Nissan 370Z Forum - Lower Intake Manifold Runner

Nissan 370Z Forum (http://www.the370z.com/)

- Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)

- - Lower Intake Manifold Runner (http://www.the370z.com/engine-drivetrain/107417-lower-intake-manifold-runner.html)

Dragon_Ball_Z

09-15-2015 12:59 AM

Lower Intake Manifold Runner

Can someone please help me on how to remove the lower intake manifold? I don't want to tackle the job and then screw up something. Can someone help if there is a DIY somewhere? I have looked and can't find one. Also with a ported and polished one, will an OEM gasket work? Any HELP is greatly appreciated

jchammond

09-15-2015 03:19 AM

3 Attachment(s)

Attachment 107764 Attachment 107765 Attachment 107766
If any studs come out they torque to 8ft lbs; also plenum gasket is re-usable if it doesn't tear.

Sent from my iPhone using Tapatalk

Elmo370z

09-15-2015 06:58 AM

Or just go buy a fsm

JARblue

09-15-2015 08:09 AM

Quote:

Originally Posted by Elmo370z (Post 3309334)

Or just go buy a fsm

Or download it. There are links on the forum. Find a SouthArk post; he links it in his signature.

Dragon_Ball_Z

09-15-2015 11:31 AM

Thanks guys!

-Raj

SouthArk370Z

09-15-2015 12:57 PM

Quote:

Originally Posted by JARblue (Post 3309391)

Or download it. There are links on the forum. Find a SouthArk post; he links it in his signature.

Here it is. :)

If you're going to be doing any mechanicing on a Z, you gotta have the FSM.

Dragon_Ball_Z

09-15-2015 12:58 PM

Thanks bro :)

-Raj

Elmo370z

09-15-2015 01:01 PM

Quote:

Originally Posted by JARblue (Post 3309391)

Or download it. There are links on the forum. Find a SouthArk post; he links it in his signature.

Will do thanks, iplan on dropping the sub frame to install the long tubes

Rusty

09-15-2015 08:19 PM

Quote:

Originally Posted by Elmo370z (Post 3309595)

Will do thanks, iplan on dropping the sub frame to install the long tubes

You don't have to drop the sub-frame to install the LTH's. The hardest part is getting the damn stock heat shield out on the left side once you unbolt it. This is where you tear up your hands. Your hands will look like they have been in a fight with a pissed off putty cat! :eek: If you're good with tools. The right side will only take you 45 minutes to do.

All times are GMT -5. The time now is 08:51 PM.