CJM Oil Pan

Spooler · 10-06-2015, 12:43 AM

Fired her up tonight for the first time. No issues. No drips, no runs, no errors. This is a Johnny bench commercial. Off to work in the morning in her. I had to drive my truck today.

synolimit · 10-06-2015, 12:53 AM

Quote:

Originally Posted by phunk

Ouch, that is an oversight on my part. Those mounting points on my car were cut off and filed flush going back 5+ years ago (Greddy oil pan or spacers require it also). I entirely forgot they were there or I would have made mention of this to save you from finding out the hard way and having to back track. My sincere apologies on this, that's a little embarrassing to have missed.

This undertray will still be functional without that bolt, I always ran it even though I had to remove the tab on both sides.

****!! My front splitter frame attaches to these!

Rusty · 10-06-2015, 01:23 AM

Quote:

Originally Posted by synolimit

****!! My front splitter frame attaches to these!

You can bend the tab some to get a socket on the bolt. Then bend it back.

andy_meng1024 · 10-06-2015, 02:29 AM

Another one on a twin supercharged G37 Sedan

iPhone

phunk · 10-06-2015, 11:36 AM

Quote:

Originally Posted by synolimit

****!! My front splitter frame attaches to these!

Just the one has to be modified, the other side remains in place

KngScottieV · 10-22-2015, 08:56 PM

Just got back from my buddies shop and got it installed. Fitment was perfect and we ground down the tab a bit, like in Andy_meng1024's picture. My buddy loved the way the oil pan looked and felt, he's installed a couple of the spacers for a couple other 370Z owners and he was impressed with the overall quality.

Looking forward to the next thing you make phunk.

phunk · 10-23-2015, 09:52 PM

If anyone was wanting one of these, they are currently in stock in black anodized or raw aluminum. Blue will be back in stock sometime in the next 3-4 weeks.

Quote:

Originally Posted by KngScottieV

Just got back from my buddies shop and got it installed. Fitment was perfect and we ground down the tab a bit, like in Andy_meng1024's picture. My buddy loved the way the oil pan looked and felt, he's installed a couple of the spacers for a couple other 370Z owners and he was impressed with the overall quality.

Looking forward to the next thing you make phunk.

Thank you for the feedback, it is appreciated!

Spooler · 01-02-2016, 11:43 PM

I just did my first oil change with the new pan. It takes right at 6 qts.

scope22 · 01-17-2016, 12:39 PM

i need one in black, what fittings do i need for a supercharged 2010? the site lists 2 male or 1 plug and 1 male...not sure what to get.

Quote:

Originally Posted by phunk

If anyone was wanting one of these, they are currently in stock in black anodized or raw aluminum. Blue will be back in stock sometime in the next 3-4 weeks.

Thank you for the feedback, it is appreciated!

Spooler · 01-17-2016, 01:18 PM

Quote:

Originally Posted by scope22

i need one in black, what fittings do i need for a supercharged 2010? the site lists 2 male or 1 plug and 1 male...not sure what to get.

Call him up tomorrow.

jwick · 01-17-2016, 01:22 PM

Quote:

Originally Posted by scope22

i need one in black, what fittings do i need for a supercharged 2010? the site lists 2 male or 1 plug and 1 male...not sure what to get.

Questions:

- What SC?
- What Oil Pan do you currently have?
- Does your pan have any taps in it now?
- Do you have any need/want to add a oil temp sensor?

jwick · 01-17-2016, 01:23 PM

Quote:

Originally Posted by Spooler

Call him up tomorrow.

Or this. Phunk is super knowledgeable and can get you sorted.

scope22 · 01-18-2016, 12:07 PM

Quote:

Originally Posted by jwick

Questions:

- What SC?
- What Oil Pan do you currently have?
- Does your pan have any taps in it now?
- Do you have any need/want to add a oil temp sensor?

gtm 1.5
Oem I guess
Don't know
If you're saying that I'll lose oem temp sensor then yea it's a must

jwick · 01-18-2016, 12:44 PM

Quote:

Originally Posted by scope22

gtm 1.5

Oem I guess

Don't know

If you're saying that I'll lose oem temp sensor then yea it's a must

If you have an OEM unmodified pan then you wouldn't be losing anything. If you wanted an aftermarket oil temp gauge then you would want one port to be tapped for your temperature sender (most likely 1/8"NPT).

phunk · 01-18-2016, 02:36 PM

I have not installed the GTM SC system, but from what I understand, the Rotrex SC uses its own oil in a sealed system, and does not use the engine oil.

If that is the case, no special accommodations would need to be made, and to just select the plugs for the oil pan would be the way to go.

10-06-2015, 12:43 AM	#481 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,801 Drives: 2013 Nismo 370z Rep Power: 2684392	Fired her up tonight for the first time. No issues. No drips, no runs, no errors. This is a Johnny bench commercial. Off to work in the morning in her. I had to drive my truck today. phunk likes this.

10-06-2015, 02:29 AM	#484 (permalink)
andy_meng1024 Premium Member Join Date: Nov 2009 Location: Taipei Posts: 233 Drives: 2012 370z Rep Power: 3382	Another one on a twin supercharged G37 Sedan iPhone phunk, Zauskycop, GaleForce and 1 others like this. __________________ Current: 2015 C200 / 2018 Cayenne / 2012 370z / 2012 C250 Coupe Gone: 2013 Cayenne / 2004 Cayenne S / 2003 SL55 AMG / 2008 C300 / 2006 350z / 2006 C280 4Matic

10-22-2015, 08:56 PM	#486 (permalink)
KngScottieV Base Member Join Date: Dec 2012 Location: Utah Age: 40 Posts: 155 Drives: 13 370z MagmaRed M6S Rep Power: 22	Just got back from my buddies shop and got it installed. Fitment was perfect and we ground down the tab a bit, like in Andy_meng1024's picture. My buddy loved the way the oil pan looked and felt, he's installed a couple of the spacers for a couple other 370Z owners and he was impressed with the overall quality. Looking forward to the next thing you make phunk. phunk likes this. __________________ 2013 Nissan 370z Magma Red Base w/Sport package 6speed. AAM intakes (S-line for now, still needs tuned), Berk HFC's, ARK DT-S cat-back, CJM baffled oil pan, and FI 34 row oil cooler.

01-02-2016, 11:43 PM	#488 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,801 Drives: 2013 Nismo 370z Rep Power: 2684392	I just did my first oil change with the new pan. It takes right at 6 qts. phunk, GaleForce and VQZ34nismo like this.

01-18-2016, 02:36 PM	#495 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	I have not installed the GTM SC system, but from what I understand, the Rotrex SC uses its own oil in a sealed system, and does not use the engine oil. If that is the case, no special accommodations would need to be made, and to just select the plugs for the oil pan would be the way to go. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph