Oil flter sandwich w/sensor and cooler ports
 

has anyone found a oil filter sandwich that has ports for oil temp and pressure sensors and a oil cooler? I've got defi gauges that I'd like to install but i dont think running 3 tees off of where the oem pressure sensor would work =P

Yeah, I have a mishimoto that has 3 ports. Want it?

saw way too many bad reviews on the mishi sandwich while I was searching. Thank you though.

you could just run the T fitting from the pressure sensor and pick an aftermarket pressure gauge to go with it. the stock temp gauge works well. why replace it? otherwise, your best bet is to get a new oil pan that is pre-tapped for extra sensors!

Already replacing the stock stuff with defis.

I'm going boost so I'll be going off the OEM sensor for the oil feed, trying to avoid having a abortion of fittings around it. Lol.

phunk may be working on a new baffled oil pan, something you'd probably want anyway if you're going boost. otherwise, you can always do an oil pan spacer:

https://www.z1motorsports.com/g37_37...oducts_id=8184

I have DEFI sensors. Oil temp in the drain plug and the oil press in the port where the useless OEM oil switch use to be. DONE!