Stillen G3 on 2015 model?

Elmo370z · 02-15-2015, 11:33 PM

Bumper removal is easy as 1,2,3. I just don't see paying someone 200 bucks for a job takes about a hour to install.

juld0zer · 02-21-2015, 05:44 AM

Make sure you wrap the AC lines in a high density foam material or rubber. I also strongly advise cutting the holes about 5mm wider all round so you can wrap the section that passes thru with a high density foam like EVA. This will prevent a lot of the rattling and loose piping complaints people often get. The piping is held in place by gravity....

Brett4 · 02-24-2015, 04:55 PM

A little late to the thread, but just confirming that the Stillen Gen 3 intake definitely does fit on the 2015. I got a 2015 Sport 7AT in Dec and had both that and their CBE installed right away (actually had it installed at Stillen since I'm in So Cal, and they gave me a little break on labor since I was the 2015 model guinea pig). Works and sounds great - definitely recommended.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WORK Gnosis GR201/GR202 * new 2015 model *	RavSpec	Tires/Wheels	2	03-16-2015 12:16 AM
2015 1LE vs 2015 GT track pack	UNKNOWN_370	Other Vehicles	19	01-21-2015 09:04 PM
WORK Gnosis GR201 / GR202 * new 2015 model *	RavSpec	RavSpec - JDMwheel	0	01-16-2015 05:13 PM
Buying 2009 Model now VS. Wait till Next 2010 Model arrives	khsysh	Nissan 370Z General Discussions	9	03-06-2009 04:38 AM

02-15-2015, 11:33 PM	#16 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Bumper removal is easy as 1,2,3. I just don't see paying someone 200 bucks for a job takes about a hour to install.

02-21-2015, 05:44 AM	#17 (permalink)
juld0zer Enthusiast Member Join Date: Nov 2012 Location: Sydney Posts: 428 Drives: 11 Nissan 370Z MB M6 Rep Power: 139	Make sure you wrap the AC lines in a high density foam material or rubber. I also strongly advise cutting the holes about 5mm wider all round so you can wrap the section that passes thru with a high density foam like EVA. This will prevent a lot of the rattling and loose piping complaints people often get. The piping is held in place by gravity....

02-24-2015, 04:55 PM	#18 (permalink)
Brett4 Base Member Join Date: Dec 2014 Location: Orange County, CA Posts: 1 Drives: 2015 370Z Sport Rep Power: 11	A little late to the thread, but just confirming that the Stillen Gen 3 intake definitely does fit on the 2015. I got a 2015 Sport 7AT in Dec and had both that and their CBE installed right away (actually had it installed at Stillen since I'm in So Cal, and they gave me a little break on labor since I was the 2015 model guinea pig). Works and sounds great - definitely recommended.