Jim Wolf Cam testing for the VQ37VHR -- Results inside!

James10694 · 02-03-2017, 05:14 AM

Quote:

Originally Posted by chuckie311

take the drive to Specialty Z..
Seb has done all the work on my car..
and when i do my engine build he will be doing that as well

I have thought about it, but It would be difficult to find someone willing to drive to cali and back twice... and sending the heads via mail sounds like a long term investment. I need a daily

James10694 · 02-03-2017, 05:33 AM

While we're on the cam subject in this thread there's something I've always been curious about. Do you guys think we could make some decent NA power with cams headers exhaust and a stroker kit/built engine and 11:1 compression ? I'm aware of 1SlowZs build I've read the entire thread twice. If I'm not mistaken he had just a built bottom end in terms of engine work. Is the dry sump and high rpm really the only solution to making more power NA? I know this isn't an LS engine and the VVEL limits us significantly, but why hasn't this been attempted before?

Just curious if you guys who are more mechanically inclined could answer this. I don't think it's been done before considering the cost would be similar if not more versus going TT

Hotrodz · 02-03-2017, 08:52 AM

Quote:

Originally Posted by James10694

I have thought about it, but It would be difficult to find someone willing to drive to cali and back twice... and sending the heads via mail sounds like a long term investment. I need a daily

Let me know if you need a hand with this as I might be able to help you out! That is the great thing about the forum...you got friends everywhere!

Elmo370z · 02-05-2017, 09:15 PM

Quote:

Originally Posted by James10694

While we're on the cam subject in this thread there's something I've always been curious about. Do you guys think we could make some decent NA power with cams headers exhaust and a stroker kit/built engine and 11:1 compression ? I'm aware of 1SlowZs build I've read the entire thread twice. If I'm not mistaken he had just a built bottom end in terms of engine work. Is the dry sump and high rpm really the only solution to making more power NA? I know this isn't an LS engine and the VVEL limits us significantly, but why hasn't this been attempted before?

Just curious if you guys who are more mechanically inclined could answer this. I don't think it's been done before considering the cost would be similar if not more versus going TT

Why this hasn't been attempted, because the money it takes to get decent horsepower cost just as much as buying a TT kit and upgraded fuel system. You answered your own question.

Z eliminator · 02-07-2017, 09:41 AM

I will be running my 4.5 stroker N/A with full bolt on's
the Block is at Darton now being sleeved now.
The heads are done and my Jun cams should be installed in them, stage 3 GTM
Stillen headers, test pipes, stillen intake, stillen exhaust, 4.08 gears with a stage 4 GTM 7 AT.
11.1 comp, 3200 rpm stall torque converter
will dyno with the M370 intake and the factory intake as well.

Its taken a long time it should make around 385 to 390 RWHP N/A, the 3.7 with the same mod's less heads makes 304 to 309 rwhp. base line was 264
I have the GTM stage 2 SC going on after the 1/4 mile runs.
it should run 11.87 N/A, 10.92 with the SC
it should be on the road late summer
Its not being built by Gamma, but by the company who designed the stroker for GTM.

Z

jaytirbhaw · 02-07-2017, 11:34 AM

Quote:

Originally Posted by Z eliminator

I will be running my 4.5 stroker N/A with full bolt on's
the Block is at Darton now being sleeved now.
The heads are done and my Jun cams should be installed in them, stage 3 GTM
Stillen headers, test pipes, stillen intake, stillen exhaust, 4.08 gears with a stage 4 GTM 7 AT.
11.1 comp, 3200 rpm stall torque converter
will dyno with the M370 intake and the factory intake as well.

Its taken a long time it should make around 385 to 390 RWHP N/A, the 3.7 with the same mod's less heads makes 304 to 309 rwhp. base line was 264
I have the GTM stage 2 SC going on after the 1/4 mile runs.
it should run 11.87 N/A, 10.92 with the SC
it should be on the road late summer
Its not being built by Gamma, but by the company who designed the stroker for GTM.

Z

dude how many years has your car been under construction for ?

SS_Firehawk · 02-07-2017, 01:36 PM

Have to admire Zeliminator's persistence. He gets trolled and keeps going; albeit slooooowly.

Elmo370z · 02-07-2017, 04:34 PM

Quote:

Originally Posted by Z eliminator

I will be running my 4.5 stroker N/A with full bolt on's
the Block is at Darton now being sleeved now.
The heads are done and my Jun cams should be installed in them, stage 3 GTM
Stillen headers, test pipes, stillen intake, stillen exhaust, 4.08 gears with a stage 4 GTM 7 AT.
11.1 comp, 3200 rpm stall torque converter
will dyno with the M370 intake and the factory intake as well.

Its taken a long time it should make around 385 to 390 RWHP N/A, the 3.7 with the same mod's less heads makes 304 to 309 rwhp. base line was 264
I have the GTM stage 2 SC going on after the 1/4 mile runs.
it should run 11.87 N/A, 10.92 with the SC
it should be on the road late summer
Its not being built by Gamma, but by the company who designed the stroker for GTM.

Z

I can't wait to see the build. You dont think you will break 400whp?

Z eliminator · 02-07-2017, 04:44 PM

Its been 3 years that GTM had the motor.
And Gamma promised that they would take car of it (hung me out to dry ) they did nothing.
Great customer service !!!!!!!!!!!!!
the shop who is doing the work are great people, they are very busy and are doing me a great favor by helping me, or I would be out 26000.00 US dollars.
I will post dynos
The Dyno that I use is a dyno jet. its a heart breaker, it reads low and I post my #s in SAE.
I estimate that my 3.7 made around 340 RWHP to run 12.32 and to trap at 114.14
according to the drag racing calculators
the 4.5 should make round 410 to 420 according to Sam at GTM

any way lets get back to the Wolf Cams

I can not wait to see how they work.

Z

James10694 · 02-07-2017, 11:32 PM

The heartache and misfortune eliminator had to go thru must've been unbearable. Good luck to you man. You are the only Z I know of running a cammed built engine NA.

Hopefully these new stage 2 cams unlock some more power when they come out

brucelidat · 02-23-2017, 12:42 AM

Did we ever get a dyno of a before and after where the before had all the common mods most of us already have??

brucelidat · 04-13-2017, 08:53 PM

Has anyone installed these on a TT'ed Z yet?

Spooler · 04-13-2017, 09:10 PM

Quote:

Originally Posted by brucelidat

Has anyone installed these on a TT'ed Z yet?

Yes, someone has. The work was done at MA Motorsports. FI TT kit. User name started with a K. Hang on, I will find the thread.

My 09 NISMO Fast Intentions TT Build

ChrisPerrera · 06-20-2017, 09:49 AM

Hey, MAMotorsports. How are those cams coming along?

PongSanity · 06-20-2017, 11:58 AM

Time to get back active on this thread....

02-03-2017, 05:33 AM	#242 (permalink)
James10694 Track Member Join Date: Oct 2013 Location: Las Vegas NV Posts: 918 Drives: 2010 370z Nismo Rep Power: 13	While we're on the cam subject in this thread there's something I've always been curious about. Do you guys think we could make some decent NA power with cams headers exhaust and a stroker kit/built engine and 11:1 compression ? I'm aware of 1SlowZs build I've read the entire thread twice. If I'm not mistaken he had just a built bottom end in terms of engine work. Is the dry sump and high rpm really the only solution to making more power NA? I know this isn't an LS engine and the VVEL limits us significantly, but why hasn't this been attempted before? Just curious if you guys who are more mechanically inclined could answer this. I don't think it's been done before considering the cost would be similar if not more versus going TT __________________ Boosted Performance Single Turbo 618whp/489 tq

02-07-2017, 09:41 AM	#245 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	I will be running my 4.5 stroker N/A with full bolt on's the Block is at Darton now being sleeved now. The heads are done and my Jun cams should be installed in them, stage 3 GTM Stillen headers, test pipes, stillen intake, stillen exhaust, 4.08 gears with a stage 4 GTM 7 AT. 11.1 comp, 3200 rpm stall torque converter will dyno with the M370 intake and the factory intake as well. Its taken a long time it should make around 385 to 390 RWHP N/A, the 3.7 with the same mod's less heads makes 304 to 309 rwhp. base line was 264 I have the GTM stage 2 SC going on after the 1/4 mile runs. it should run 11.87 N/A, 10.92 with the SC it should be on the road late summer Its not being built by Gamma, but by the company who designed the stroker for GTM. Z Elmo370z, bmstitt and James10694 like this. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015. Last edited by Z eliminator; 02-07-2017 at 09:44 AM.

02-07-2017, 01:36 PM	#247 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	Have to admire Zeliminator's persistence. He gets trolled and keeps going; albeit slooooowly. Spartan 1771, jaytirbhaw, Rusty and 3 others like this. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

02-07-2017, 04:44 PM	#249 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	Its been 3 years that GTM had the motor. And Gamma promised that they would take car of it (hung me out to dry ) they did nothing. Great customer service !!!!!!!!!!!!! the shop who is doing the work are great people, they are very busy and are doing me a great favor by helping me, or I would be out 26000.00 US dollars. I will post dynos The Dyno that I use is a dyno jet. its a heart breaker, it reads low and I post my #s in SAE. I estimate that my 3.7 made around 340 RWHP to run 12.32 and to trap at 114.14 according to the drag racing calculators the 4.5 should make round 410 to 420 according to Sam at GTM any way lets get back to the Wolf Cams I can not wait to see how they work. Z James10694 likes this. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015. Last edited by Z eliminator; 02-07-2017 at 04:49 PM.

02-07-2017, 11:32 PM	#250 (permalink)
James10694 Track Member Join Date: Oct 2013 Location: Las Vegas NV Posts: 918 Drives: 2010 370z Nismo Rep Power: 13	The heartache and misfortune eliminator had to go thru must've been unbearable. Good luck to you man. You are the only Z I know of running a cammed built engine NA. Hopefully these new stage 2 cams unlock some more power when they come out __________________ Boosted Performance Single Turbo 618whp/489 tq

02-23-2017, 12:42 AM	#251 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	Did we ever get a dyno of a before and after where the before had all the common mods most of us already have?? __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

04-13-2017, 08:53 PM	#252 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	Has anyone installed these on a TT'ed Z yet? __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

06-20-2017, 09:49 AM	#254 (permalink)
ChrisPerrera Base Member Join Date: Apr 2017 Location: Maryland Posts: 6 Drives: 10' G37s White 7AT Rep Power: 8	Hey, MAMotorsports. How are those cams coming along? MAMotorsports likes this.

06-20-2017, 11:58 AM	#255 (permalink)
PongSanity Enthusiast Member Join Date: Jul 2014 Location: Virgin Islands Posts: 261 Drives: '09 G37s KH3 6MT Rep Power: 11	Time to get back active on this thread....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OEM Denso VQ37VHR Fuel injector Flow Test results	MILENKOGT	Engine & Drivetrain	13	08-30-2015 05:52 PM
GTM Stage 2 Supercharger Preliminary Testing Results	SAM@GTM	Forced Induction	576	01-15-2014 10:40 PM
Uprev Tuned at Z1, results inside :)	'10Anamoly	Tuning	12	01-01-2012 01:32 PM
1/4 mile results inside	ZforMe	Track / Autocross / Drifting / Dragstrip	32	04-24-2009 08:27 AM
Knock on the VQ37VHR - gear heads step inside	BerkTech	Intake/Exhaust	39	04-13-2009 11:37 AM