Stillen G3 on 2015 model?

Zero dark

I know the motor is the same but is there a reason the G3 doesn't come up for the 2015 370's? All I can find is the greddy one on stillens website. Can I just get the G3 for my 2015 model

TerribleONE

Probably just haven't updated their site. I don't see a reason why it wouldn't fit.

__________________

Zero dark

Right. I'm going to wait till I hit a few thousand miles first. A popular tuning shop in my area charge $180 for install

Elmo370z

Thats crazy, Just install it yourself. Only takes about a hour or so.

Zero dark

Lol I'm not messing with bumper removal.

Powerwiz

Got a 2015 370 I bought end of Dec...Gen 3 and anything else for a late model Z works..they just have not updated there website. Also there has been no revision of anything just about in years on the 370z.

Also all of the people just about that make parts like that respond to emails pretty darn quick..usually in a few hours so shoot them a email or call.

__________________
2015 370z Touring 6MT Black Metallic | Stillen Gen 3 CAI | Ark Performance DT-S exhaust

Powerwiz

That is very very simple to do. Its literally all pop out plastic pegs. I think 10 on the bottom and a series on top. Put your hand under the bumper and it pops off.

__________________
2015 370z Touring 6MT Black Metallic | Stillen Gen 3 CAI | Ark Performance DT-S exhaust

Zero dark

no kidding? when it gets warmer ima get underneath and see

Powerwiz

You will find that most minor things are easy. There is no mystery to cars on most things expect the mystery in your head. Heres a basic guide. Its like a exhaust...Its like 12 bolts that hold it together. It hangs off the frame with rubber thingys. Easy easy to remove and install another. I think it took me a hour and a half to do the whole thing.

The hardest part of the G3 install and it comes with a illustrated picture guide is you have to dremel the air duct holes behind the bumper to make them wider for the intake to pass through. Alot seem to use anything but a dremel and that can be hard. Dremel makes it cake.

DIY: Front Bumper Removal

__________________
2015 370z Touring 6MT Black Metallic | Stillen Gen 3 CAI | Ark Performance DT-S exhaust

gomer_110

There's also two bolts, one on each end of the bumper up underneath the wheel well liners.

__________________
'11 370Z Nismo #528 Fast Intentions | Stillen | Motordyne | Uprev | CSF | Zspeed | Z1 Motorsports | AST | Swift | SPC | SPL | Whiteline | Hotchkis | Bride | Schroth | Robispec | Cusco | Nismo | Volk | Forgestar | Hoosier | RJM
'17 Titan Bone Stock

OTW Z-Boy

And on the drivers side don't forget to wrap the AC lines. The intake tube will rest in a position that over time if lines aren't wrapped will cause a leak. There is a bunch of information in the DIY section on this install.

__________________
2014: Nismo 370z #495 Magnetic Black - Stillen Gen3 CAI | SPL F/R Camber Arms | HKS Hypermax IV | JDM Rear Fog Light |GT-R Push Start Button | Z1 2 Piece D/S | Illuminated Kicks | Tommykaira | Work VS-XX BKB Step Lip +23/+13 19" 9.5/11 | Fast Intentions RHFC TDX CBE 12" CF | EcuTek

wsarver

IMO if bumper removal isn't for you, you may consider a shorter intake system. Air filters don't last forever. You'll need to get in there sooner or later for maintenance. It's not difficult just take your time and be gentle when pulling.

On the above post about the AC lines.... Yea I found that out the hard way. Bought the car preowned with the intakes already installed and they didn't wrap the AC lines. My AC lines burst and made one heck of a mess at summer time in Florida. That wasn't fun and very expensive at the dealer. Ran 500 or so. Live and learn.

Zero dark

Nice diy this will help for sure

Zero dark

Should i tune if this is the only mod i plan to do this year

Z-Girl 12

That is why I didn't do my install...bumping removal is way to annoying.

__________________
2012 Z-SOLD
2014 Nismo #565 Fast Intentions CBE/HFC/Swift/SPC/RJM/H&R-15/20mm/Z1 CAI/Headers/Intake Manifold w/Uprev Tune 328.31whp/263.64tq