Jim Wolf Cam testing for the VQ37VHR -- Results inside!

SurfDog · 08-19-2017, 01:10 AM

I verified gen 2 cams on my heads coming from IPP. short block stage 2 from Z1. the car should be on the dyno by mid September

MAMotorsports · 08-21-2017, 03:31 PM

Quote:

Originally Posted by SurfDog

I verified gen 2 cams on my heads coming from IPP. short block stage 2 from Z1. the car should be on the dyno by mid September

You may want to double check this, as we are the only retailer of the C2 camshafts currently. They will have to buy them from me directly and I do not have any orders from them as of now.

-Daelen

SurfDog · 08-22-2017, 07:45 AM

Hmm I will. I just spoke with them and he said they only have been out for a week or so and he got them directly from JWT.

jrb55gh · 08-28-2017, 10:46 AM

Quote:

Originally Posted by chuckie311

here is what i have on my list of to dos so far..planning this for April or May of next year

JWT Stage 2 cams
suckerpunch upgraded oil pump

Stage 1 heads from import part pros
Heads inspected and cleaned
Heads redecked
Ported exhaust and intake runners
3 angle valve job
New OEM Valve stem seals installed
Valve Stem Heights set
Cold Clearance set for stock cams
Heads prepped and assembled

+1mm oversized valves

ported lower plenum

change plugs on car

change water pump

inspect timing chain

then a ecutek retune

The C2 cams should have an incredible midrange charge with the 350 HR plenum. I can't wait to see the dyno. Hope you will do one.

chuckie311 · 08-28-2017, 03:20 PM

Quote:

Originally Posted by jrb55gh

The C2 cams should have an incredible midrange charge with the 350 HR plenum. I can't wait to see the dyno. Hope you will do one.

while i am doing a before and after dyno its more than just cams i am doing so i wont have any true cam numbers..
this is my list

JWT Stage 2 cams
suckerpunch upgraded oil pump
Urethane Transmission Mount
Urethane Motor Mounts
Ported throttle bodies
ported lower plenum
new spark plugs
new water pump
Wilwood Big Brake Kit, Front & Rear
3 inch intake (AdminTuning)

Ape Factory · 08-28-2017, 10:40 PM

MA, can you comment on the G37 that gained like 60+ wheel hp? I saw the post on Facebook but I'd like more information. I understand the changes were Motordyne headers, C2 cams and I'm assuming a tune.

I don't know what dyno you're using but noticed the baseline numbers were like 220 something. Just wondering if you could elaborate further.

chuckie311 · 08-28-2017, 10:52 PM

Quote:

Originally Posted by Ape Factory

MA, can you comment on the G37 that gained like 60+ wheel hp? I saw the post on Facebook but I'd like more information. I understand the changes were Motordyne headers, C2 cams and I'm assuming a tune.

I don't know what dyno you're using but noticed the baseline numbers were like 220 something. Just wondering if you could elaborate further.

They use a Dynamics dyno... go to post 278 in this thread

ChrisPerrera · 08-29-2017, 12:16 AM

Quote:

Originally Posted by Ape Factory

MA, can you comment on the G37 that gained like 60+ wheel hp? I saw the post on Facebook but I'd like more information. I understand the changes were Motordyne headers, C2 cams and I'm assuming a tune.

I don't know what dyno you're using but noticed the baseline numbers were like 220 something. Just wondering if you could elaborate further.

It was 225-230 for base dyno with only gen2 stillen intakes. After c2cams, gen3 stillen upgrade kit, Motordyne lth, hks exhaust, ecutek tune it made like 297 so roughly 70 whp. I only have the paper Dyno, but they should have a PDF of it.

Sent from my LG-H910 using Tapatalk

Ape Factory · 08-29-2017, 12:24 AM

Is this your car? With the Motordyne LTH's, test pipes I'm assuming?

derraj06 · 08-29-2017, 11:05 AM

Wanted to check back in on this thread now that the car has been on the track for a few sessions. I was sharing the car with a friend in beginner so the car go some major abuse over three days at Gridlife South.

My first impression was of how much more usable power the car makes. I am shifting much less at Road Atlanta with no FD change and an increase in aero loads. I have all but stopped using 3rd gear when I have a clean track. The one exception is T7. With a couple good runs through T6 and T7 I was able to consistently reach a top speed of 155 mph at around the 300 foot marker going into T10A. There was another 370 running a different group saying he was only able to get to around 130 at the same point so there's definitely a significant increase in usable power. Still hoping to go to Z1 sooner than later and put it on their dyno for NASA classification purposes as I don't have a dyno locally to me that has ever had a Z car on it.

On a side note, the sucker punch oil pump handles many runs up to 7900 RPM without issue. I was not able to get my pressure gauge in the car before the event but I have another track weekend in September and I hope to have my gauges in by then after I sort out some heat related issues with the rear brakes.

Elmo370z · 08-29-2017, 01:30 PM

Quote:

Originally Posted by derraj06

Wanted to check back in on this thread now that the car has been on the track for a few sessions. I was sharing the car with a friend in beginner so the car go some major abuse over three days at Gridlife South.

My first impression was of how much more usable power the car makes. I am shifting much less at Road Atlanta with no FD change and an increase in aero loads. I have all but stopped using 3rd gear when I have a clean track. The one exception is T7. With a couple good runs through T6 and T7 I was able to consistently reach a top speed of 155 mph at around the 300 foot marker going into T10A. There was another 370 running a different group saying he was only able to get to around 130 at the same point so there's definitely a significant increase in usable power. Still hoping to go to Z1 sooner than later and put it on their dyno for NASA classification purposes as I don't have a dyno locally to me that has ever had a Z car on it.

On a side note, the sucker punch oil pump handles many runs up to 7900 RPM without issue. I was not able to get my pressure gauge in the car before the event but I have another track weekend in September and I hope to have my gauges in by then after I sort out some heat related issues with the rear brakes.

Holy **** you hit 155 on the back stretch. Wow. Yeah I only manage to break little over 130. With a slipping clutch

MAMotorsports · 08-29-2017, 03:45 PM

Quote:

Originally Posted by Ape Factory

MA, can you comment on the G37 that gained like 60+ wheel hp? I saw the post on Facebook but I'd like more information. I understand the changes were Motordyne headers, C2 cams and I'm assuming a tune.

I don't know what dyno you're using but noticed the baseline numbers were like 220 something. Just wondering if you could elaborate further.

Hey,

What Chris posted above is spot on, the car came to us nearly stock with Stillen Gen2 intakes.

We added:
C2 cams
Gen 3 intake conversion
Motordyne LTH
HKS Hi-Power Exhaust
MA-Motorsports tune using ECUtek

Baseline was 229hp when it came here, left with 297

Car was a 2010 G37 7spd Auto

ChrisPerrera · 08-29-2017, 08:09 PM

Quote:

Originally Posted by MAMotorsports

Hey,

What Chris posted above is spot on, the car came to us nearly stock with Stillen Gen2 intakes.

We added:
C2 cams
Gen 3 intake conversion
Motordyne LTH
HKS Hi-Power Exhaust
MA-Motorsports tune using ECUtek

Baseline was 229hp when it came here, left with 297

Car was a 2010 G37 7spd Auto

Thanks for the digital Dyno printout. I've got a few ideas for the future for the car, I will give you a call soon to update you on the car and discuss future plans for the car.

Thanks again

Sent from my LG-H910 using Tapatalk

chuckie311 · 08-30-2017, 03:47 PM

Question for MAMotorsports does the C2 cam make power past the 8k mark?
or have you not taking any car past that point yet

Elmo370z · 08-30-2017, 06:31 PM

Valve float issues on the intake side

08-19-2017, 01:10 AM	#316 (permalink)
SurfDog A True Z Fanatic Join Date: May 2012 Location: Colorado (9000 feet) Age: 56 Posts: 1,796 Drives: 09 6mt, 13 Sequoia, Rep Power: 15749	I verified gen 2 cams on my heads coming from IPP. short block stage 2 from Z1. the car should be on the dyno by mid September Rusty likes this. __________________ 09 6spd Berk CBE, JWT cams, ZSpeed CSC, Stillen (25 row oil, brake cooling, sways, gen3 CAI), Passport (9500ci), Quaife LSD, Z1 400 hp kit, ss lines, pads, rotors, clutch etc, Phunk's pan and fuel starve fix

08-22-2017, 07:45 AM	#318 (permalink)
SurfDog A True Z Fanatic Join Date: May 2012 Location: Colorado (9000 feet) Age: 56 Posts: 1,796 Drives: 09 6mt, 13 Sequoia, Rep Power: 15749	Hmm I will. I just spoke with them and he said they only have been out for a week or so and he got them directly from JWT. __________________ 09 6spd Berk CBE, JWT cams, ZSpeed CSC, Stillen (25 row oil, brake cooling, sways, gen3 CAI), Passport (9500ci), Quaife LSD, Z1 400 hp kit, ss lines, pads, rotors, clutch etc, Phunk's pan and fuel starve fix

08-28-2017, 10:40 PM	#321 (permalink)
Ape Factory Base Member Join Date: Apr 2016 Location: San Antonio Posts: 210 Drives: Audi RS5/QX70S Rep Power: 9	MA, can you comment on the G37 that gained like 60+ wheel hp? I saw the post on Facebook but I'd like more information. I understand the changes were Motordyne headers, C2 cams and I'm assuming a tune. I don't know what dyno you're using but noticed the baseline numbers were like 220 something. Just wondering if you could elaborate further. __________________ '13 Audi RS5 Misano w/mods-The Red Mist '13 G37 IPL-SOLD

08-29-2017, 12:24 AM	#324 (permalink)
Ape Factory Base Member Join Date: Apr 2016 Location: San Antonio Posts: 210 Drives: Audi RS5/QX70S Rep Power: 9	Is this your car? With the Motordyne LTH's, test pipes I'm assuming? __________________ '13 Audi RS5 Misano w/mods-The Red Mist '13 G37 IPL-SOLD

08-29-2017, 11:05 AM	#325 (permalink)
derraj06 Enthusiast Member Join Date: Jun 2013 Location: Huntsville, AL Posts: 406 Drives: MB 370z Rep Power: 12	Wanted to check back in on this thread now that the car has been on the track for a few sessions. I was sharing the car with a friend in beginner so the car go some major abuse over three days at Gridlife South. My first impression was of how much more usable power the car makes. I am shifting much less at Road Atlanta with no FD change and an increase in aero loads. I have all but stopped using 3rd gear when I have a clean track. The one exception is T7. With a couple good runs through T6 and T7 I was able to consistently reach a top speed of 155 mph at around the 300 foot marker going into T10A. There was another 370 running a different group saying he was only able to get to around 130 at the same point so there's definitely a significant increase in usable power. Still hoping to go to Z1 sooner than later and put it on their dyno for NASA classification purposes as I don't have a dyno locally to me that has ever had a Z car on it. On a side note, the sucker punch oil pump handles many runs up to 7900 RPM without issue. I was not able to get my pressure gauge in the car before the event but I have another track weekend in September and I hope to have my gauges in by then after I sort out some heat related issues with the rear brakes. Rusty and Hotrodz like this. __________________ 2010 Monterey Blue 370Z

08-30-2017, 03:47 PM	#329 (permalink)
chuckie311 Enthusiast Member Join Date: Jul 2012 Location: las vegas Posts: 313 Drives: Q50/G37 Rep Power: 13	Question for MAMotorsports does the C2 cam make power past the 8k mark? or have you not taking any car past that point yet __________________ Tuned by (Seb@Specialty-Z) 2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

08-30-2017, 06:31 PM	#330 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Valve float issues on the intake side

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OEM Denso VQ37VHR Fuel injector Flow Test results	MILENKOGT	Engine & Drivetrain	13	08-30-2015 05:52 PM
GTM Stage 2 Supercharger Preliminary Testing Results	SAM@GTM	Forced Induction	576	01-15-2014 10:40 PM
Uprev Tuned at Z1, results inside :)	'10Anamoly	Tuning	12	01-01-2012 01:32 PM
1/4 mile results inside	ZforMe	Track / Autocross / Drifting / Dragstrip	32	04-24-2009 08:27 AM
Knock on the VQ37VHR - gear heads step inside	BerkTech	Intake/Exhaust	39	04-13-2009 11:37 AM