![]() |
Originally Posted by MAMotorsports From everything we have seen, we agree! Not agree, based on what? Any comparison?
|
![]() |
|
LinkBack | Thread Tools | Display Modes |
|
![]() |
#2 (permalink) |
Track Member
Join Date: Jul 2015
Location: Glen Arm, MD
Posts: 872
Drives: 370Z
Rep Power: 17 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Just based on the dyno graph on the first page compared to the ones available for the JUN cams on similar set ups(Not the built high compression motor). There have also been some issues with the JUN cams idling correctly without having to bump the idle RPM up considerably, not something we like to do on most street applications. The other huge selling point is state side customer support, I realize this does not have an impact on you. But JWT has been tremendous to work with, and takes very good care of their customers via quick support and a vast knowledge of the VQ platform. JUN is very hard to communicate with here in the US, so its a hard product to support with any questions that need to be answered.
__________________
Daelen @ MA Motorsports MA-Motorsports.com https://www.facebook.com/pages/MA-Mo...C/125379858828 |
![]() |
![]() |
![]() |
#3 (permalink) | |
Base Member
Join Date: Dec 2012
Location: Russia
Posts: 209
Drives: 370Z "Authentic"
Rep Power: 13 ![]() |
![]() Quote:
Idle issue can be solved by consult, after cams installation and VVEL plus Throttle reset procedure. Didn't suffer any major issue with JUN cams, everything is straight forward. I guess the same procedure as with JWT cams, but here there're no springs etc You're right about support, but then what kind of support you need from manufacturer If we're talking about bolt-on solution. The only one answer I did asked Junichi-san was: "what is the clearance?" As whole instruction was written on Japanese) |
|
![]() |
![]() |
![]() |
#4 (permalink) | |
A True Z Fanatic
Join Date: Dec 2009
Location: 03350 Australia
Posts: 1,515
Drives: 09 Nissan 370Z M6
Rep Power: 39974 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
|
|
![]() |
![]() |
![]() |
#5 (permalink) |
Track Member
Join Date: Jul 2015
Location: Glen Arm, MD
Posts: 872
Drives: 370Z
Rep Power: 17 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Ill shoot you a PM with his contact info, as I do not know exact prices. Pretty excited about your build, have spoken with them about it a few times!
__________________
Daelen @ MA Motorsports MA-Motorsports.com https://www.facebook.com/pages/MA-Mo...C/125379858828 |
![]() |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
OEM Denso VQ37VHR Fuel injector Flow Test results | MILENKOGT | Engine & Drivetrain | 13 | 08-30-2015 04:52 PM |
GTM Stage 2 Supercharger Preliminary Testing Results | SAM@GTM | Forced Induction | 576 | 01-15-2014 09:40 PM |
Uprev Tuned at Z1, results inside :) | '10Anamoly | Tuning | 12 | 01-01-2012 12:32 PM |
1/4 mile results inside | ZforMe | Track / Autocross / Drifting / Dragstrip | 32 | 04-24-2009 07:27 AM |
Knock on the VQ37VHR - gear heads step inside | BerkTech | Intake/Exhaust | 39 | 04-13-2009 10:37 AM |