CJM Oil Pan

jrb55gh · 06-03-2015, 08:33 AM

I would like to buy one of your pans for my Z,

I like your suggestion of a top baffle that that has a .75” lip at 90 degrees up to aid in lateral control without hindering oil return from the back of the pan.

However, I am concerned that there needs to be more baffling to reduce oil splashing up away from the pickup when the car is pitching on uneven roads. I would like to see a top baffle that also includes a down pointing 0.5” lip inside the chamber around the pickup to trap oil if it tries to splash upward. I don’t think this would hinder oil from reaching the pickup from the back of the pan or from the sides through the trap doors.

Will you make this baffle design available on this initial production run?

06-03-2015, 08:33 AM	#11 (permalink)
jrb55gh Base Member Join Date: Mar 2013 Location: DFW Texas Posts: 149 Drives: '13 370z black 7AT Rep Power: 13	Verticle spash control I would like to buy one of your pans for my Z, I like your suggestion of a top baffle that that has a .75” lip at 90 degrees up to aid in lateral control without hindering oil return from the back of the pan. However, I am concerned that there needs to be more baffling to reduce oil splashing up away from the pickup when the car is pitching on uneven roads. I would like to see a top baffle that also includes a down pointing 0.5” lip inside the chamber around the pickup to trap oil if it tries to splash upward. I don’t think this would hinder oil from reaching the pickup from the back of the pan or from the sides through the trap doors. Will you make this baffle design available on this initial production run?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode