NST lightweight pulleys

Rusty

Your's is not the first that I know of. I'm going to make you worry now. Did it damage anything else? Wonder if it damage the crank? This is the reason I don't like these.

When mine broke on the LT1 cheby I had. It took out the crank and radiator too. The crank broke in front of #2 crank bearing. The pulley went through part of a 4 core radiator. It was explained to me by the guy who balanced and built my LT1. That when you change the dampener to a lightweight dampener. You change the harmonics in the crank. I had changed to the lightweight after I had installed the motor. So it was not balanced with everything else.

Here's some pic's I pulled.

Attached Images

	IMG_0810.JPG (43.0 KB, 52 views)
	shattered pulley.jpg (66.0 KB, 45 views)
	sheared_pulley.jpg (48.5 KB, 51 views)

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

Rangerz

Nope it didn't even hit the crankcase. I think it snap jumped up from tension or just rotated out and plopped onto the undertray. I thought it was track rubber coming off the tires...until I noticed my brake light, battery light, and no charge going into the batt. No PS is a bitch on 285 R1'S

__________________
Stillen Gen III/ NST/ Fast Intentions Non-Res HFC & 12" Resonated CF TDX/ Setreb series 9 OC/ SPL upper control arms/ Whiteline front & rear swaybars/ Uprev tuned by Seb@specialtyZ/ 319HP 262TQ/ Z1 PS Cooler/ Z1 SS Premium break lines/ CJM Road Race pump/Carbotech F:XP10 R:XP8 Nismo OC DIY

Rusty

I'm hoping you got lucky. i can just imagine going from ps to no ps and going in your mind, WTF???

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html