Originally Posted by BossJ New poster here. I usually just lurk, but I just had this happen to me the other day. On the interstate, only had the car (2013
|
|
LinkBack | Thread Tools | Display Modes |
12-27-2015, 07:34 PM | #61 (permalink) | |
Enthusiast Member
Join Date: Apr 2015
Location: Houston, Texas
Posts: 425
Drives: 13 Z34 PW M6
Rep Power: 243 |
Quote:
As for the brake sensor - I don't know about that...if you're driving and you lightly tap on the brake and the accelerator, you will know instantly that you can't accelerate. It wasn't that type of feeling but rather the car accelerated rather slowly. I took apart the intake and cleaned out the Throttle body (which wasn't all that dirty) and also cleaned the MAF sensors. I didn't have time to take off the bumper and look at the intake filter but i'll let you guys know if cleaning the TBs/MAF helped.
__________________
'13 PW M6 | Takeda | ARK GRiP V2 | H&R |
|
12-27-2015, 07:37 PM | #62 (permalink) | |
Base Member
Join Date: Oct 2015
Location: Florida
Posts: 116
Drives: 16 370z Nismo 6MT
Rep Power: 10 |
Quote:
If it happens again, I'll report back here. Sent from my Nexus 6P using Tapatalk
__________________
2016 Pearl White 370Z Nismo (6ma) || Z1 CAI || Greddy GT X || FI Resonated Test Pipes || Ported Manifolds || Fuel Pump: aem50-1200 || 1050cc Fuel Injectors || E85 || RJM Performance Clutch || ECUTECH - SpecialtyZ (Seb) |
|
12-27-2015, 10:03 PM | #64 (permalink) |
Base Member
Join Date: Oct 2015
Location: Florida
Posts: 116
Drives: 16 370z Nismo 6MT
Rep Power: 10 |
Yup. Thought the dealership guy was pulling my leg, but it worked last night. They said the sensor just reads it wrong and that's what gives the acceleration loss, but we'll see next time.
Sent from my Nexus 6P using Tapatalk
__________________
2016 Pearl White 370Z Nismo (6ma) || Z1 CAI || Greddy GT X || FI Resonated Test Pipes || Ported Manifolds || Fuel Pump: aem50-1200 || 1050cc Fuel Injectors || E85 || RJM Performance Clutch || ECUTECH - SpecialtyZ (Seb) |
12-27-2015, 10:13 PM | #65 (permalink) |
Enthusiast Member
Join Date: Apr 2015
Location: Houston, Texas
Posts: 425
Drives: 13 Z34 PW M6
Rep Power: 243 |
I'll have to try this in the event it happens to me again. But you know my car felt/sounded different after this event. I reset the battery and the exhausts opened up again.
__________________
'13 PW M6 | Takeda | ARK GRiP V2 | H&R |
12-30-2015, 12:15 PM | #66 (permalink) |
Enthusiast Member
Join Date: Aug 2010
Location: Texas
Posts: 284
Drives: 13 Nismo
Rep Power: 3370 |
3 types of limp mode happened to me.
causes were: 1) when I bought it brand new and drove home, engine was breaking in 2) brake light switch was constantly turned on (overrides gas pedal)when it was making contact with the brake pedal constantly 3) low engine oil |
12-30-2015, 12:16 PM | #67 (permalink) | |
Base Member
Join Date: Oct 2015
Location: Florida
Posts: 116
Drives: 16 370z Nismo 6MT
Rep Power: 10 |
Quote:
Sent from my Nexus 6P using Tapatalk
__________________
2016 Pearl White 370Z Nismo (6ma) || Z1 CAI || Greddy GT X || FI Resonated Test Pipes || Ported Manifolds || Fuel Pump: aem50-1200 || 1050cc Fuel Injectors || E85 || RJM Performance Clutch || ECUTECH - SpecialtyZ (Seb) |
|
12-30-2015, 12:19 PM | #68 (permalink) |
Enthusiast Member
Join Date: Aug 2010
Location: Texas
Posts: 284
Drives: 13 Nismo
Rep Power: 3370 |
yep I was freakin puzzled when this happened after a shady shop did a brake fluid flush. he was pretty violent with the brake pedal and that might have shifted the pedal position to hit the switch
edit: you can adjust the position of the switch to sit lower |
01-06-2016, 10:33 AM | #69 (permalink) |
Base Member
Join Date: Oct 2013
Location: south of korea
Posts: 5
Drives: g37s
Rep Power: 12 |
There are also problems, such as 09 g37.
can not climb above 3500 rpm. When you press the accelerator happen engine strident. The problem disappears when you restart the engine. Weather: Below 0 degrees Fog or high humidity Because of the maf sensor or Throttle Body supercooling ????? |
01-06-2016, 09:10 PM | #70 (permalink) |
Track Member
Join Date: Mar 2014
Location: NJ
Age: 64
Posts: 990
Drives: 2014 370Z PW Nismo
Rep Power: 2684366 |
Yep... this happened to me today. 2014 Nismo, 18k miles, CAI Gen 3, FI test pipe and CBE w/ uprev tune done about a year ago. Car never tracked or driven to it's limits.
Car is kept in heated garage year round and went to work this morning over in PA at 13 degrees, no issues. Left work around 3pm and 5 minutes into ride I get no throttle response. Takes long time to get up to speed...but I'm not limited to the 3500 rpms. Get home, have a beer, read this thread, finish beer, take car out for a spin and just like most people here it's back to normal. LOL. Will post back to thread if it happens again and what additional actions were taken.
__________________
FI TT Kit #099 making 794whp/713# torque@23psi |
09-24-2016, 10:58 PM | #71 (permalink) |
Base Member
Join Date: Jun 2016
Location: Sydney, Australia
Posts: 12
Drives: 2010-370z-white-a7
Rep Power: 9 |
Has happened to me twice in my 2009 Stillen SC 370z a7
Happened to me this morning, was driving very normally. I had the music playing so I could not hear much of the engine, started feeling the engine cutting out and bogging every time I tried to get over 2500 RPM, regardless of which gear I was in. Drove home slowly, turned of off and restarted it a few hours later, no problems since restarting. Not sure what the cause could be but some things: - the car was fairly low on fuel, a few minutes of driving after the restart my fuel range indicator came on. - the car was recently washed. With my Stillen SC setup the pods sit just behind the front bumper exposed. Very likely they were soaked a bit during the hose washing. - the music was running and I was playing around with the audio settings at the time it happened. (Bose system) |
09-24-2016, 11:11 PM | #72 (permalink) |
Track Member
Join Date: Apr 2012
Location: earth
Posts: 770
Drives: car
Rep Power: 2067 |
Still no ideal?!? Mine never happened again knock on wood. Crazy. Can't wait to find out what it is. Next yr is the new Z fingers crossed (never ever buy 1st yr productions)
Sent from my iPhone using Tapatalk |
02-01-2017, 08:16 AM | #73 (permalink) | |
Enthusiast Member
Join Date: Aug 2010
Location: Texas
Posts: 284
Drives: 13 Nismo
Rep Power: 3370 |
I need to add#4 to limp mode.
4) MAF code P0101, P101B possibly related to K&N filters oversaturating the MAFs and damaging them.. I've changed back to dry filter, changed MAFs twice, and still having this problem intermittently. went to different shops, nobody knows how to fix this. I am told that throttle bodies are probably not the culprit and waste of time cleaning. but there was a thread about people reporting the same issues and cleaning throttle bodies fixed their limp modes and codes related to the MAFS. Quote:
|
|
02-02-2017, 01:05 PM | #74 (permalink) |
Base Member
Join Date: Dec 2015
Location: Los Angeles
Posts: 93
Drives: 14 370z Nismo MB M6
Rep Power: 10 |
This just happened to me yesterday afternoon.
I had stalled while exiting a parking garage, foot slipped off the clutch. While driving on the street, I was trying to get into the left lane, and it was slow to accelerate. I tried to downshift from 4th to 3rd and the RPM's were high, but the car was taking forever to accelerate to a higher speed. It was like shifting from 2nd to 5th sluggish. Took it to the dealer to have a technician drive with me. After car had been turned off for 10 minutes. Took the technician for a test drive and bam, it's back to normal. Technician said to just have them check for any error codes and none found. Car is running back to normal, but going to keep monitoring it. Luckily I found this thread too. I couldn't find anything with my search queries.
__________________
2014 Nismo #0614 Magnetic Black (stock for now...) |
03-16-2017, 12:56 PM | #75 (permalink) |
Enthusiast Member
Join Date: May 2013
Location: florida
Posts: 361
Drives: nikes
Rep Power: 14 |
mines doing this now too. 2013 with CAI G3 and FI CBE. it was doing it in the morning when i leave for work, then it quit for a few weeks. now its doing it when i leave work.
i just got a p0101 code today. im not sure how i should approach this. any advice? |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
limp mode for no reason at all? | Gestalt73 | Nissan 370Z General Discussions | 25 | 10-20-2018 01:34 AM |
limp mode even with oil cooler! | boosted180 | Track / Autocross / Drifting / Dragstrip | 7 | 09-20-2009 03:58 PM |
Possible limp mode? | DinoJ | Nissan 370Z General Discussions | 21 | 09-04-2009 05:17 PM |
limp mode temp. | boosted180 | Track / Autocross / Drifting / Dragstrip | 14 | 07-29-2009 01:56 AM |
Limp Mode Thresholds | spearfish25 | Nissan 370Z General Discussions | 8 | 05-09-2009 12:54 PM |