Nissan 370Z Forum
Page 9 of 43 « First 78 9 101119 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)
-   -   Jim Wolf Cam testing for the VQ37VHR -- Results inside! (http://www.the370z.com/engine-drivetrain/107674-jim-wolf-cam-testing-vq37vhr-results-inside.html)

synolimit 02-19-2016 04:04 PM
Maybe one day for me then.

ban25 02-19-2016 05:36 PM
Quote:
Originally Posted by synolimit (Post 3418077)
Maybe one day for me then.
I have these cams going into my new engine build. Will post numbers when I have them.

Elmo370z 02-19-2016 10:39 PM
Quote:
Originally Posted by MAMotorsports (Post 3400573)
We have zero issues with shipping cars or engines :) If you would like to shoot me a call, would be more than happy to chat! 410-593-7080

We have a shipper that is from out west that has taken care of a few of our customers cars.
What is the cost of the shipper?

BGTV8 02-20-2016 04:18 AM
Quote:
Originally Posted by MAMotorsports (Post 3399862)
Just based on the dyno graph on the first page compared to the ones available for the JUN cams on similar set ups(Not the built high compression motor). There have also been some issues with the JUN cams idling correctly without having to bump the idle RPM up considerably, not something we like to do on most street applications.


The other huge selling point is state side customer support, I realize this does not have an impact on you. But JWT has been tremendous to work with, and takes very good care of their customers via quick support and a vast knowledge of the VQ platform. JUN is very hard to communicate with here in the US, so its a hard product to support with any questions that need to be answered.
I absolutely agree with your comment about JWT - they are very helpful folks and get back with responses quickly.

MAMotorsports 02-22-2016 10:12 AM
Quote:
Originally Posted by Elmo370z (Post 3418346)
What is the cost of the shipper?

Ill shoot you a PM with his contact info, as I do not know exact prices.

Quote:
Originally Posted by BGTV8 (Post 3418400)
I absolutely agree with your comment about JWT - they are very helpful folks and get back with responses quickly.
Pretty excited about your build, have spoken with them about it a few times!

Elmo370z 02-22-2016 11:39 AM
Quote:
Originally Posted by MAMotorsports (Post 3419727)
Ill shoot you a PM with his contact info, as I do not know exact prices.



Pretty excited about your build, have spoken with them about it a few times!
Sounds good thank you.

Elmo370z 03-06-2016 02:17 AM
Quote:
Originally Posted by MAMotorsports (Post 3318543)
List is $21.63 each(12 needed) so expect around that but a little cheaper normally.
Im on the nissan website trying to find these cam buckets. Could you please navigate me to the part number so i can go to my dealership and purchase these.

MAMotorsports 03-07-2016 08:53 AM
Quote:
Originally Posted by Elmo370z (Post 3430261)
Im on the nissan website trying to find these cam buckets. Could you please navigate me to the part number so i can go to my dealership and purchase these.


The Base part # is 13231-EY00, but you need to measure and get the correct size. We normally just spec them out when we build the heads and order them.

Elmo370z 03-07-2016 10:42 AM
Ok gotcha, guess I'll just wait then. Thank you

Elmo370z 04-10-2016 05:11 PM
Any updates on the stage 2 cam?

Elmo370z 04-13-2016 09:43 PM
bumps

zer099 04-14-2016 12:46 PM
I called JWT and asked about the timeline for stage 2 cams last week and they said (and this is paraphrasing): its set to be looked at later this year but is not something I would hold your breath for to be released within this year. In a nut shell they were very vague and noncommittal to a time-frame, and that's understandable. They said they haven't started development but have plans to do so this year. And that's all understandable as we all know how we get when we are told a date then it takes longer.

What I pulled from the phone call was "if your planing on pulling the engine this year and want cams the ones that are out are the ones you get. If your not committed and want to wait a year, give or take, we 'should' have a stage 2 by then."

Stage 2 is planed to be more aggressive and get the most they can get from the VHR. I asked if it was to be cut with more intention of being a FI cam or for NA and they said they wanted it to benefit both equally and not be bias more towards one than the other when it comes to it.

So... take from that what you will.

MAMotorsports 04-15-2016 09:24 AM
Quote:
Originally Posted by zer099 (Post 3459357)
I called JWT and asked about the timeline for stage 2 cams last week and they said (and this is paraphrasing): its set to be looked at later this year but is not something I would hold your breath for to be released within this year. In a nut shell they were very vague and noncommittal to a time-frame, and that's understandable. They said they haven't started development but have plans to do so this year. And that's all understandable as we all know how we get when we are told a date then it takes longer.

What I pulled from the phone call was "if your planing on pulling the engine this year and want cams the ones that are out are the ones you get. If your not committed and want to wait a year, give or take, we 'should' have a stage 2 by then."

Stage 2 is planed to be more aggressive and get the most they can get from the VHR. I asked if it was to be cut with more intention of being a FI cam or for NA and they said they wanted it to benefit both equally and not be bias more towards one than the other when it comes to it.

So... take from that what you will.


Do you know who you spoke with? As some of this info is not correct.


-Daelen

Elmo370z 04-15-2016 10:23 AM
Mmmmm darnit. Well ill i don't mind the wait, as my build will occur at some point in time next year. If they don't come out guess ill just go with the bp turbo kit

zer099 04-17-2016 03:51 AM
Quote:
Originally Posted by MAMotorsports (Post 3460109)
Do you know who you spoke with? As some of this info is not correct.


-Daelen
I don't recall the gentleman's name. A lady answered the phone, I asked to talk to someone about the VQ37VHR cams; I was put on hold and then a guy answered and we conversed for about 20 minutes about them.

Which info is incorrect?


All times are GMT -5. The time now is 08:48 AM.
Page 9 of 43 « First 78 9 101119 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2