Problems with new csf radiator.... Anyone?

Glover997 · 04-20-2015, 09:03 PM

funny is.. how everyone here is bashing on Mishimoto radiators quality, design, blah blah blah .. and how good the CSF's are and are USA's proudly made ..etc. but after some good researches i didn't find anything against the Mishimotos but only good reviews lol. On the other hand, a good number of negative reviews against CSF's.. lol where the hell the quality and the "USA" made gone ? Oh and not to mention the cooling effecincy for Mishimoto's too .. ( CSF's good too in that matter but i'm just sayin )

anyways, i think i'm getting the Mishimoto .. but problem is that it's only made for MT and mine is AT ..Now i understood that i still can use it if installed an external tranny oil cooler ( which i'm using right now actually ) .. but i need to understand this, when an external trans oil cooler installed in our cars, does it usually delete the oem internal oil cooler ?!

Rusty · 04-20-2015, 09:27 PM

The only way to fine out is to stick your nose under the car. And trace the transmission lines.

Glover997 · 04-20-2015, 09:39 PM

anyone ?! Before i stick my nose under the car and trace the transmission lines

Glover997 · 04-21-2015, 07:22 AM

DEpointfive0 · 04-21-2015, 11:21 AM

Quote:

Originally Posted by Glover997

anyone ?! Before i stick my nose under the car and trace the transmission lines

What are you asking?

Glover997 · 04-21-2015, 11:37 AM

^ Did you read my post #16 ?

Thank you ..

Rusty · 04-21-2015, 11:53 AM

Well, you got 2 choices. Go ask your mechanic what he did. And see if he remembers. Or stick your nose under the car. Because no one here can answer your question. Because we didn't do the work or have seen your Z.

JWillis72 · 04-21-2015, 12:18 PM

Quote:

Originally Posted by Glover997

Now i understood that i still can use it if installed an external tranny oil cooler ( which i'm using right now actually ) .. but i need to understand this, when my mechanic installed my tranny oil cooler, did he delete my oem internal trans cooler or do i still use both ?! because if the oem oil cooler deleted then i'll go for the MT Mishimoto for sure..

I have a 7AT and run the CSF triple pass for a 6MT in my car. The only problem is that if you live where it gets cold the internal cooler also helps heat the trans fluid in cold weather. I live in south Florida so its not a problem here.

Glover997 · 04-21-2015, 12:19 PM

Quote:

Originally Posted by Rusty

Well, you got 2 choices. Go ask your mechanic what he did. And see if he remembers. Or stick your nose under the car. Because no one here can answer your question. Because we didn't do the work or have seen your Z.

lol it's not a matter of you people being seeing my lines or not .. well what i meant is - in general - when an external trans oil cooler installed in our cars, does it delete the oem internal oil cooler ?! that's my question and do pardon me if didn't make this clear at the beginning ..

JARblue · 04-21-2015, 12:43 PM

Quote:

Originally Posted by Glover997

lol it's not a matter of you people being seen my lines or not .. well what i meant is - in general - when an external trans oil cooler installed in our cars, does it delete the oem internal oil cooler ?! that's my question and do pardon me if didn't make this clear at the beginning ..

Well, there are existing connections for the factory cooler lines, so I'm going to guess that when you use those connections to connect your aftermarket trans cooler, the factory lines get abandoned. So the answer to your question would be yes. Unless he drilled and tapped new connections for the new cooler.

I'm no expert though. Just my

DEpointfive0 · 04-21-2015, 01:13 PM

Quote:

Originally Posted by Glover997

lol it's not a matter of you people being seen my lines or not .. well what i meant is - in general - when an external trans oil cooler installed in our cars, does it delete the oem internal oil cooler ?! that's my question and do pardon me if didn't make this clear at the beginning ..

You didn't.

There isn't any in general. Personally, I wouldn't delete mine

jwick · 04-21-2015, 01:38 PM

Quote:

Originally Posted by Glover997

funny is.. how everyone here is bashing on Mishimoto radiators quality, design, blah blah blah .. and how good the CSF's are and are USA's proudly made ..etc. but after some good researches i didn't find anything against the Mishimotos but only good reviews lol. On the other hand, a good number of negative reviews against CSF's.. lol where the hell the quality and the "USA" made gone ? Oh and not to mention the cooling effecincy for Mishimoto's too .. ( CSF's good too in that matter but i'm just sayin )

anyways, i think i'm getting the Mishimoto .. but problem is that it's only made for MT and mine is AT ..Now i understood that i still can use it if installed an external tranny oil cooler ( which i'm using right now actually ) .. but i need to understand this, when my mechanic installed my tranny oil cooler, did he delete my oem internal trans cooler or do i still use both ?! because if the oem oil cooler deleted then i'll go for the MT Mishimoto for sure..

CSF has had a few leak issues but their customer service is top notch and they take care of you. Mishimoto on the other hand has piss poor customer service and more than just a few quality issues. I wouldn't let any friend of mine put Mishimoto crap on their car. In fact my tuner has a pile of their failed parts in the corner of the shop.

As for your issue, no clue, drive MT

Glover997 · 04-21-2015, 02:42 PM

Quote:

Originally Posted by JARblue

Well, there are existing connections for the factory cooler lines, so I'm going to guess that when you use those connections to connect your aftermarket trans cooler, the factory lines get abandoned. So the answer to your question would be yes. Unless he drilled and tapped new connections for the new cooler.

I'm no expert though. Just my

Thank you boss that what i wanted to hear ..
Anyways, i'll trace it down n find it out ..

oh and for those who sing about the customer service of CSF being top notch, thats really great u kno .. i'll eagerly wait for a leakage so i enjoy their customer service for a good experince record! oh and not to mention that i'm located overseas so that wud be more fun !

Chuck33079 · 04-21-2015, 02:50 PM

Quote:

Originally Posted by Glover997

oh and for those who sing about the customer service of CSF being top notch, thats really great u kno .. i'll eagerly wait for a leakage so i enjoy their customer service for a good experince record! oh and not to mention that i'm located overseas so that wud be more fun !

You realize you put a part from a much more failure prone manufacturer on your car, and if something goes wrong with it they won't do a damn thing to help you, right?

theDreamer · 04-21-2015, 02:51 PM

Quote:

Originally Posted by Chuck33079

You realize you put a part from a much more failure prone manufacturer on your car, and if something goes wrong with it they won't do a damn thing to help you, right?

Well it is not like a Mishimoto part has caused engine failure....wait.

04-20-2015, 09:03 PM	#16 (permalink)
Glover997 Base Member Join Date: Nov 2011 Location: Oman. Posts: 71 Drives: 08 infiniti G35 AT Rep Power: 14	funny is.. how everyone here is bashing on Mishimoto radiators quality, design, blah blah blah .. and how good the CSF's are and are USA's proudly made ..etc. but after some good researches i didn't find anything against the Mishimotos but only good reviews lol. On the other hand, a good number of negative reviews against CSF's.. lol where the hell the quality and the "USA" made gone ? Oh and not to mention the cooling effecincy for Mishimoto's too .. ( CSF's good too in that matter but i'm just sayin ) anyways, i think i'm getting the Mishimoto .. but problem is that it's only made for MT and mine is AT ..Now i understood that i still can use it if installed an external tranny oil cooler ( which i'm using right now actually ) .. but i need to understand this, when an external trans oil cooler installed in our cars, does it usually delete the oem internal oil cooler ?! __________________ Brian Crower 4.0 stroked 08 G35 sedan. Last edited by Glover997; 04-21-2015 at 04:09 PM.

04-20-2015, 09:27 PM	#17 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,180 Drives: 2011 Nismo GM 6M Rep Power: 2684437	The only way to fine out is to stick your nose under the car. And trace the transmission lines. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

04-20-2015, 09:39 PM	#18 (permalink)
Glover997 Base Member Join Date: Nov 2011 Location: Oman. Posts: 71 Drives: 08 infiniti G35 AT Rep Power: 14	anyone ?! Before i stick my nose under the car and trace the transmission lines __________________ Brian Crower 4.0 stroked 08 G35 sedan. Last edited by Glover997; 04-20-2015 at 09:49 PM.

04-21-2015, 07:22 AM	#19 (permalink)
Glover997 Base Member Join Date: Nov 2011 Location: Oman. Posts: 71 Drives: 08 infiniti G35 AT Rep Power: 14	__________________ Brian Crower 4.0 stroked 08 G35 sedan.

04-21-2015, 11:37 AM	#21 (permalink)
Glover997 Base Member Join Date: Nov 2011 Location: Oman. Posts: 71 Drives: 08 infiniti G35 AT Rep Power: 14	^ Did you read my post #16 ? Thank you .. __________________ Brian Crower 4.0 stroked 08 G35 sedan.

04-21-2015, 11:53 AM	#22 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,180 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Well, you got 2 choices. Go ask your mechanic what he did. And see if he remembers. Or stick your nose under the car. Because no one here can answer your question. Because we didn't do the work or have seen your Z. Chuck33079, DEpointfive0 and speedfreek like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] OEM Radiator	COSMO	Parts for sale (Private Classifieds)	0	05-04-2014 09:19 PM
[FOR SALE] OEM Radiator	axwu1	Parts for sale (Private Classifieds)	4	10-17-2013 01:01 PM
[WTB] JDM Arc Radiator Cap	r3al_l3git	Parts for sale (Private Classifieds)	0	08-29-2013 02:01 AM
[FOR SALE] CSF Radiator	kpjc4eva	Parts for sale (Private Classifieds)	2	10-07-2012 10:58 PM
Radiator Cap?	wstar	Engine & Drivetrain	5	04-14-2009 12:54 PM