Hi rpm oil starvation

Rusty · 02-13-2015, 02:54 PM

The trap doors are machined aluminum.

Felix 808 · 02-13-2015, 03:59 PM

That is an impressive pan you have there Rusty

I'm starting to show signs of pan envy

, until I look at my needs & the price difference.

jrb55gh · 02-13-2015, 11:16 PM

Quote:

Originally Posted by phunk

I have glanced around trying to find the doors/flaps in my supply catalogs but havent found anything yet. Might have to make the flaps. It looks like they might have. They appear to be aluminum. Wouldnt be too big of a deal to make them but to find them for $5 each in a catalog sure would be nice.

I Googled "aluminum aircraft hinge" and came up with this link:

Extruded Piano Hinge On Wicks Aircraft Supply

phunk · 02-13-2015, 11:25 PM

Excellent find! Just a quick glance on my iPad it looks like it might be perfect. Extruded aluminum hinge. Genius!

Sometimes little pieces like that can be tedious to machine and set-back product completion. I will take a detailed look again tomorrow and maybe order a foot to get into CAD and try and work with.

Thanks!

need4speed255 · 02-14-2015, 12:16 PM

Just a little heads up on the aircraft hinge. Those are usually a tight fitting hinge so they wont easily flap around to well just from gravity alone. You could remove the hinge pin and turn the pin down if you need more clearance. Chuck the pin in a drill and take some material off with sand paper and scotch pads.

phunk · 02-14-2015, 12:28 PM

Thanks for the heads up. I can toss their pin and get any diameter rod locally if their pin is tight.

phunk · 02-14-2015, 05:14 PM

I have put in an email to the supplier of that extruded hinge to see if they can sell it to me in its raw extruded form without the notches cut in it. I will call them Monday if I dont hear back.

phunk · 02-17-2015, 03:39 PM

They said that the hinge is machined before they receive it. I dont know if I will find the original source of it.

I ordered some material to machine a prototype. Since it was $90 a block, I only ordered 2 for now.

jrb55gh · 02-18-2015, 07:51 PM

Quote:

Originally Posted by phunk

I ordered some material to machine a prototype. Since it was $90 a block, I only ordered 2 for now.

Too bad you can't get more for recycling all those chips you are going to make.

phunk · 02-18-2015, 08:15 PM

I get about $50 per giant garbage can full of it. The chips arent worth much because they are contaminated with machining coolant

phunk · 05-25-2015, 12:52 AM

Finally had a chance to machine most of a pan this weekend. I have to pick up a couple cutters Tuesday to make some finishes passes then I can remove it from the CNC and show it off. I also have to get a piece laser cut for it this week.

I will probably start a thread about it around next weekend and see how many people would want one.

Mike · 05-25-2015, 10:39 AM

nice! I'm interested!

Rusty · 05-25-2015, 10:49 AM

Quote:

Originally Posted by phunk

Finally had a chance to machine most of a pan this weekend. I have to pick up a couple cutters Tuesday to make some finishes passes then I can remove it from the CNC and show it off. I also have to get a piece laser cut for it this week.

I will probably start a thread about it around next weekend and see how many people would want one.

Quote:

Originally Posted by Mike

nice! I'm interested!

See phunk, I told you.

cdoxp800 · 05-25-2015, 10:53 AM

nice! I'm interested!

BGTV8 · 05-25-2015, 05:36 PM

PM'd.

02-13-2015, 02:54 PM	#46 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,180 Drives: 2011 Nismo GM 6M Rep Power: 2684437	The trap doors are machined aluminum. phunk likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

02-13-2015, 03:59 PM	#47 (permalink)
Felix 808 A True Z Fanatic Join Date: Oct 2011 Location: Camarillo, CA Posts: 1,063 Drives: 2011 PW/Grey T/S 7AT Rep Power: 2807	That is an impressive pan you have there Rusty I'm starting to show signs of pan envy , until I look at my needs & the price difference. Rusty likes this. __________________ Semper Fi Μολὼν λαβέ

02-13-2015, 11:25 PM	#49 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	Excellent find! Just a quick glance on my iPad it looks like it might be perfect. Extruded aluminum hinge. Genius! Sometimes little pieces like that can be tedious to machine and set-back product completion. I will take a detailed look again tomorrow and maybe order a foot to get into CAD and try and work with. Thanks! FL 4Motion, cdoxp800, Rusty and 1 others like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

02-14-2015, 12:16 PM	#50 (permalink)
need4speed255 Enthusiast Member Join Date: Oct 2014 Location: Indiana Posts: 262 Drives: 15Nsmo/99 EclipseGST Rep Power: 11	Just a little heads up on the aircraft hinge. Those are usually a tight fitting hinge so they wont easily flap around to well just from gravity alone. You could remove the hinge pin and turn the pin down if you need more clearance. Chuck the pin in a drill and take some material off with sand paper and scotch pads. phunk likes this.

02-14-2015, 12:28 PM	#51 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	Thanks for the heads up. I can toss their pin and get any diameter rod locally if their pin is tight. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

02-14-2015, 05:14 PM	#52 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	I have put in an email to the supplier of that extruded hinge to see if they can sell it to me in its raw extruded form without the notches cut in it. I will call them Monday if I dont hear back. jrb55gh likes this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

02-17-2015, 03:39 PM	#53 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	They said that the hinge is machined before they receive it. I dont know if I will find the original source of it. I ordered some material to machine a prototype. Since it was $90 a block, I only ordered 2 for now. cdoxp800 likes this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

02-18-2015, 08:15 PM	#55 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	I get about $50 per giant garbage can full of it. The chips arent worth much because they are contaminated with machining coolant __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

05-25-2015, 10:39 AM	#57 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	nice! I'm interested! __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

05-25-2015, 10:53 AM	#59 (permalink)
cdoxp800 A True Z Fanatic Join Date: May 2009 Location: FL Posts: 1,337 Drives: 2011 Nismo Rep Power: 19	nice! I'm interested! __________________ 2011 Brilliant Silver NISMO 370z. #: 0046. PPE LTH \| MillSpec Cats \| F.I Exhaust \| Akuma Intakes \| Rotora 6/4 Brakes

05-25-2015, 05:36 PM	#60 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,514 Drives: 09 Nissan 370Z M6 Rep Power: 39973	PM'd.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fuel starvation, who else?	Mike	Track / Autocross / Drifting / Dragstrip	556	12-14-2016 04:44 PM
is there a fix to fuel starvation?	bleunetizen	Engine & Drivetrain	32	02-18-2016 02:15 PM
oil starvation problem?	nismo13807	Track / Autocross / Drifting / Dragstrip	73	02-16-2015 11:33 AM
fuel starvation	Arrvaxx	Engine & Drivetrain	39	09-11-2014 10:54 PM
Oil starvation?	j-rho	Track / Autocross / Drifting / Dragstrip	3	08-12-2014 11:18 AM