Clutch Longevity (excl CSC/CMC)

nis350 · 04-09-2015, 02:43 PM

For those with higher mileage. How many miles does the OEM clutch last in term of the clutch disc and pressure plate etc. (excluding the csc/cmc) under normal driving condition? Thx.

theDreamer · 04-09-2015, 02:44 PM

Can easily last 100k miles under 'normal' driving conditions.
I put a new one in after 80k miles and boosted since 19k miles, it all comes down to how you drive and how much you ride the clutch.

DOOMMONKEY777 · 04-09-2015, 03:48 PM

Over 35k miles on the odometer, in nyc dd, traffic, red lights, stop sings and other unexpected stops....i clutched it over 150k times, changed fluid @24 and 26k miles. Still clutching strong.

P.S. i dont ride the clutch, just press and let go, the longest clutch riding i do is 1$t gear about 1sec.

jwick · 04-09-2015, 04:25 PM

Your clutch should last the life of the car if you drive it properly. This does assume you don't mod the car. I've never burnt out a clutch in my life and I've put hundreds of thousands of miles on manual transmissions.

VDC_OFF · 04-10-2015, 09:38 AM

ill probably need to replace my clutch soon. im at 35k :P

MagmaRed370z · 04-10-2015, 09:40 AM

On this same note, how much does it cost to replace a clutch?

jwick · 04-10-2015, 09:49 AM

Quote:

Originally Posted by schellingr

On this same note, how much does it cost to replace a clutch?

My aftermarket clutch, HD CSC and new CMC was $1100. Figure on 4-5 hrs of labor if you aren't going to do it yourself. Throw in $40 for misc fluid etc. So $1500-1700 depending on labor cost in your area.

Edit - of course costs could go up depending on clutch you choose

VDC_OFF · 04-10-2015, 10:23 AM

My clutch has been sticking to the floor at drift events. At first I found I had old black fluid so I swapped it out with Motul and it was back to clutch kicking. Now at my last event it started sticking again but this time almost immediately. Thing is it wasn't completely on the the floor, there was still a couple mm's of pressure to shift it in gear. Thought it was the CSC issue but there is no loss of fluid anywhere and after some time it goes back to normal. Someone who tracks it says I have to replace the CMC with a willwood and that would fix it. Anyone else have this problem, want to be sure before I order one.

jwick · 04-10-2015, 10:39 AM

The willwood won't fit. There is no aftermarket CMC for our cars. Really sounds like you have the first stages of CSC failure. Swap it out for the zspeed HD. While the tranny is on the ground you might consider swapping the clutch too. It is highly recommended you replace the CMC any time you drain it completely too.

nis350 · 04-10-2015, 04:35 PM

Glad to know that the clutch is fairly good.

So was it completely worn out at 80k miles or it was still good?

Quote:

Originally Posted by theDreamer

Can easily last 100k miles under 'normal' driving conditions.
I put a new one in after 80k miles and boosted since 19k miles, it all comes down to how you drive and how much you ride the clutch.

jwick · 04-10-2015, 05:49 PM

Quote:

Originally Posted by nis350

Glad to know that the clutch is fairly good.

So was it completely worn out at 80k miles or it was still good?

Pulled mine out at 42k to upgrade for the turbo install and the friction plate was still in perfect condition.

theDreamer · 04-13-2015, 09:33 AM

Mine was still in perfect condition like jwick (Friction plate), but my CSC died on me (pedal stuck to floor) so figured it was time to do it all at once.

Zero dark · 04-13-2015, 09:47 AM

Quote:

Originally Posted by theDreamer

Mine was still in perfect condition like jwick (Friction plate), but my CSC died on me (pedal stuck to floor) so figured it was time to do it all at once.

what miles did your csc fail?

jwick · 04-13-2015, 10:10 AM

Quote:

Originally Posted by theDreamer

Mine was still in perfect condition like jwick (Friction plate), but my CSC died on me (pedal stuck to floor) so figured it was time to do it all at once.

The stock clutch is pretty good. It's the CSC that's crap. But if you are dropping the tranny to replace the CSC anyway then what Dreamer did and go ahead and swap the clutch is a good idea.

theDreamer · 04-13-2015, 10:23 AM

Quote:

Originally Posted by Zero dark

what miles did your csc fail?

About 87,000 miles my CSC failed for the first time.

04-09-2015, 02:43 PM	#1 (permalink)
nis350 A True Z Fanatic Join Date: Oct 2014 Location: socal Posts: 1,112 Drives: 370z Rep Power: 13435	Clutch Longevity (excl CSC/CMC) For those with higher mileage. How many miles does the OEM clutch last in term of the clutch disc and pressure plate etc. (excluding the csc/cmc) under normal driving condition? Thx.

04-09-2015, 02:44 PM	#2 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4211	Can easily last 100k miles under 'normal' driving conditions. I put a new one in after 80k miles and boosted since 19k miles, it all comes down to how you drive and how much you ride the clutch. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

04-09-2015, 03:48 PM	#3 (permalink)
DOOMMONKEY777 A True Z Fanatic Join Date: Sep 2010 Location: Crooklyn Posts: 1,009 Drives: 370Z 6psd-sport-pkg Rep Power: 21	Over 35k miles on the odometer, in nyc dd, traffic, red lights, stop sings and other unexpected stops....i clutched it over 150k times, changed fluid @24 and 26k miles. Still clutching strong. P.S. i dont ride the clutch, just press and let go, the longest clutch riding i do is 1$t gear about 1sec. MagmaRed370z likes this. __________________ Kids don't do Drugs, Drugs are bad, so let the professional druggies do Drugs for you. 537whp/496lb/tq@8-9PSI 93 octane Last edited by DOOMMONKEY777; 04-09-2015 at 03:51 PM.

04-09-2015, 04:25 PM	#4 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	Your clutch should last the life of the car if you drive it properly. This does assume you don't mod the car. I've never burnt out a clutch in my life and I've put hundreds of thousands of miles on manual transmissions. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

04-10-2015, 09:38 AM	#5 (permalink)
VDC_OFF A True Z Fanatic Join Date: Aug 2011 Location: Houston (Pearland) Age: 45 Posts: 1,205 Drives: 2011 370Z M6 Rep Power: 17	ill probably need to replace my clutch soon. im at 35k :P __________________ DRIFTING JOURNAL \| Follow me on Instagram \| Facebook \| Houston Halos

04-10-2015, 09:40 AM	#6 (permalink)
MagmaRed370z A True Z Fanatic Join Date: Jun 2014 Location: USA Posts: 1,468 Drives: 14' 370z Sport Magma Rep Power: 13	On this same note, how much does it cost to replace a clutch?

04-10-2015, 10:23 AM	#8 (permalink)
VDC_OFF A True Z Fanatic Join Date: Aug 2011 Location: Houston (Pearland) Age: 45 Posts: 1,205 Drives: 2011 370Z M6 Rep Power: 17	My clutch has been sticking to the floor at drift events. At first I found I had old black fluid so I swapped it out with Motul and it was back to clutch kicking. Now at my last event it started sticking again but this time almost immediately. Thing is it wasn't completely on the the floor, there was still a couple mm's of pressure to shift it in gear. Thought it was the CSC issue but there is no loss of fluid anywhere and after some time it goes back to normal. Someone who tracks it says I have to replace the CMC with a willwood and that would fix it. Anyone else have this problem, want to be sure before I order one. __________________ DRIFTING JOURNAL \| Follow me on Instagram \| Facebook \| Houston Halos

04-10-2015, 10:39 AM	#9 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	The willwood won't fit. There is no aftermarket CMC for our cars. Really sounds like you have the first stages of CSC failure. Swap it out for the zspeed HD. While the tranny is on the ground you might consider swapping the clutch too. It is highly recommended you replace the CMC any time you drain it completely too. VDC_OFF likes this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

04-13-2015, 09:33 AM	#12 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4211	Mine was still in perfect condition like jwick (Friction plate), but my CSC died on me (pedal stuck to floor) so figured it was time to do it all at once. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OEM TPMS Longevity	nis350	Wheels & Tires	1	11-05-2014 07:32 PM
Hankook V12 longevity	houkouonchi	Wheels & Tires	23	07-10-2011 03:01 AM
Winter Tire Longevity?	Jeffblue	Wheels & Tires	12	09-21-2010 10:56 AM
Vq longevity - tt or supercharger?	xbigb4ller69z	Forced Induction	50	07-07-2010 02:09 PM
Berk HFC longevity?	ArtVandaleigh	Intake/Exhaust	22	03-20-2010 06:37 PM