Alright, so I have a 2010 Z 65k miles. Back in january the fuel pump died. At the time it was already throwing codes p2a00 and p2a03 for both upstream
|
|
LinkBack | Thread Tools | Display Modes |
03-30-2015, 06:53 PM | #1 (permalink) |
Enthusiast Member
Join Date: Sep 2013
Location: Denver
Posts: 288
Drives: 2010 370Z
Rep Power: 12 |
O2 issues
Alright, so I have a 2010 Z 65k miles. Back in january the fuel pump died. At the time it was already throwing codes p2a00 and p2a03 for both upstream sensors. I figured the pump was the issue and replaced it but the light never went away.
Fast forward to february when my fender liner falls off and my car sucks up water. I live in the north so salt is everywhere. Salt coats the filters and maf sensors. I just replaced the filters and maf sensors on Thursday, as well as a clogged up pcv valve and spark plugs while I was at it. now, the car is throwing codes or both downstream o2 sensors. All I can think of is that the salt killed them but why is it just now popping up? Im not sure if I should just replace all four sensors or what? |
03-30-2015, 07:10 PM | #3 (permalink) |
Track Member
Join Date: Jun 2014
Location: Greer, SC
Age: 37
Posts: 754
Drives: 14 370Z Gun Metallic
Rep Power: 16 |
You have high flow cats right? Those are sensor 2 codes, meaning post cat. I wouldn't worry about them, they have zero effect on how your car runs.
__________________
2014 Nissan 370z Gun Metallic 6-spd
Test Pipes | Nismo CBE | Stillen Gen3 | Swift springs | Advanation Sway Bars | RJM Clutch | GTR DBA Premium Wheels |
03-30-2015, 07:23 PM | #5 (permalink) |
Track Member
Join Date: Jun 2014
Location: Greer, SC
Age: 37
Posts: 754
Drives: 14 370Z Gun Metallic
Rep Power: 16 |
How old is the "historic" fault?
__________________
2014 Nissan 370z Gun Metallic 6-spd
Test Pipes | Nismo CBE | Stillen Gen3 | Swift springs | Advanation Sway Bars | RJM Clutch | GTR DBA Premium Wheels |
03-30-2015, 07:48 PM | #7 (permalink) |
A True Z Fanatic
Join Date: May 2010
Location: nirvana
Posts: 6,394
Drives: 2023 NATM
Rep Power: 418 |
The sensor 1 code is the more serious -- that sensor might need to be replaced.
The bank 2 codes are most likely due to the HFC's, and shouldn't adversely affect anything. Replacing the sensors may or may not make a difference in getting the CEL.
__________________
Enjoy it. Destroy it. |
03-30-2015, 08:09 PM | #9 (permalink) |
Track Member
Join Date: Jun 2014
Location: Greer, SC
Age: 37
Posts: 754
Drives: 14 370Z Gun Metallic
Rep Power: 16 |
I have seen codes thrown for the same thing when using nonfoulers / O2 extensions, it's not always inefficiency.
__________________
2014 Nissan 370z Gun Metallic 6-spd
Test Pipes | Nismo CBE | Stillen Gen3 | Swift springs | Advanation Sway Bars | RJM Clutch | GTR DBA Premium Wheels |
03-30-2015, 08:17 PM | #10 (permalink) |
Enthusiast Member
Join Date: Sep 2013
Location: Denver
Posts: 288
Drives: 2010 370Z
Rep Power: 12 |
I appreciate the input.
as far as the upstreams go, both of them have been throwing codes in the past although only one is being shown as historic. Its just confusing to me that all 4 are throwing codes |
03-30-2015, 09:45 PM | #11 (permalink) |
A True Z Fanatic
Join Date: Aug 2011
Location: Perrysburg, OH
Posts: 17,992
Drives: '11 Nismo #528 GM
Rep Power: 36941 |
First, the p2a00 and p2a03 are codes a number of use have had on here with little to no reason. I believe some have found intake piping leaks and that remedied their problem. In my case I checked the AFR while the car was running and didn't see any problems that would justify the code. In the end I just turned the p2a00 and p2a03 codes off through uprev.
Now onto your other codes. I had the exact same codes except on the primary o2 sensors last summer after an autox oops broke both my primary o2 sensors. For o2 sensors to work they need power and atleast on our cars there's a fuse in the power circuit. In my case the fuse was blown as a result of the broken o2 sensors. I'd check the service manual (should be able to find a link to it on here) and locate the fuse and make sure it's still good. More likely than not it's in the fuse box buried next to the battery meaning you'll have to pull the battery to get to it. Also if you do end up replacing the primary o2 sensors make sure you get the right ones. I believe it was mid 2010 that they changed the connector resulting in a different part number. I know when I got mine almost nobody showed that there were two different sensors depending on build date.
__________________
'11 370Z Nismo #528 Fast Intentions | Stillen | Motordyne | Uprev | CSF | Zspeed | Z1 Motorsports | AST | Swift | SPC | SPL | Whiteline | Hotchkis | Bride | Schroth | Robispec | Cusco | Nismo | Volk | Forgestar | Hoosier | RJM '17 Titan Bone Stock |
03-30-2015, 10:01 PM | #12 (permalink) |
Enthusiast Member
Join Date: Sep 2013
Location: Denver
Posts: 288
Drives: 2010 370Z
Rep Power: 12 |
Just checked the fuse box and the fuse is not blown.
thanks for the info about the o2 sensor. I thought it wasnt until 2011 that it changed. Ill be sure to order the correct sensor if I go that route |
03-31-2015, 05:07 PM | #13 (permalink) |
Enthusiast Member
Join Date: Sep 2013
Location: Denver
Posts: 288
Drives: 2010 370Z
Rep Power: 12 |
http://i.imgur.com/p3StBEG.jpg
I logged the O2 readings today. They are constant at .28 volts. Unless anyone can chime in and say otherwise, to me that means they have gone bad? |
04-02-2015, 01:08 PM | #14 (permalink) |
Enthusiast Member
Join Date: Sep 2013
Location: Denver
Posts: 288
Drives: 2010 370Z
Rep Power: 12 |
So I replaced the downstream oxygen sensors. One of them were completely plugged with steel wool from last summer when I was running test pipes. I assume that was causing the codes for the downstream sensor
|
04-02-2015, 03:39 PM | #15 (permalink) | |
A True Z Fanatic
Join Date: May 2010
Location: nirvana
Posts: 6,394
Drives: 2023 NATM
Rep Power: 418 |
Quote:
I wonder if some sort of filter screen might work better. Glad you resolved the problems
__________________
Enjoy it. Destroy it. |
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
GTM issues | spawn350 | Forced Induction | 80 | 09-27-2012 09:21 PM |
MBC issues? | AWX Z34 | Forced Induction | 7 | 04-06-2012 11:13 PM |
Issues with my Z HELP! | Brian370 | Engine & Drivetrain | 62 | 09-23-2011 12:03 AM |
thinking of buying 370z, then GTM turbo's , but overheat issues,oil issues ?? | Christopher | Nissan 370Z General Discussions | 19 | 10-16-2009 04:55 PM |
Initial Z issues that are now non-issues...... | cave vulture | Nissan 370Z General Discussions | 1 | 09-06-2009 11:19 PM |