Nissan 370Z Forum  

Having to replace clutch with only 17500 miles :/

Hello, I wanted to ask the forum about my clutch issue. I have a 2014 Nismo with 17500 miles on her. I noticed my clutch was slipping . Took the

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Engine & Drivetrain


Like Tree13Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 05-26-2015, 10:55 PM   #1 (permalink)
Base Member
 
milko002's Avatar
 
Join Date: May 2014
Location: Montgomery, IL
Posts: 65
Drives: 2014 370Z Nismo
Rep Power: 11
milko002 is on a distinguished road
Default Having to replace clutch with only 17500 miles :/

Hello,
I wanted to ask the forum about my clutch issue. I have a 2014 Nismo with 17500 miles on her. I noticed my clutch was slipping . Took the Z to dealer and was told the clutch was worn and needed to be replaced. I don't ride the Z hard and I don't ride the clutch. For the clutch to need to be replaced seems odd to me. They quoted me 1952.00 to replace the clutch or 3000.00 if I also needed a new fly wheel . If I put the Z in 3rd and let go of the clutch it stalls . I don't think the clutch could be that bad that it needs all this work . Looking for your guys opinion.

Thanks
milko002 is offline   Reply With Quote
Old 05-26-2015, 11:22 PM   #2 (permalink)
Enthusiast Member
 
need4speed255's Avatar
 
Join Date: Oct 2014
Location: Indiana
Posts: 262
Drives: 15Nsmo/99 EclipseGST
Rep Power: 11
need4speed255 is on a distinguished road
Default

It's hard to believe that you need a new clutch at such low mileage and how you say it has been driven. If you put the trans in a high gear such as 4th, 5th, or 6th, and floor it, does the engine rev faster than the car accelerates? That would be a slipping clutch and a sign that it is time to replace. Another problem could be oil on the clutch disc from a leaky slave cylinder. How does the bell housing look? Any oil leaking in there?
need4speed255 is offline   Reply With Quote
Old 05-27-2015, 12:33 AM   #3 (permalink)
Base Member
 
milko002's Avatar
 
Join Date: May 2014
Location: Montgomery, IL
Posts: 65
Drives: 2014 370Z Nismo
Rep Power: 11
milko002 is on a distinguished road
Default

Quote:
Originally Posted by need4speed255 View Post
It's hard to believe that you need a new clutch at such low mileage and how you say it has been driven. If you put the trans in a high gear such as 4th, 5th, or 6th, and floor it, does the engine rev faster than the car accelerates? That would be a slipping clutch and a sign that it is time to replace. Another problem could be oil on the clutch disc from a leaky slave cylinder. How does the bell housing look? Any oil leaking in there?
If I floor it in 4th gear the car takes off with no problem. It only seems like it happens in 1st and 2nd gear. I did not see any leaks and the fluids are full. I think the dealer is trying to rip me off. All service tech did was take the car for a drive and said the clutch was bad when he came back.
milko002 is offline   Reply With Quote
Old 05-27-2015, 01:00 AM   #4 (permalink)
A True Z Fanatic
 
Join Date: Jun 2014
Location: Ga
Posts: 13,798
Drives: 2013 Nismo 370z
Rep Power: 2684392
Spooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond repute
Default

That doesn't sound right. First and second will mostly be fine. If a clutch is slipping it will be in the high gears first. Floor it in 5th and 6th. If it revs up and does not gain speed, then your clutch it toast. If not, then it is OK.
Spooler is offline   Reply With Quote
Old 05-27-2015, 10:31 AM   #5 (permalink)
Base Member
 
RayMaN's Avatar
 
Join Date: Apr 2014
Location: Florida
Posts: 128
Drives: 09 Nissan 370Z BK M6
Rep Power: 11
RayMaN is on a distinguished road
Default

Quote:
Originally Posted by milko002 View Post
If I floor it in 4th gear the car takes off with no problem. It only seems like it happens in 1st and 2nd gear. I did not see any leaks and the fluids are full. I think the dealer is trying to rip me off. All service tech did was take the car for a drive and said the clutch was bad when he came back.
Can you describe what it does that makes you think it's the clutch?
RayMaN is offline   Reply With Quote
Old 05-27-2015, 10:58 AM   #6 (permalink)
A True Z Fanatic
 
TerribleONE's Avatar
 
Join Date: Jan 2009
Location: Socal
Posts: 10,203
Drives: WOT
Rep Power: 5850
TerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond repute
Default

Sounds fishy. Did they visually inspect the clutch?
__________________
638WHP 541WTQ @ 13.5PSI
Build thread
TerribleONE is offline   Reply With Quote
Old 05-27-2015, 11:02 AM   #7 (permalink)
Track Member
 
BC416's Avatar
 
Join Date: Jun 2014
Location: NJ
Age: 37
Posts: 718
Drives: 2012 KAD 6MT
Rep Power: 592
BC416 has a reputation beyond reputeBC416 has a reputation beyond reputeBC416 has a reputation beyond reputeBC416 has a reputation beyond reputeBC416 has a reputation beyond reputeBC416 has a reputation beyond reputeBC416 has a reputation beyond reputeBC416 has a reputation beyond reputeBC416 has a reputation beyond reputeBC416 has a reputation beyond reputeBC416 has a reputation beyond repute
Default

Quote:
Originally Posted by milko002 View Post
Hello,
I wanted to ask the forum about my clutch issue. I have a 2014 Nismo with 17500 miles on her. I noticed my clutch was slipping . Took the Z to dealer and was told the clutch was worn and needed to be replaced. I don't ride the Z hard and I don't ride the clutch. For the clutch to need to be replaced seems odd to me. They quoted me 1952.00 to replace the clutch or 3000.00 if I also needed a new fly wheel . If I put the Z in 3rd and let go of the clutch it stalls . I don't think the clutch could be that bad that it needs all this work . Looking for your guys opinion.

Thanks
Curious how you came to this conclusion? That is way too early for a clutch to be needing replacing. Like others have stated, slipping usually starts off happening in the higher gears. So if you floor it at a low RPM in 5th or 6th, the revs should go up but the car shouldn't really accelerate.

I'd get a 2nd opinion before you shell out $3k to replace something.
milko002 likes this.
__________________
F.I. / K&N / 180 / Forgestar
BC416 is offline   Reply With Quote
Old 05-27-2015, 11:12 AM   #8 (permalink)
A True Z Fanatic
 
jwick's Avatar
 
Join Date: Dec 2010
Location: Houston
Posts: 14,532
Drives: '10 G37 6MT
Rep Power: 2465056
jwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond repute
Default

Quote:
Originally Posted by BC416 View Post
Curious how you came to this conclusion? That is way too early for a clutch to be needing replacing. Like others have stated, slipping usually starts off happening in the higher gears. So if you floor it at a low RPM in 5th or 6th, the revs should go up but the car shouldn't really accelerate.

I'd get a 2nd opinion before you shell out $3k to replace something.


I'd also seriously consider an aftermarket clutch/flywheel/HD CSC if you end up replacing the clutch. You can get that for $1,000-1,200 and labor on a clutch shouldn't be more than 5-6hrs of shop labor. You can save at least a grand and maybe even get it for half of what the dealer is quoting you.
eastwest2300 and milko002 like this.
__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build

jwick is offline   Reply With Quote
Old 05-27-2015, 12:18 PM   #9 (permalink)
A True Z Fanatic
 
eastwest2300's Avatar
 
Join Date: May 2010
Location: South FL
Posts: 90,972
Drives: '16QX70/'21 Supra3.0
Rep Power: 2684550
eastwest2300 has a reputation beyond reputeeastwest2300 has a reputation beyond reputeeastwest2300 has a reputation beyond reputeeastwest2300 has a reputation beyond reputeeastwest2300 has a reputation beyond reputeeastwest2300 has a reputation beyond reputeeastwest2300 has a reputation beyond reputeeastwest2300 has a reputation beyond reputeeastwest2300 has a reputation beyond reputeeastwest2300 has a reputation beyond reputeeastwest2300 has a reputation beyond repute
Default

Yup, thats what Im doing, and I only have 7800 miles on a 2010.
__________________
Infiniti QX70 & Toyota Supra 3.0 Premium
eastwest2300 is offline   Reply With Quote
Old 05-27-2015, 01:38 PM   #10 (permalink)
Base Member
 
milko002's Avatar
 
Join Date: May 2014
Location: Montgomery, IL
Posts: 65
Drives: 2014 370Z Nismo
Rep Power: 11
milko002 is on a distinguished road
Default

Quote:
Originally Posted by TerribleONE View Post
Sounds fishy. Did they visually inspect the clutch?
They did not take apart the clutch. They took it for a ride and came back and told me the same thing I told them. The clutch is slipping .

Just got off the phone with Nissan USA and they told me that the clutch was NOT covered under warranty at any mileage and they are sorry that my car needs a new one. I will spend the 2000.00 and get me a non OEM clutch and be done with it . Just wanted to share my story. Hope no one has to have this happen to them .

Im trying to look at this as a postive. Now I can get a real nice clutch and the wife wont get mad for me modding the Z .
The stock ones are a POS anyways.

Have a appointment at TF Works in Chicago to have the new one put in. Might sneak in a ARK Grip exhaust. The little lady will never know

PS: The 20000 mile service cost me 410.00 at the dealer. NEVER AGAIN !
eastwest2300 likes this.
milko002 is offline   Reply With Quote
Old 05-27-2015, 01:41 PM   #11 (permalink)
Base Member
 
milko002's Avatar
 
Join Date: May 2014
Location: Montgomery, IL
Posts: 65
Drives: 2014 370Z Nismo
Rep Power: 11
milko002 is on a distinguished road
Default

Quote:
Originally Posted by BC416 View Post
Curious how you came to this conclusion? That is way too early for a clutch to be needing replacing. Like others have stated, slipping usually starts off happening in the higher gears. So if you floor it at a low RPM in 5th or 6th, the revs should go up but the car shouldn't really accelerate.

I'd get a 2nd opinion before you shell out $3k to replace something.
TF Works quoted me 1500.00 out the door for a clutch kit . This is the last time the dealer sees this car.
milko002 is offline   Reply With Quote
Old 05-27-2015, 01:45 PM   #12 (permalink)
A True Z Fanatic
 
jwick's Avatar
 
Join Date: Dec 2010
Location: Houston
Posts: 14,532
Drives: '10 G37 6MT
Rep Power: 2465056
jwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond reputejwick has a reputation beyond repute
Default

Quote:
Originally Posted by milko002 View Post
TF Works quoted me 1500.00 out the door for a clutch kit . This is the last time the dealer sees this car.
Make sure that price includes either the ZSpeed HD CSC or Z1 CSC Elimination kit or you'll be dropping that tranny again when the CSC goes out. Three hundred extra bucks and you'll never have the CSC issue again
eastwest2300 and JARblue like this.
__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build

jwick is offline   Reply With Quote
Old 05-27-2015, 02:06 PM   #13 (permalink)
Base Member
 
Join Date: Oct 2013
Location: Fort Dix, NJ
Posts: 167
Drives: 2010 370Z
Rep Power: 12
zae757 is on a distinguished road
Default

The only thing I take my car to the shop for is an oil change (just to have a running record of it in case I decide to sell)...everything else I do myself or take it to shops that aren't dealers
zae757 is offline   Reply With Quote
Old 05-27-2015, 02:12 PM   #14 (permalink)
A True Z Fanatic
 
JARblue's Avatar
 
Join Date: Mar 2011
Location: Austin, TX
Age: 43
Posts: 36,450
Drives: 11 Z34, 98 E36 M3
Rep Power: 2684440
JARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond repute
Default

Quote:
Originally Posted by jwick View Post
Make sure that price includes either the ZSpeed HD CSC or Z1 CSC Elimination kit or you'll be dropping that tranny again when the CSC goes out. Three hundred extra bucks and you'll never have the CSC issue again
__________________

2011 370Z 6MT Sport Gun Metallic | ARC | CJM | Ecutek | FI | Fujimura | R2C | SPL | Stillen | TWM | Z1 | ZSpeed |
JARblue is offline   Reply With Quote
Old 05-27-2015, 02:27 PM   #15 (permalink)
Base Member
 
milko002's Avatar
 
Join Date: May 2014
Location: Montgomery, IL
Posts: 65
Drives: 2014 370Z Nismo
Rep Power: 11
milko002 is on a distinguished road
Default

Quote:
Originally Posted by jwick View Post
Make sure that price includes either the ZSpeed HD CSC or Z1 CSC Elimination kit or you'll be dropping that tranny again when the CSC goes out. Three hundred extra bucks and you'll never have the CSC issue again
Thanks ! I have them do the Z1 elimination kit also .

This is my drift car 50000 mile OEM clutch.
Attached Images
File Type: jpg milkos.jpg (77.5 KB, 25 views)
File Type: jpg 20140411_140613-597x336.jpg (67.3 KB, 20 views)
File Type: jpg 20140411_140535-597x336.jpg (80.3 KB, 18 views)

Last edited by milko002; 05-27-2015 at 02:44 PM.
milko002 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Replace drive belts at 30k miles? crazyyankfan Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs 20 09-23-2017 11:11 AM
Do i need to replace the clutch when a CSC brakes? luigi90210 Engine & Drivetrain 12 02-11-2014 11:21 PM
Should I replace my clutch with throw bearing? shoeless89 Engine & Drivetrain 13 11-29-2013 07:15 PM
Time to Replace the clutch? kevin.z Engine & Drivetrain 24 04-18-2010 06:36 PM


All times are GMT -5. The time now is 10:49 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2