Introducing the Z1 Motorsports 370Z Oil Cooler Kit *Customizable*

[Dustin@Z1]

Ready for shipping, we have taken the 370Z oil cooler system to the next level by making you, the consumer, the one who decides what you want for your oil cooler kit!

Unlike other, similar oil cooler kits where you are only offered 1 line type with 1 particular oil cooler. The Z1 Motorsports 370Z Oil Cooler kit allows you to choose from a variety of options to custom tailor the oil cooler to your specifications depending on your intended driving scenarios, geographic location and other modification installed.

The heart of any oil cooler system is the oil cooler's core. In the Z1 Motorsports package, we went straight to the experts and chose to use a Setrab oil cooler core in your choice of 3 different sizes: 19 row; 25 row; or 34 row. The Setrab 6 series core is well known in many racing applications and features the following benefits:

• Rugged Construction, designed for racing and able to withstand vibration
• Light weight design
• Low pressure drop across the cooler core

The Core dimensions and recommended applications are as follows below:

19 Row (13" x 1 1/4" x 5 1/3") -- Recommended for most light street applications or applications in colder climates where less cooling is required. Will work with all aftermarket intakes.

25 Row (13" x 1 1/4" x 7 1/2") -- Recommended for more intense applications where occasional track use will be seen, also for more moderate climates. Will work with most aftermarket intakes.

34 Row (13" x 1 1/4" x 10 1/4") -- Recommended for forced induction applications, serious track applications, or in high temperature climates where extreme conditions may exist. This is our best selling cooler but it will require modifications to install with some intake systems, will not work with Stillen Gen 3 intakes without relocating cooler. NISMO 370Z owners will have to do some minor modifications to the front chassis dampner in order to install this cooler.

The next key part to any oil cooler system is the Oil Lines. Using -10 Stainless Steel Braided. All of the Lines feature high quality aluminum -10 AN fittings, making for a leak proof and durable system.


For the oil filter sandwich adapter, we again called upon one of the leading fluid transfer experts and supplied all of out kits with Mocal Sandwich adapters, available in both Thermostatic and Non-Thermostatic variations.
Kits include all of the necessary mounting hardware, fasteners, brackets and necessary installation manual*.

Kit prices start at $398.00 plus shipping.

You may find the Z1 Motorsports Oil Cooler Kit on our website here:
Z1 Motorsports 370Z Oil Cooler Kit

[Dustin@Z1]

After much success with the original design, we have now upgraded/revised the Z1 Motorsports 370Z Oil Cooler Kit to now include all Mocal products. As an added benefit, we are also offering these kits with NEW LOWER PRICES!

The Base (19 row Oil Cooler Core without the Mocal Thermostatic Sandwhich Adapter plate is now $398 plus shipping.

Our most popular oil cooler configuration that offers the optimum amount of cooling and day to day streetability is our 25 Row Cooler with the Mocal Thermostatic Plate which lists for $538 plus shipping.

For Supercharged or Twin Turbo applications, our 34 row oil cooler kit is a MUST! With the temperatures already an issue on 370Z's that are pushed to the limit in stock trim, the added heat generated by the F/I Package only compounds the problem. Keep you oil running cool and lubricating like you and your engine needs it to! The kits start at $598 for Non-Thermostatic kits and go up to $638 for Thermostatic equipped kits.

As promised, the full instruction manual for the Z1 Oil Cooler Kit can now be pre-viewed online on our website by clicking on the link at the bottom of the Z1 Motorsports Oil Cooler Kit product page.

The Z1 Motorsports 370Z Oil Cooler kit can be found on our website here:

Z1 Motorsports 370Z Oil Cooler Kit

[bryan@Z1]

In stock and ready to ship in all core sizes!

[Zeto]

How much shipped to 07424 for the base?

[Dustin@Z1]

Zeto, PM replied to.

[afsbimmer]

Can you give me a ballpark estimate on installation of the 25 row kit for a 2009 370z coupe/sport/manual? I may have hit the wrong button on the previous post. If so.....sorry about that.

[Dustin@Z1]

We have done it again! After negotiations with our supplier, we have been able to further reduce the prices of our 25 and 34 row oil cooler kits by an additional $30 for the 25 row kit and $40 on the 34 row kit.

At the same time, we have over-hauled our installation manual with more detailed images and instructions [based on the suggestions of the the370z.com forum members].

And for the hat trick....we are now introducing a new, protective sheathing that is both form fittings are very durable. The sheathing does not add the additional bulk and weight of a heater hose and MUCH more wear resistant than plastic split loom. We are now offering this pre-installed for an additional $25.



* Please note: Actual length of the protective line sheathing will vary from the image shown.


Kits are instock and ready to ship!

To take a look at the Z1 Motorsport Oil Cooler Kits on our website, or to view any other products we offer, feel free to browse our website:

Z1 Motorsports 370z Oil Cooler Kit

Z1 Motorsports - Nissan & Infiniti Specialists

[FL 4Motion]

Nice improvements Z1! Glad to see you guys being so proactive and listening to the real world experiences/inputs of everyone on here.

[frostyrock7c]

Hi Dustin, please PM me a price for the 34 row kit with all of the upgrades, compatible with a future GTM TT kit, and Berk HFCs shipped to 31302. Thanks!

[Dustin@Z1]

PM's replied to! Thank you everyone!

[flashburn]

Just wondering, but why doesn't the sheathing cover the entire line?

Also, I PM'ed you about some stuff (although you just answered one of them in this thread ).


edit: I just saw the note about the sheathing, that it will vary in length. Does that mean we can expect it to cover the entire line then?

[Dustin@Z1]

To cover the entire line would add additional cost. In order to keep the prices as low as possible [and prevent "sticker shock"], we have opted to only cover the portion of the line that will come close to contacting the chassis.

If you like, I can quote you a price to cover the entire line and build a line set specifically for your Z.

[Dustin@Z1]

As promised, here is the newly revised Z1 Motorsports 370z Oil Cooler Kit Installation Manual. I have done a complete evaluation of the kit and have made a few critiques, making the manual much more comprehensive. Now totaling 15 pages, I feel that our installation manual is one of the best on the market

Z1 Motorsports 370z Installation Manual - PDF Doc

Also, some of the coloring on the image will look odd when viewing it in color as shown on the PDF. This is done so that it is visible when printing with a basic Black and White Laser Jet Printer.

[Dustin@Z1]

We will be giving away a 25 row oil cooler kit with a non-thermostatic sandwich plate at the 2010 Z Nationals event.

* If you win and wish to upgrade to the Thermostatic sandwich plate and/or the 34 row oil cooler. You will only have to pay the difference.

[TrackRat]

Are there any fitment issues with the larger 34 row cooler core?