Motion Lab has the engine components, forced induction kits, and clutches you need!!

Motion Lab

It's Monday May 20th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.


Cusco LSD - Type RS: The Cusco Type RS LSD had proved to be capable of competition use in the All Japan Gymkhana Championship without overhauling a single time during the season. With all drivers and teams finishing with good or championship results at the end of the season. According to Cusco's in house research, initial torque is 50 to 70% lower compared to the conventional cone plate type LSD enabling lower drive friction and better response.

• Low power loss means better lap times for even the mild tuned of cars
• Chattering is kept low
• Improved durability as clutch plates are low pressured
• The LSD efficiency is higher with smoother oil flow between plates.
• Special precision springs, set in the pressure plate, assure steady coil movement
• Clutch plates do not stick together like conventional cone plate type LSDs. Therefore less clutch plate wear or deterioration occurs.

There are three ways to set your Cusco Limited Slip Differentials: 1 way, 1.5 way and 2 way.

• 1 way LSD: Specially suited for front wheel drive cars and AWD front axle cars. Activates under acceleration, and acts as a true LSD when the throttle is off. This CUSCO 1 way LSD will improve lap times without a doubt.
• 1.5 way LSD: Activates under acceleration while the under-steer under deceleration is less than on a 2 way LSD. Recommended for those who have a hard time with under-steer.
• 2 way LSD: Recommended on rear wheel drive cars and AWD rear axle cars. Activates on both acceleration and deceleration. Recommended for those who prefer aggressive driving and big angle drifting.

Okada Projects Plasma Direct: A revolution in ignition technology!! The Plasma Direct is the ignition coil with a high power amplifier built in to it. The Plasma Directs produce 4 times more spark energy than stock coils and also generate an ultra fast multi spark discharge of 10 sparks up to highest RPM. The spark amperage is increased 100%, allowing the spark to reach many more molecules and therefore accelerate the ignition and combustion process. This is extremely important in forced induction applications but also improves the performance of normally aspirated engines. The Plasma Direct will increase horsepower and torque throughout the entire rpm range. This upgrade will also reduce fuel consumption. Even the engines with a legendary smoothness will be further refined with the Plasma Direct upgrade. Our Plasma Directs are OBD II compliant. Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils and ready to go! Plasma Direct is made to a specific application.

Highlights:

• 100% secondary current (Spark Amperage) increase
• 4 Times Spark Energy Increase for the initial spark discharge
• Easy installation. Only replace stock coils to Plasma Direct
• Compatible with all OEM components
• Compatible with OBD-II (On-Board-Diagnostics)

PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It's Tuesday May 21st and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.


GTM 70MM Competition Radiator with heat exchanger: GTM is proud to offer an aluminum racing radiator for the 370Z/G37 powered by the VQ37VHR motor. Because the stock engine is capable of supporting more horsepower than its predecessor, the cooling system needs to be addressed when making substantially more power than stock. The GTM 70mm radiator is capable of dissipating more heat as well as having a higher capacity for coolant. This allows high horsepower cars to compete in endurance racing on a road course where the stock radiator would be overloaded. On extreme power cars (1,000bhp+) dedicated to drag racing, the extra capacity of the racing radiator enables the car to store additional heat that can be dissipated as the car is returning from a pass.

These radiators are made 100% made in the USA using manufacturing processes to reduce waste, increase repeatability in manufacturing, increase efficiency in production, and most important of all, increase quality. This means that the fit and finish of GTM’s aluminum racing radiators is second to none. Each weld is show quality and the components are protected throughout the manufacturing process to ensure a mar free finish.

Because the factory radiator is permanently attached to the A/C condenser, all GTM Aluminum Racing Radiators come with a new A/C condenser to replace the stock one.

This radiator has provisions for an Automatic car with the internal heat exchanger. Because water is an excellent conductor of heat, the internal heat exchanger dissipates vastly more heat than the stock heat exchanger (even with an auxiliary aftermarket transmission cooler!!). If you have an automatic car with forced induction, this is the last transmission cooler you'll ever need.



GTM VQ37VHR EXTREME DUTY PISTONS SET 370Z/G37: Arias®/GTM® Extreme Duty Pistons are made from zero-silicon aluminum forging, and are designed to have the highest heat and deformation resistance. They utilize buttons instead of spring locks, providing additional support. These GTM® pistons are the first to integrate a gas expansion groove between the two ring grooves, allowing additional small, yet critical, volume for gas expansion. The piston also incorporates a slightly taller than usual design, with longer skirts to minimize movement and vibration.

Sold in set of 6 pistons. Rings, Buttons, and Pins are all included.



PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It's Wednesday May 22nd and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.


GTM 70MM Competition Radiator with heat exchanger: GTM is proud to offer an aluminum racing radiator for the 370Z/G37 powered by the VQ37VHR motor. Because the stock engine is capable of supporting more horsepower than its predecessor, the cooling system needs to be addressed when making substantially more power than stock. The GTM 70mm radiator is capable of dissipating more heat as well as having a higher capacity for coolant. This allows high horsepower cars to compete in endurance racing on a road course where the stock radiator would be overloaded. On extreme power cars (1,000bhp+) dedicated to drag racing, the extra capacity of the racing radiator enables the car to store additional heat that can be dissipated as the car is returning from a pass.

These radiators are made 100% made in the USA using manufacturing processes to reduce waste, increase repeatability in manufacturing, increase efficiency in production, and most important of all, increase quality. This means that the fit and finish of GTM’s aluminum racing radiators is second to none. Each weld is show quality and the components are protected throughout the manufacturing process to ensure a mar free finish.

Because the factory radiator is permanently attached to the A/C condenser, all GTM Aluminum Racing Radiators come with a new A/C condenser to replace the stock one.

This radiator has provisions for an Automatic car with the internal heat exchanger. Because water is an excellent conductor of heat, the internal heat exchanger dissipates vastly more heat than the stock heat exchanger (even with an auxiliary aftermarket transmission cooler!!). If you have an automatic car with forced induction, this is the last transmission cooler you'll ever need.



GTM VQ37VHR EXTREME DUTY PISTONS SET 370Z/G37: Arias®/GTM® Extreme Duty Pistons are made from zero-silicon aluminum forging, and are designed to have the highest heat and deformation resistance. They utilize buttons instead of spring locks, providing additional support. These GTM® pistons are the first to integrate a gas expansion groove between the two ring grooves, allowing additional small, yet critical, volume for gas expansion. The piston also incorporates a slightly taller than usual design, with longer skirts to minimize movement and vibration.

Sold in set of 6 pistons. Rings, Buttons, and Pins are all included.



PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It's Thursday May 23rd and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.


GTM 70MM Competition Radiator with heat exchanger: GTM is proud to offer an aluminum racing radiator for the 370Z/G37 powered by the VQ37VHR motor. Because the stock engine is capable of supporting more horsepower than its predecessor, the cooling system needs to be addressed when making substantially more power than stock. The GTM 70mm radiator is capable of dissipating more heat as well as having a higher capacity for coolant. This allows high horsepower cars to compete in endurance racing on a road course where the stock radiator would be overloaded. On extreme power cars (1,000bhp+) dedicated to drag racing, the extra capacity of the racing radiator enables the car to store additional heat that can be dissipated as the car is returning from a pass.

These radiators are made 100% made in the USA using manufacturing processes to reduce waste, increase repeatability in manufacturing, increase efficiency in production, and most important of all, increase quality. This means that the fit and finish of GTM’s aluminum racing radiators is second to none. Each weld is show quality and the components are protected throughout the manufacturing process to ensure a mar free finish.

Because the factory radiator is permanently attached to the A/C condenser, all GTM Aluminum Racing Radiators come with a new A/C condenser to replace the stock one.

This radiator has provisions for an Automatic car with the internal heat exchanger. Because water is an excellent conductor of heat, the internal heat exchanger dissipates vastly more heat than the stock heat exchanger (even with an auxiliary aftermarket transmission cooler!!). If you have an automatic car with forced induction, this is the last transmission cooler you'll ever need.



GTM VQ37VHR EXTREME DUTY PISTONS SET 370Z/G37: Arias®/GTM® Extreme Duty Pistons are made from zero-silicon aluminum forging, and are designed to have the highest heat and deformation resistance. They utilize buttons instead of spring locks, providing additional support. These GTM® pistons are the first to integrate a gas expansion groove between the two ring grooves, allowing additional small, yet critical, volume for gas expansion. The piston also incorporates a slightly taller than usual design, with longer skirts to minimize movement and vibration.

Sold in set of 6 pistons. Rings, Buttons, and Pins are all included.



PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It's Friday May 24th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.


GTM 70MM Competition Radiator with heat exchanger: GTM is proud to offer an aluminum racing radiator for the 370Z/G37 powered by the VQ37VHR motor. Because the stock engine is capable of supporting more horsepower than its predecessor, the cooling system needs to be addressed when making substantially more power than stock. The GTM 70mm radiator is capable of dissipating more heat as well as having a higher capacity for coolant. This allows high horsepower cars to compete in endurance racing on a road course where the stock radiator would be overloaded. On extreme power cars (1,000bhp+) dedicated to drag racing, the extra capacity of the racing radiator enables the car to store additional heat that can be dissipated as the car is returning from a pass.

These radiators are made 100% made in the USA using manufacturing processes to reduce waste, increase repeatability in manufacturing, increase efficiency in production, and most important of all, increase quality. This means that the fit and finish of GTM’s aluminum racing radiators is second to none. Each weld is show quality and the components are protected throughout the manufacturing process to ensure a mar free finish.

Because the factory radiator is permanently attached to the A/C condenser, all GTM Aluminum Racing Radiators come with a new A/C condenser to replace the stock one.

This radiator has provisions for an Automatic car with the internal heat exchanger. Because water is an excellent conductor of heat, the internal heat exchanger dissipates vastly more heat than the stock heat exchanger (even with an auxiliary aftermarket transmission cooler!!). If you have an automatic car with forced induction, this is the last transmission cooler you'll ever need.



GTM VQ37VHR EXTREME DUTY PISTONS SET 370Z/G37: Arias®/GTM® Extreme Duty Pistons are made from zero-silicon aluminum forging, and are designed to have the highest heat and deformation resistance. They utilize buttons instead of spring locks, providing additional support. These GTM® pistons are the first to integrate a gas expansion groove between the two ring grooves, allowing additional small, yet critical, volume for gas expansion. The piston also incorporates a slightly taller than usual design, with longer skirts to minimize movement and vibration.

Sold in set of 6 pistons. Rings, Buttons, and Pins are all included.



PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It's Saturday May 25th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.

Injector Dynamics ID725 Injectors: The ID725 exists for all those applications where the ID1000 is just a little bit too big.
The ID725 will maintain strict linearity at flow rates that will satisfy idle and cruise requirements for even the smallest engines. This makes the ID725 ideal for emissions compliant OEM applications while offering the high flow rates required for mildly boosted motors.

With pressure capability in excess of 8 bar this injector has found a home in many different applications.

From upgrade injectors on V8's running factory Ford or GM ECU's, to OEM supply on everything from emissions legal turbo kits to Noble's new 650hp M600, the ID725 is holding its own with the ID1000 and ID2000 which have achieved near cult status in the aftermarket tuning industry.



STILLEN 500+HP VQ37 Supercharger System: STILLEN is proud to offer the STILLEN supercharger system for the Nissan and Infiniti VQ37 (370Z/G37.) This supercharger system took over a year to develop and involves some revolutionary designs. This supercharger system is developed to offer the customer easy upgradability and installation without requiring a hood replacement to complete the installation! With this supercharger system we bump the power output to over 500 horsepower!

Vortech V3 supercharger: This supercharger system incorporates the Vortech V3 self-lubricating supercharger system. With a completely sealed supercharger system there is no concern of having to run additional oil lines or anything like that. Also, the V3 supercharger is a much quieter system than previous models. The major features to the Vortech supercharger are the ease of upgrading power later on, as well as the installation without having to modify the hood!


PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It's Tuesday May 28th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.

Injector Dynamics ID725 Injectors: The ID725 exists for all those applications where the ID1000 is just a little bit too big.
The ID725 will maintain strict linearity at flow rates that will satisfy idle and cruise requirements for even the smallest engines. This makes the ID725 ideal for emissions compliant OEM applications while offering the high flow rates required for mildly boosted motors.

With pressure capability in excess of 8 bar this injector has found a home in many different applications.

From upgrade injectors on V8's running factory Ford or GM ECU's, to OEM supply on everything from emissions legal turbo kits to Noble's new 650hp M600, the ID725 is holding its own with the ID1000 and ID2000 which have achieved near cult status in the aftermarket tuning industry.



STILLEN 500+HP VQ37 Supercharger System: STILLEN is proud to offer the STILLEN supercharger system for the Nissan and Infiniti VQ37 (370Z/G37.) This supercharger system took over a year to develop and involves some revolutionary designs. This supercharger system is developed to offer the customer easy upgradability and installation without requiring a hood replacement to complete the installation! With this supercharger system we bump the power output to over 500 horsepower!

Vortech V3 supercharger: This supercharger system incorporates the Vortech V3 self-lubricating supercharger system. With a completely sealed supercharger system there is no concern of having to run additional oil lines or anything like that. Also, the V3 supercharger is a much quieter system than previous models. The major features to the Vortech supercharger are the ease of upgrading power later on, as well as the installation without having to modify the hood!


PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It's Wednesday, May 29th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.


GReddy Turbo Kit - Tuner: New for ’09 is the GReddy line of Tuner Turbo Kits. These stage 2 turbo kits feature main ingredients for big horsepower, larger turbochargers, intercoolers and racing downpipes. But they also keep cost down by leaving fuel upgrades up to the individual tuner, so depending on how extreme they want to go, the tuner has more options for tuning (Optional pre-programmed Ultimate kits will also be available for do it yourselfers.) These Tuner Kits retain GReddy’s exceptional fitment, construction and quality, while supplying trick pieces like external wastegate dump-pipes and a high-capacity cast oil pan for the HR-350Z twin TD06-20G kit


Carrillo Connecting Rods: Carrillo Connecting Rods are manufactured from a proprietary steel, manufactured and forged to custom specifications. After experimenting with virtually every other reasonable material, Carrillo found a chromium/nickel/vanadium/molybdenum-forged alloy to be the best product to meet the stringent requirements of performance motors. Through out the manufacturing process Carrillo rods are inspected and measured to uphold high quality standards. When you go with Carrillo - you go with quality.


Rods sold as a *COMPLETE* Matched Set.




PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It's Thursday, May 30th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.


GReddy Turbo Kit - Tuner: New for ’09 is the GReddy line of Tuner Turbo Kits. These stage 2 turbo kits feature main ingredients for big horsepower, larger turbochargers, intercoolers and racing downpipes. But they also keep cost down by leaving fuel upgrades up to the individual tuner, so depending on how extreme they want to go, the tuner has more options for tuning (Optional pre-programmed Ultimate kits will also be available for do it yourselfers.) These Tuner Kits retain GReddy’s exceptional fitment, construction and quality, while supplying trick pieces like external wastegate dump-pipes and a high-capacity cast oil pan for the HR-350Z twin TD06-20G kit


Carrillo Connecting Rods: Carrillo Connecting Rods are manufactured from a proprietary steel, manufactured and forged to custom specifications. After experimenting with virtually every other reasonable material, Carrillo found a chromium/nickel/vanadium/molybdenum-forged alloy to be the best product to meet the stringent requirements of performance motors. Through out the manufacturing process Carrillo rods are inspected and measured to uphold high quality standards. When you go with Carrillo - you go with quality.


Rods sold as a *COMPLETE* Matched Set.




PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It's Friday, May 31st and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.


GReddy Turbo Kit - Tuner: New for ’09 is the GReddy line of Tuner Turbo Kits. These stage 2 turbo kits feature main ingredients for big horsepower, larger turbochargers, intercoolers and racing downpipes. But they also keep cost down by leaving fuel upgrades up to the individual tuner, so depending on how extreme they want to go, the tuner has more options for tuning (Optional pre-programmed Ultimate kits will also be available for do it yourselfers.) These Tuner Kits retain GReddy’s exceptional fitment, construction and quality, while supplying trick pieces like external wastegate dump-pipes and a high-capacity cast oil pan for the HR-350Z twin TD06-20G kit


Carrillo Connecting Rods: Carrillo Connecting Rods are manufactured from a proprietary steel, manufactured and forged to custom specifications. After experimenting with virtually every other reasonable material, Carrillo found a chromium/nickel/vanadium/molybdenum-forged alloy to be the best product to meet the stringent requirements of performance motors. Through out the manufacturing process Carrillo rods are inspected and measured to uphold high quality standards. When you go with Carrillo - you go with quality.


Rods sold as a *COMPLETE* Matched Set.




PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It's Tuesday, June 4th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.


GReddy Turbo Kit - Tuner: New for ’09 is the GReddy line of Tuner Turbo Kits. These stage 2 turbo kits feature main ingredients for big horsepower, larger turbochargers, intercoolers and racing downpipes. But they also keep cost down by leaving fuel upgrades up to the individual tuner, so depending on how extreme they want to go, the tuner has more options for tuning (Optional pre-programmed Ultimate kits will also be available for do it yourselfers.) These Tuner Kits retain GReddy’s exceptional fitment, construction and quality, while supplying trick pieces like external wastegate dump-pipes and a high-capacity cast oil pan for the HR-350Z twin TD06-20G kit


Carrillo Connecting Rods: Carrillo Connecting Rods are manufactured from a proprietary steel, manufactured and forged to custom specifications. After experimenting with virtually every other reasonable material, Carrillo found a chromium/nickel/vanadium/molybdenum-forged alloy to be the best product to meet the stringent requirements of performance motors. Through out the manufacturing process Carrillo rods are inspected and measured to uphold high quality standards. When you go with Carrillo - you go with quality.


Rods sold as a *COMPLETE* Matched Set.




PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It's Wednesday, June 5th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.


GReddy Turbo Kit - Tuner: New for ’09 is the GReddy line of Tuner Turbo Kits. These stage 2 turbo kits feature main ingredients for big horsepower, larger turbochargers, intercoolers and racing downpipes. But they also keep cost down by leaving fuel upgrades up to the individual tuner, so depending on how extreme they want to go, the tuner has more options for tuning (Optional pre-programmed Ultimate kits will also be available for do it yourselfers.) These Tuner Kits retain GReddy’s exceptional fitment, construction and quality, while supplying trick pieces like external wastegate dump-pipes and a high-capacity cast oil pan for the HR-350Z twin TD06-20G kit


Carrillo Connecting Rods: Carrillo Connecting Rods are manufactured from a proprietary steel, manufactured and forged to custom specifications. After experimenting with virtually every other reasonable material, Carrillo found a chromium/nickel/vanadium/molybdenum-forged alloy to be the best product to meet the stringent requirements of performance motors. Through out the manufacturing process Carrillo rods are inspected and measured to uphold high quality standards. When you go with Carrillo - you go with quality.


Rods sold as a *COMPLETE* Matched Set.




PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It's Thursday June 6th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.


GTM 4.2 L STROKER KIT-FOR THE VQ35HR & VQ37VHR: Specifications:

• GT Motorsports® Hi-Rev Crank: 96 mm stroke
• GT Motorsports®-spec Arias®/Wiseco® Stage II FI pistons
• GT Motorsports® Rods
• Bore: 96mm (optionally 100mm bore with Darton MID sleeves)
• Final Displacement (exact): 4.2 L

Background
Our stroker upgrade represented the pinnacle of engineering for the VQ35DE platform. From our own internal testing, the components performed flawlessly. The very first GTM 2006 Nissan 350z that received this build achieved 855whp (DJ) at 22psi. See it here. After the first 3000 miles, that engine was removed and completely disassembled for an extremely thorough inspection. There were no issues found whatsoever, and the engine was reassembled. However, we thought of ways of further advancement of the VQ35DE platform, with considerably more demanding road race applications in mind. We present those improvements, and the advantages of the said configuration here.


STILLEN Power Steering Cooler Kit: STILLEN designed this Heavy Duty Steering Fluid Cooler to handle driving habits ranging from casual cruising to extreme canyon running. If you are auto-crossing, doing some extreme driving, or have swapped your wheels & tires for a wider and larger diameter set, you are taxing your stock steering fluid cooler and risking the chance of boil-over or cooking the fluid.

The differences between the stock steering Fluid Cooler and the New STILLEN unit are capacity and volume. The reservoir for the STILLEN unit is larger which eliminates the chance of boil-over. The lines are also larger in diameter, allowing more volume through the steering system.




PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It's Saturday June 8th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.


GTM 4.2 L STROKER KIT-FOR THE VQ35HR & VQ37VHR: Specifications:

• GT Motorsports® Hi-Rev Crank: 96 mm stroke
• GT Motorsports®-spec Arias®/Wiseco® Stage II FI pistons
• GT Motorsports® Rods
• Bore: 96mm (optionally 100mm bore with Darton MID sleeves)
• Final Displacement (exact): 4.2 L

Background
Our stroker upgrade represented the pinnacle of engineering for the VQ35DE platform. From our own internal testing, the components performed flawlessly. The very first GTM 2006 Nissan 350z that received this build achieved 855whp (DJ) at 22psi. See it here. After the first 3000 miles, that engine was removed and completely disassembled for an extremely thorough inspection. There were no issues found whatsoever, and the engine was reassembled. However, we thought of ways of further advancement of the VQ35DE platform, with considerably more demanding road race applications in mind. We present those improvements, and the advantages of the said configuration here.


STILLEN Power Steering Cooler Kit: STILLEN designed this Heavy Duty Steering Fluid Cooler to handle driving habits ranging from casual cruising to extreme canyon running. If you are auto-crossing, doing some extreme driving, or have swapped your wheels & tires for a wider and larger diameter set, you are taxing your stock steering fluid cooler and risking the chance of boil-over or cooking the fluid.

The differences between the stock steering Fluid Cooler and the New STILLEN unit are capacity and volume. The reservoir for the STILLEN unit is larger which eliminates the chance of boil-over. The lines are also larger in diameter, allowing more volume through the steering system.




PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It's Tuesday June 11th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.


GTM 4.2 L STROKER KIT-FOR THE VQ35HR & VQ37VHR: Specifications:

• GT Motorsports® Hi-Rev Crank: 96 mm stroke
• GT Motorsports®-spec Arias®/Wiseco® Stage II FI pistons
• GT Motorsports® Rods
• Bore: 96mm (optionally 100mm bore with Darton MID sleeves)
• Final Displacement (exact): 4.2 L

Background
Our stroker upgrade represented the pinnacle of engineering for the VQ35DE platform. From our own internal testing, the components performed flawlessly. The very first GTM 2006 Nissan 350z that received this build achieved 855whp (DJ) at 22psi. See it here. After the first 3000 miles, that engine was removed and completely disassembled for an extremely thorough inspection. There were no issues found whatsoever, and the engine was reassembled. However, we thought of ways of further advancement of the VQ35DE platform, with considerably more demanding road race applications in mind. We present those improvements, and the advantages of the said configuration here.


STILLEN Power Steering Cooler Kit: STILLEN designed this Heavy Duty Steering Fluid Cooler to handle driving habits ranging from casual cruising to extreme canyon running. If you are auto-crossing, doing some extreme driving, or have swapped your wheels & tires for a wider and larger diameter set, you are taxing your stock steering fluid cooler and risking the chance of boil-over or cooking the fluid.

The differences between the stock steering Fluid Cooler and the New STILLEN unit are capacity and volume. The reservoir for the STILLEN unit is larger which eliminates the chance of boil-over. The lines are also larger in diameter, allowing more volume through the steering system.




PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance