Best Bolt on Setup?

bullitt5897 · 03-30-2015, 04:12 PM

so far the highest basic bolt on HP goes to a owner here in GA:

Z1 intake manifold
09 Maxima Throttle bodies
Stillen G3 intake
Z1 headers and test pipes
Tomei single exit exhaust

It made somewhere in the ball park of 348whp... Call Jon at Z1 motorsports they have a 400hp package that will get you set off in the right direction! we have about 2 dozen 330+whp Z's in atlanta...

vector7 · 06-18-2015, 05:56 PM

Quote:

Originally Posted by bullitt5897

so far the highest basic bolt on HP goes to a owner here in GA:

Z1 intake manifold
09 Maxima Throttle bodies
Stillen G3 intake
Z1 headers and test pipes
Tomei single exit exhaust

It made somewhere in the ball park of 348whp... Call Jon at Z1 motorsports they have a 400hp package that will get you set off in the right direction! we have about 2 dozen 330+whp Z's in atlanta...

Any examples of the 09 Maxima Throttle bodies mounted on a VQ37?

What is involved in getting these working and the gains they might show?

Elmo370z · 06-18-2015, 07:21 PM

Custom work

Elmo370z · 06-18-2015, 07:23 PM

1slow370z had his custom manifold made to fit those twin 70mm tb's

Elmo370z · 06-18-2015, 07:37 PM

Do you plan on tuning with uprev or ecu tek? You might be able to squeeze more hp tuning with ecu tek

vector7 · 06-18-2015, 11:13 PM

Quote:

Originally Posted by Elmo370z

Custom work

Quote:

Originally Posted by Elmo370z

1slow370z had his custom manifold made to fit those twin 70mm tb's

Thanks for the insight Elmo370z.

Quote:

Originally Posted by Elmo370z

Do you plan on tuning with uprev or ecu tek? You might be able to squeeze more hp tuning with ecu tek

Yes, I'm seeing the ECUTEK now showing some real advantages, not sure if they have roms ready for Q50 yet.

Also looking for a best parts recipe for the 3.7 in the Q that would make good noticeable improvements to possibly 320whp/270wtq with a tune.

Z1 intake manifold: Available

But most parts are not available yet:

Quote:

Stillen G3 intake: Not Available (have G2s)
Z1 headers and test pipes: Not Available
Tomei single exit exhaust: Not Available

Need some headers to get the intake breathing, not sure if anyone is making headers for the Q yet though, might get by with some HFCs.

You guys collectively are the most knowledgeable on the planet I've seen in making the VQ37 scoot.

If I had money to burn; like everyone else would just send their car to FI for their TT kit and call it a day.

Elmo370z · 06-18-2015, 11:42 PM

Bullet is far more knowledgeable than me. Good luck with the build

LENTZ · 07-26-2015, 08:13 PM

337WHP

Stillen SS Catback Dual Exhaust System
Stillen Gen 3 Ultra Long Tube Dual Intake Kit
Z1 Motorsports VQ Performance Headers
Z1 Motorsports SS Test Pipes
Z1 Motorsports VQ37 Intake Plenum Power Mod
Z1 Motorsports Urethane Transmission Mount
Uprev Tune

PongSanity · 08-27-2015, 08:26 PM

Quote:

Originally Posted by bullitt5897

so far the highest basic bolt on HP goes to a owner here in GA:

Z1 intake manifold
09 Maxima Throttle bodies
Stillen G3 intake
Z1 headers and test pipes
Tomei single exit exhaust

It made somewhere in the ball park of 348whp... Call Jon at Z1 motorsports they have a 400hp package that will get you set off in the right direction! we have about 2 dozen 330+whp Z's in atlanta...

you mean this g37? ^_^

https://www.youtube.com/watch?v=9UPm...fqIR_uw5IrCrbQ

i swear i watch this vid daily.

Elmo370z · 08-27-2015, 08:45 PM

Ill be breaking that record hopefully within the next year if someone else doesnt beat me to.the punch

MicntaeG35 · 08-27-2015, 09:21 PM

I'm hoping to see huge gains after my build.
What do yall think about this setup:
FI 12" exhaust (or motordyne e370, can't decide)
Motordyne ART pipes
Z1 shorties
Takeda CAI (already installed)
Motordyne M370 manifold
Ported and polished throttle bodies
TWN short shifter
And to top it all off, tune with ECUTEK

jchammond · 08-27-2015, 09:40 PM

i've already acknowledged it's around 6k for 60hp,using premium parts!
(+ or - a bit)

Elmo370z · 08-28-2015, 12:27 AM

All depends of how steep of a slope you wanna tread. Or spend another 14k and get 300 extra whp.

nismolucino · 08-29-2015, 01:20 AM

317whp and 269 ftlbs
Stillen Gen 3 Intakes
Bored Throttle Bodies by Maxbore
Ported Upper & Lower Intake Manifold by Synergy
ARK Grip V2 Catback Exhaust
CNT Racing Resonated Test Pipes
NST Underdrive Pulleys
Jwt Flywheel

May be installing z1 headers in the future, not really too power hungry. More suspension work is important to me right now.

03-30-2015, 04:12 PM	#16 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	so far the highest basic bolt on HP goes to a owner here in GA: Z1 intake manifold 09 Maxima Throttle bodies Stillen G3 intake Z1 headers and test pipes Tomei single exit exhaust It made somewhere in the ball park of 348whp... Call Jon at Z1 motorsports they have a 400hp package that will get you set off in the right direction! we have about 2 dozen 330+whp Z's in atlanta... nvdave04 and midlife like this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

06-18-2015, 11:42 PM	#22 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,710 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Bullet is far more knowledgeable than me. Good luck with the build vector7 likes this.

08-27-2015, 09:21 PM	#26 (permalink)
MicntaeG35 Enthusiast Member Join Date: May 2014 Location: Trussville, AL Posts: 470 Drives: 11 370z nismo #452 Rep Power: 11	I'm hoping to see huge gains after my build. What do yall think about this setup: FI 12" exhaust (or motordyne e370, can't decide) Motordyne ART pipes Z1 shorties Takeda CAI (already installed) Motordyne M370 manifold Ported and polished throttle bodies TWN short shifter And to top it all off, tune with ECUTEK __________________ A wounded man shall say to his assailant "If I live, I will kill you. If I die, you are forgiven."

08-27-2015, 09:40 PM	#27 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	i've already acknowledged it's around 6k for 60hp,using premium parts! (+ or - a bit) __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

08-28-2015, 12:27 AM	#28 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,710 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	All depends of how steep of a slope you wanna tread. Or spend another 14k and get 300 extra whp. jchammond likes this.

06-18-2015, 07:21 PM	#18 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,710 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Custom work

06-18-2015, 07:23 PM	#19 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,710 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	1slow370z had his custom manifold made to fit those twin 70mm tb's

06-18-2015, 07:37 PM	#20 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,710 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Do you plan on tuning with uprev or ecu tek? You might be able to squeeze more hp tuning with ecu tek

07-26-2015, 08:13 PM	#23 (permalink)
LENTZ Base Member Join Date: Jun 2015 Location: Maple Valley, WA Posts: 92 Drives: 2012 370Z Sport Rep Power: 10	337WHP Stillen SS Catback Dual Exhaust System Stillen Gen 3 Ultra Long Tube Dual Intake Kit Z1 Motorsports VQ Performance Headers Z1 Motorsports SS Test Pipes Z1 Motorsports VQ37 Intake Plenum Power Mod Z1 Motorsports Urethane Transmission Mount Uprev Tune

08-27-2015, 08:45 PM	#25 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,710 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Ill be breaking that record hopefully within the next year if someone else doesnt beat me to.the punch

08-29-2015, 01:20 AM	#29 (permalink)
nismolucino Enthusiast Member Join Date: Mar 2013 Location: Rahway,NJ Posts: 297 Drives: 2010 40th 370z Rep Power: 364	317whp and 269 ftlbs Stillen Gen 3 Intakes Bored Throttle Bodies by Maxbore Ported Upper & Lower Intake Manifold by Synergy ARK Grip V2 Catback Exhaust CNT Racing Resonated Test Pipes NST Underdrive Pulleys Jwt Flywheel May be installing z1 headers in the future, not really too power hungry. More suspension work is important to me right now. jchammond likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] WTB 15 mm Bolt on spacer	TonySlimfast	Parts for sale (Private Classifieds)	0	06-12-2013 01:56 PM
[WTB] Bolt ons, etc!	SmallermouseZ	Parts for sale (Private Classifieds)	9	03-27-2012 03:07 PM
Why is it always the LAST *@#$& BOLT!?!	Dembflyr	DIY Section (Do-It-Yourself)	13	04-23-2010 10:04 PM
Lug bolt covers	1013mm	Wheels & Tires	4	02-05-2010 10:07 PM
Full Stillen Bolt-On Setup - Videos!	RCZ	Intake/Exhaust	114	06-15-2009 05:32 PM