06-15-2015, 12:19 AM
|
#8 (permalink)
|
|
A True Z Fanatic
Join Date: Sep 2010
Location: Albuquerque, NM
Posts: 2,045
Drives: 09 370Z Touring/Sprt
Rep Power: 10091
|
Quote:
Originally Posted by pbs370z
Just listened again. I got it backwards - not the throwout bearing (sorry bout that). It whines the 1st 2 revs (clutch out, transmission spinning), quieter with the pedal pressed (trans. not turning). That indicates something in the trans. (bearing or gear?) when the input shaft is spinning.
Also, the pilot bearing and tranny shaft would not be spinning relative to each other with the clutch pedal released (up, not pressed) so I would say the pilot bearing would not be the cause. These are usually just a bronze sleeve anyway (no noise).
|
So what do you think? Maybe the output shaft bearing, i know i had to replace the rear tranny seal as it had been leaking for what looks like quite a while based on the amount of fluid that came out of the tranny when i drained it (about a quart and a half came out) so maybe the output shaft bearing wasnt being properly lubricated leading it to start wearing down? Just trying to get a list of things together for the mechanic to take a look at.
|
|
|
Similar Threads
5Likes
Threaded Mode
