Replacing differential cover DIY

Dragon_Ball_Z · 02-03-2015, 02:02 AM

Quote:

Originally Posted by YzGyz

Yes, line them up.

YzGyz

Awesome, thank you

-Raj

Rusty · 02-03-2015, 02:51 PM

The driveshaft is already balanced from the factory. The only time it would need to be rebalanced is if a weight came off. If you have the type in which you unbolt a flange from a flange to remove the driveshaft. You want to mark the 2 flanges before you remove it. So when you put it back together. The 2 marks line back up.

Never heard of balancing the LSD. I've installed a few. Shim it to get your bash lash, and toe pattern. Some have a crush sleeve. Never balance?

YzGyz · 02-03-2015, 10:20 PM

More like shimmed to make it balanced?

YzGyz

Rusty · 02-03-2015, 10:33 PM

Quote:

Originally Posted by YzGyz

More like shimmed to make it balanced?

YzGyz

No. Layman terms. Use shims or a crush sleeve on the pinion to set the toe pattern. Moving the pinion forward of rearward. Use shims between the bearings and the carrier, or large screw adjusting nuts to set the backlash. What you are doing is moving the carrier with ring gear left or right.

Dragon_Ball_Z · 02-17-2015, 05:35 PM

Is there a DIY on swapping a base diff to LSD?

-Raj

L33T Z34 · 02-26-2015, 02:56 PM

Quote:

Originally Posted by dP3NGU1N

Do you even need to drop the diff to remove the cover?

LuLZ! Yes! The fawk'n REAR mount stud (38354-0C00A) goes rite N2 the cover Yo!
Like I said in the past, this is totally a RICER mod if u install the finned diff cover w/no LSD upgrade and/or Final Drive Ratio Xchange. Soooo not worth the time/effort! It maaaay-B worth it if u'r installing solid AL diff mounts, but prob not! Its really meant for dudes who have dropt the FD to 4.08/4.36 to keep the gear lube c00ler.

02-03-2015, 02:51 PM	#47 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,186 Drives: 2011 Nismo GM 6M Rep Power: 2684437	The driveshaft is already balanced from the factory. The only time it would need to be rebalanced is if a weight came off. If you have the type in which you unbolt a flange from a flange to remove the driveshaft. You want to mark the 2 flanges before you remove it. So when you put it back together. The 2 marks line back up. Never heard of balancing the LSD. I've installed a few. Shim it to get your bash lash, and toe pattern. Some have a crush sleeve. Never balance? __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html Last edited by Rusty; 02-03-2015 at 02:56 PM.

02-03-2015, 10:20 PM	#48 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 63	More like shimmed to make it balanced? YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

02-17-2015, 05:35 PM	#50 (permalink)
Dragon_Ball_Z A True Z Fanatic Join Date: Jul 2014 Location: Mississippi Posts: 1,117 Drives: Nismo& Sport/Touring Rep Power: 17	Is there a DIY on swapping a base diff to LSD? -Raj __________________ Build in Progress

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Differential Cover Factory vs Aftermarket	Dragon_Ball_Z	Engine & Drivetrain	34	01-30-2015 09:30 PM
[FOR SALE] Nismo differential cover (fined)	DriftKr6l	Parts for sale (Private Classifieds)	14	04-10-2014 11:47 AM
Removing/replacing passenger round airbag light cover	tdd1986	DIY Section (Do-It-Yourself)	0	03-23-2012 04:16 PM
Nissan Differential Cover! $170 Shipped!	Rob@AAMComp	Drivetrain/Engine	1	05-30-2010 06:44 PM