/p/BwkAHrwHuzK/

__________________
Tuned by (Seb@Specialty-Z)
2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

Whjaxn17

https://www.instagram.com/p/BsD1xyng..._web_copy_link

__________________
377whp/299wtq NA
704whp/519wtq, SOHO stage 2.5
IG: pearlywhite.z

chuckie311

with stock gearing i should be right around your numbers.. we will find out end of year that's when i'm switching back

__________________
Tuned by (Seb@Specialty-Z)
2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

chuckie311

just picked the car up and while it was 99% freeway driving all i can say is wow.. the mid range pull is very noticeable...while im out of town for the next 5 days when i get back the car will be fueled up on E85.. Big thanks to Seb and the crew for all of the hard work..

__________________
Tuned by (Seb@Specialty-Z)
2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

Whjaxn17

Yep, I was very pleased when I picked mine up from Z1. Congrats, hope you're as happy with them as I've been. I'm seriously jealous of your E85 access, though. It's almost a 2 hour drive 1 way for me to get some.

__________________
377whp/299wtq NA
704whp/519wtq, SOHO stage 2.5
IG: pearlywhite.z

chuckie311

while it was expensive to do i would say besides gears this was one of the best mods to date..car runs Fantastic..cant wait to fuel up with some E85 and take it out for some fun..

__________________
Tuned by (Seb@Specialty-Z)
2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

johnnydrama

Just ordered the JWT C2 Cams and supporting mods from Z1:

1 x JWT C2 Exhaust Camshaft Set - 370Z / G37 (VQ37VHR) () = $749.00
1 x VQ35HR / VQ37VHR Timing Cover O-Ring and Seal Kit () = $120.00
Include All Extras
1 x OEM VQ35HR / VQ37VHR Water Pump (B1010-JK20A) = $67.00
1 x OEM VQ35HR / VQ37VHR Oil Pump (15010-JK20D) = $196.00
1 x Boundary Engineering HR / VHR Billet Oil Pump Gears () = $399.00
1 x Z1 VQ HR / VHR Oil Pan Spacer () = $135.50
Include Ultra Grey RTV
1 x MOTUL 8100 Oil Change Bundle - 5w30 () = $99.94
Additional Quarts 1 Quart
Filter Type NISMO Oil Filter

Starting the tear down this weekend. Hoping to have the car delivered to @Dynosty by the end of the month for a re-tune. In addition to the JWT C2 Cams, since laying down the 341whp/271whp I have added the following:

-Z1 Ported Lower Intake Manifold
-Z1 Race Intakes from standard Z1 Intakes
-Z1 2-piece lightweight rotors
-Dewla Intake Guide

Trying to keep my expectations in check, but would be really excited to eclipse the 370whp/290wtq marks. Would put the HP per Liter around the 118 mark in between the Audi R8 (117.3) and the Ferrari F12TDF (122.2) which are the pinnacle of N/A Engine benchmarks.

__________________
358WHP/271WTQ BUILD THREAD

Whjaxn17

Looking forward to seeing the results. Do you have an instagram to follow along on the build?

__________________
377whp/299wtq NA
704whp/519wtq, SOHO stage 2.5
IG: pearlywhite.z

OptionZero

Random aside, didn't the S2000 make 120hp hp per L? 240hp, 2.0L F20 engine

__________________
OptionZero Build Thread