Help! Really unusual engine or ecu problem.

IAmTheStig · 04-18-2015, 07:32 PM

Check the brake pedal switches. If they are out of adjustment the ecu will think you're pushing the brake and the gas at the same time and override the accelerator input.

smoothtransit · 04-21-2015, 07:59 PM

Quote:

Originally Posted by SouthArk370Z

I'd get an OBD/CAN scanner tool and take a look at any error codes that may show up. Not all errors throw a CEL.

A possibility that is easy to fix is dirty MAFs. Four small screws and a can of MAF cleaner. There are several DIYs on this site.

I actually have one so i will go check it out tonight. I wasnt aware that notifications would be given without CEL, good to know.

smoothtransit · 04-21-2015, 08:00 PM

Quote:

Originally Posted by IAmTheStig

Check the brake pedal switches. If they are out of adjustment the ecu will think you're pushing the brake and the gas at the same time and override the accelerator input.

Im sorry, I dont know how to do this. What do you mean by checking the switches?

IAmTheStig · 04-21-2015, 10:24 PM

Quote:

Originally Posted by smoothtransit

Im sorry, I dont know how to do this. What do you mean by checking the switches?

At the brake pedal under the dash there are switches that are activated when the brake pedal gets pressed. If the lame brackets they are mounted to get bent or are out of adjustment, they could activate when the brake pedal is barely depressed or not depressed at all, causing the ecu to think you are pressing the brake and the gas at the same time, and when this happens, the ecu will always cut engine torque to allow for the braking.

smoothtransit · 04-22-2015, 11:36 AM

Quote:

Originally Posted by IAmTheStig

At the brake pedal under the dash there are switches that are activated when the brake pedal gets pressed. If the lame brackets they are mounted to get bent or are out of adjustment, they could activate when the brake pedal is barely depressed or not depressed at all, causing the ecu to think you are pressing the brake and the gas at the same time, and when this happens, the ecu will always cut engine torque to allow for the braking.

Okay I see, thank you for the explanation. I will go and inspect it to see if that could be the root of the problem.

smoothtransit · 04-24-2015, 02:06 PM

So I inspected the brake pedal and its sensors, everything seemed normal. I also scanned via obd2 and no codes were thrown. Im not really sure what else to do other than remove the TB's and check out the MAF sensors.

IAmTheStig · 04-24-2015, 05:09 PM

Quote:

Originally Posted by smoothtransit

So I inspected the brake pedal and its sensors, everything seemed normal. I also scanned via obd2 and no codes were thrown. Im not really sure what else to do other than remove the TB's and check out the MAF sensors.

Well at least its one thing less that could be a problem.

Carbon_z · 04-29-2015, 12:30 PM

i had a similar issue. When you say power, you mean absolutely no lights or power are coming on at all? or does it come on but wont crank? If power isn't consistent check the terminals of battery and do battery test.

If the power is coming on but it wont turn over some times you have have an issue with VVEL sensor or Module. The check engine light may not be on because the ecu is being drained of the power if it is the first issue I mentioned about battery, however, you can pull up the codes (pending & history) to see if there were any codes.. Do not clear until you fix the issue.

04-24-2015, 02:06 PM	#21 (permalink)
smoothtransit Base Member Join Date: Dec 2014 Location: Seattle Posts: 63 Drives: 09 370 BS 6mt Rep Power: 10	So I inspected the brake pedal and its sensors, everything seemed normal. I also scanned via obd2 and no codes were thrown. Im not really sure what else to do other than remove the TB's and check out the MAF sensors. carlitos_370z likes this.

04-29-2015, 12:30 PM	#23 (permalink)
Carbon_z A True Z Fanatic Join Date: Sep 2009 Location: Atlanta, GA Posts: 1,694 Drives: Carbon Fiber 370z Rep Power: 19	i had a similar issue. When you say power, you mean absolutely no lights or power are coming on at all? or does it come on but wont crank? If power isn't consistent check the terminals of battery and do battery test. If the power is coming on but it wont turn over some times you have have an issue with VVEL sensor or Module. The check engine light may not be on because the ecu is being drained of the power if it is the first issue I mentioned about battery, however, you can pull up the codes (pending & history) to see if there were any codes.. Do not clear until you fix the issue. carlitos_370z likes this. __________________ Full Carbon Fiber Nissan 370z "400zTT" Fully Built 4.0L Twin Turbo 1300hp, 1100whp. Follow me on Instagram at http://www.instagram.com/carbonz. Last edited by Carbon_z; 04-29-2015 at 02:28 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I have a serious engine problem	Mike	Engine & Drivetrain	56	02-19-2020 10:24 PM
Engine Problem?	SoCalBoy	Engine & Drivetrain	17	12-31-2012 02:22 AM
engine problem	Xsad	Engine & Drivetrain	2	01-30-2012 10:40 AM
Unusual problem with Bose system	msb3079	Audio & Video	13	11-15-2010 10:51 PM
Help me! Engine oil problem!!	leepeen	Nissan 370Z General Discussions	72	07-03-2009 10:17 AM

04-18-2015, 07:32 PM	#16 (permalink)
IAmTheStig Base Member Join Date: Feb 2014 Location: Michigan Posts: 50 Drives: 2014 370z Coupe Rep Power: 11	Check the brake pedal switches. If they are out of adjustment the ecu will think you're pushing the brake and the gas at the same time and override the accelerator input.