![]() |
The pin is pivoting in the pan since it is the least resistance. Even reamed out which is a good idea, there will be greater contact area between the pin
|
![]() |
|
LinkBack | Thread Tools | Display Modes |
|
![]() |
#1 (permalink) |
A True Z Fanatic
Join Date: Mar 2009
Location: Chicago
Posts: 3,669
Drives: 370
Rep Power: 974724 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
The pin is pivoting in the pan since it is the least resistance. Even reamed out which is a good idea, there will be greater contact area between the pin and flapper than there will be in the .25" of contact on either end. The flappers are very easy to move in the prototype. Just lightly blowing on them pushes them open.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fuel starvation, who else? | Mike | Track / Autocross / Drifting / Dragstrip | 556 | 12-14-2016 03:44 PM |
is there a fix to fuel starvation? | bleunetizen | Engine & Drivetrain | 32 | 02-18-2016 01:15 PM |
oil starvation problem? | nismo13807 | Track / Autocross / Drifting / Dragstrip | 73 | 02-16-2015 10:33 AM |
fuel starvation | Arrvaxx | Engine & Drivetrain | 39 | 09-11-2014 09:54 PM |
Oil starvation? | j-rho | Track / Autocross / Drifting / Dragstrip | 3 | 08-12-2014 10:18 AM |