Metal Buzzing Sound When Skipping to 6th

Bad Boy

I recently noticed that when I accelerate fast from a stop and go to 2nd or 3rd, reach my desired speed of say 60 or 70, then go straight to 6th gear, there is a weird metal buzzing sound coming from below the shift knob, its quick and only happens just before it sits into the gear...

But it does not do it when I go through all gears, aka going into 6th from 5th.

Am I not supposed to skip gears? is this normal? or is something wearing out?

Thanks.

DOOMMONKEY777

Synchronos are probably going bad on ur 6th gear. Got sound recorded? Post it, its easier to ummmm.....pin point ur prob.

__________________
Kids don't do Drugs, Drugs are bad, so let the professional druggies do Drugs for you. 537whp/496lb/tq@8-9PSI 93 octane

1slow370

Yup sixth gear synchro been a problem since 09, if you dont baby it the synchros in this trans suck.

__________________
ANSWER PRICE LIST
Answers - - - - - - - - - - - - - - - - $0.75
Answers (requiring thought) - - - - $1.25
Answers (correct) - - - - - - - - - - $12.50

Bad Boy

So what am I looking at? Is it an easy do it yourself job with simple tools? and how much does a dealership usually charge to fix this?

Bad Boy

I have the Toyota Silver extended warranty and im pretty sure it falls under the category. So all I have to pay if transmission goes bad or some components of it is $100. So I dont think I should worry too much.
Only question is, should I wait to bring it in? Or bring it in and describe the issue?

BGTV8

Toyota ?? thought it was a Nissan or did you purchase used from a Toymota dealer

Bad Boy

Actually I bought both from a Dodge dealer, lol!
But the Toyota Warranty, at least the one I have, covers most any Japanese car.

Bad Boy

This is a list of all transmission related parts covered. I should be covered right?

TRANSMISSION/TRANSAXLE/TRANSFER CASE:

Transmission/transaxle case and all internally lubricated parts including ring and pinion gears; oil pump, cover, gears, housing and vanes; torque converter; valve body(s); throttle valve; valve pack; governor, gear and cover; parking gear and pawl; roll pins; sprags; sprockets; chain; springs; stator and shaft; pressure regulator valve; pressure switches; solenoids; bands; automatic transmission/transaxle clutch, drums, pistons and steel plates; planetary and sun gears; servos and rings; blockers; synchronizer hubs and keys; bearings; bushings; supports and shafts; control rings; yoke; extension housing; speedometer drive gears; accumulators and rings; adjusters; all internal fasteners, nuts and bolts; shift cover and forks; separate bell housing; transfer case and all internal parts contained within the transfer case; seals and gaskets. (STANDARD TRANSMISSION CLUTCH ASSEMBLIES AND ALL COMPONENT PARTS ARE NOT COVERED.)

JARblue

You need to be patient when skipping gears. Just hang out at the 6th gear gate for a second or so while the RPMs settle down. If you have SRM, this is very simple and just a matter of waiting. If you don't have SRM, you need to time the shift properly to avoid grinding the synchros - shift exactly at the proper RPMs as they are dropping or rev match yourself to get the RPMs in the proper range after they drop.

Synchro replacement requires removing the transmission and taking it apart. Absolutely do not DIY unless you have the proper tools and experience.

__________________

JARblue

It's probably covered. But why are you asking us? Ask Toyota.

__________________

1st

why wouldnt you just go 4-5-6....

Bad Boy

Cause if I exit out quick onto a main road of vehicles traveling at 50+ mph, Most people will usually hit 60 in 2nd gear... why go through the rest of the gears? you will extend the time your engine is at high RPM for no reason.

1st

I guess under certain circumstances it makes sense.

DOOMMONKEY777

Its cheaper to buy new transmission. Or slightly used from a donor.

__________________
Kids don't do Drugs, Drugs are bad, so let the professional druggies do Drugs for you. 537whp/496lb/tq@8-9PSI 93 octane

Bad Boy

I think everything is fine, I was testing it out today and I think I just have to rev match better, then it doesnt happen. But yeah, my warranty covers it for the next 3 years... so Im good.