RJM Clutch Pedal System for 370Z - Fully Customizable Clutch Feel & Stroke

Ryan @ RJM · 11-30-2013, 12:10 PM

Quote:

Originally Posted by Meulen

Got mine delivered last week! This thing is gorgeous! It's winter here, so even if I install it I can't try it out yet. But, I can't wait to get this thing installed!

Meulen I'm glad to see it arrived safely and you're happy with my workman ship
I personally fabricate, paint, assembly and inspect every unit that goes out to ensure the highest quality possible. They're built in small qty's, laser cut from high grade steel and assembled with hardware made in the USA... I think the care and attention to detail that goes into every unit truely shows in the final product and I wouldn't put my name on anything less.
I'll look forward to hearing how you like it once you get your build buttoned up and the weather co-operates. We got just over 3ft of snow dumped here in the past 4 days so I know the feeling... this is 4x4 power sliding weather
__________________________________________________

martin82 · 11-30-2013, 01:27 PM

Is there still special pricing on this if so pm me thanks!!

Ryan @ RJM · 12-01-2013, 08:26 AM

Quote:

Originally Posted by martin82

Is there still special pricing on this if so pm me thanks!!

PM sent Last night as requested

Still a Few Units Left !

40 to 332 · 12-01-2013, 12:53 PM

Hey Ryan … I ordered the RJM clutch pedal assembly and installed it a few months ago. I meant to post some comments about it after some use, but never found the time. The car is now in winter hibernation, and I now have some time. My comments are:

First, the RJM assembly is well made. The overall quality matches or exceeds that of the stock assembly.

Second, the RJM assembly is far superior to the stock in terms of overall clutch "feel". The clutch shudder that I often experienced from a standing start with the stock assembly has virtually disappeared. It makes the driving experience better. (Incidentally, I have been driving vehicles with manual transmissions for 45 years so the "shudder" experienced with the stock assembly was not a newbie issue).

Third, the free play at the top of the pedal takes a bit of time to get used to largely because there is virtually no free play in the stock pedal, so the sensation is different. I completed the minor adjustment outlined in the instructions which reduced the free play a bit, but caused the lower switch to start heading out of alignment. Anyway, not a problem … just letting others know that the free play may seem a little odd at first.

Fourth, the RJM assembly is a bit of a bear to install, due largely to the very cramped quarters. Certainly, you don't have to be a master mechanic to install it, but youth and a good back would help! It took me about 6 hours to install, but I was very fussy about following the instructions, and making sure that fitment was proper. It also requires good lighting … preferably with something other than a trouble light that I used, and regretted every time my hands or arms got close to it.

Finally, I'd offer an "alert" for Step 37 … when you install the smaller clevis pin into the supplied clevis fork through the AFP slider mechanism. At this stage, the installation is almost complete. I had to "fuss" with the pin while attempting to push it through … and suddenly it went through, at which time I heard a faint dreaded clink, which turned out to be the rear bronze bearing in the new fork that had popped out and struck some part in the footwell as it went flying. There was some momentary fear as I thought "where the f did the bearing end up". Fortunately, a quick search revealed it deep in a crevice in the footwell. It was easy to re-install, but I could have done without the panic just as the installation was nearing completion. You may want to alert folks of this issue. Simply placing a finger on the backside of the fork to ensure that the bearing stays in place would solve the problem.

Bottom line: The RJM assembly is great. I never went the way of removing or changing the clutch helper spring so I can't comment on whether the assembly helps more or less than switching the spring. But I can say that the assembly works well and makes driving a stick a much better experience than the stock assembly.

JARblue · 01-09-2014, 07:13 PM

One of these just showed up unexpectedly on my doorstep today! Thanks to Ryan and my wife for the birthday present!

I can't wait until I'm done installing it

Ryan @ RJM · 01-11-2014, 03:54 PM

Quote:

Originally Posted by JARblue

One of these just showed up unexpectedly on my doorstep today! Thanks to Ryan and my wife for the birthday present!

I can't wait until I'm done installing it

JARblue You're very welcome & Happy Birthday!
I'll look forward to hearing how you like it.

zguynate · 01-27-2014, 10:46 AM

I didnt realize that my issue was posted here about the water leak. Just for the record my water leak was leaking through the wiring harness boot that is just to the left of the clutch pedal assembly. My water leak started coincidentally shortly after I installed the RJM pedal causing me to think that it may have been related. I can safely say that the issue wasnt caused or related to this assembly. It was just one of those weird things that happen. A little silicon around the harness boot fixed me up!

This pedal assembly is awesome! No complaints here. Definitely worth the money. One of my biggest complaints when switching from the 350z to the 370z was the clutch feel joined with the lagging of the throttle. This fixed any concerns I had with the clutch being hard to feel/judge. Before it seemed that I could never get it right. I was too high or too low causing the ride to feel like a 14 year old was driving a stick for the first time lol.

Ryan @ RJM · 02-05-2014, 06:53 PM

Quote:

Originally Posted by dragonbreath

I didnt realize that my issue was posted here about the water leak. Just for the record my water leak was leaking through the wiring harness boot that is just to the left of the clutch pedal assembly. My water leak started coincidentally shortly after I installed the RJM pedal causing me to think that it may have been related. I can safely say that the issue wasnt caused or related to this assembly. It was just one of those weird things that happen. A little silicon around the harness boot fixed me up!

This pedal assembly is awesome! No complaints here. Definitely worth the money. One of my biggest complaints when switching from the 350z to the 370z was the clutch feel joined with the lagging of the throttle. This fixed any concerns I had with the clutch being hard to feel/judge. Before it seemed that I could never get it right. I was too high or too low causing the ride to feel like a 14 year old was driving a stick for the first time lol.

Dragonbreath, thanks for following up and I'm glad to hear your enjoying the new pedal. As well it's good you got that water leak fixed around your upper wiring harness. Looking at the pics in your other thread it certainly was a pretty extreme amount of water that found its way into your car

Ryan @ RJM · 02-05-2014, 06:58 PM

370Z Rev2.1 AFP Pedal Assemblies are Still On Sale this Month (While Supplies Last)
Just *5* Units Remaining in stock tonight at the Sale Price & with Free Shipping.

Ryan @ RJM · 02-07-2014, 04:09 PM

Down to 3 Units Left this Weekend at the Sale Price. Who Wants One

Ryan @ RJM · 02-09-2014, 08:27 AM

Orders before noon today will ship tomorrow AM

Shotta · 02-19-2014, 07:54 PM

Hello Ryan,

for this Redline/Synchromesh fluid cocktail you mention, are you just mixing 50/50 or some other ratio?

Thanks.

Ryan @ RJM · 02-19-2014, 11:03 PM

Quote:

Originally Posted by Shotta

Hello Ryan,

for this Redline/Synchromesh fluid cocktail you mention, are you just mixing 50/50 or some other ratio?

Thanks.

Shotta, the mix I found works best for my G37S in summer is:

(1) Bottle RL MTL (75W90)
(1) Bottle RL MT90
(1) Bottle Amsoil Synthetic Synchromesh

Winter mix (before I got a truck lol) was:
(2) Bottles RL MTL (75W90)
(1) Bottle Amsoil Syntetic Synchromesh

The Amsoil can be subbed for the cheaper Penzoil synchromesh fluid with no dicernable difference in hot/cold shift feel but I prefer to keep it all synthetic.

Ryan @ RJM · 02-22-2014, 03:51 PM

Just received parts to fabricate 10 additional 370Z Rev2.1 AFP Pedal units yesterday

February Sale is still on with these units marked down to $235 with Free Shipping included. Can be purchased directly from the RJM webstore and orders received by noon tomorrow will ship first thing Monday morning.

Ryan @ RJM · 03-01-2014, 10:29 AM

LAST 2 DAYS for Sale Pricing!
$235 + Free Shipping
Down to Only QTY * 4 * Left in Stock Today.
Sale Ends This Sunday Night - OR- Once Stock Runs Out!
These will be returning to regular pricing of $249.99+ International S&H Monday.

12-01-2013, 12:53 PM	#184 (permalink)
40 to 332 Enthusiast Member Join Date: Apr 2013 Location: Kimberley, BC, CANADA Posts: 447 Drives: 13 370Z BS M6 Sport Rep Power: 439	Hey Ryan … I ordered the RJM clutch pedal assembly and installed it a few months ago. I meant to post some comments about it after some use, but never found the time. The car is now in winter hibernation, and I now have some time. My comments are: First, the RJM assembly is well made. The overall quality matches or exceeds that of the stock assembly. Second, the RJM assembly is far superior to the stock in terms of overall clutch "feel". The clutch shudder that I often experienced from a standing start with the stock assembly has virtually disappeared. It makes the driving experience better. (Incidentally, I have been driving vehicles with manual transmissions for 45 years so the "shudder" experienced with the stock assembly was not a newbie issue). Third, the free play at the top of the pedal takes a bit of time to get used to largely because there is virtually no free play in the stock pedal, so the sensation is different. I completed the minor adjustment outlined in the instructions which reduced the free play a bit, but caused the lower switch to start heading out of alignment. Anyway, not a problem … just letting others know that the free play may seem a little odd at first. Fourth, the RJM assembly is a bit of a bear to install, due largely to the very cramped quarters. Certainly, you don't have to be a master mechanic to install it, but youth and a good back would help! It took me about 6 hours to install, but I was very fussy about following the instructions, and making sure that fitment was proper. It also requires good lighting … preferably with something other than a trouble light that I used, and regretted every time my hands or arms got close to it. Finally, I'd offer an "alert" for Step 37 … when you install the smaller clevis pin into the supplied clevis fork through the AFP slider mechanism. At this stage, the installation is almost complete. I had to "fuss" with the pin while attempting to push it through … and suddenly it went through, at which time I heard a faint dreaded clink, which turned out to be the rear bronze bearing in the new fork that had popped out and struck some part in the footwell as it went flying. There was some momentary fear as I thought "where the f did the bearing end up". Fortunately, a quick search revealed it deep in a crevice in the footwell. It was easy to re-install, but I could have done without the panic just as the installation was nearing completion. You may want to alert folks of this issue. Simply placing a finger on the backside of the fork to ensure that the bearing stays in place would solve the problem. Bottom line: The RJM assembly is great. I never went the way of removing or changing the clutch helper spring so I can't comment on whether the assembly helps more or less than switching the spring. But I can say that the assembly works well and makes driving a stick a much better experience than the stock assembly. BeemaaZ likes this.

01-09-2014, 07:13 PM	#185 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	One of these just showed up unexpectedly on my doorstep today! Thanks to Ryan and my wife for the birthday present! I can't wait until I'm done installing it TreeSemdyZee and GaleForce like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

01-27-2014, 10:46 AM	#187 (permalink)
zguynate A True Z Fanatic Join Date: Jan 2012 Location: Strangeland Posts: 1,054 Drives: 09 370z Rep Power: 73	I didnt realize that my issue was posted here about the water leak. Just for the record my water leak was leaking through the wiring harness boot that is just to the left of the clutch pedal assembly. My water leak started coincidentally shortly after I installed the RJM pedal causing me to think that it may have been related. I can safely say that the issue wasnt caused or related to this assembly. It was just one of those weird things that happen. A little silicon around the harness boot fixed me up! This pedal assembly is awesome! No complaints here. Definitely worth the money. One of my biggest complaints when switching from the 350z to the 370z was the clutch feel joined with the lagging of the throttle. This fixed any concerns I had with the clutch being hard to feel/judge. Before it seemed that I could never get it right. I was too high or too low causing the ride to feel like a 14 year old was driving a stick for the first time lol. __________________ 2009 370z touring w/sports package

02-05-2014, 06:58 PM	#189 (permalink)
Ryan @ RJM Enthusiast Member Join Date: Aug 2012 Location: Ontario Canada Posts: 345 Drives: 09' G37S Coupe Rep Power: 13	370Z Rev2.1 AFP Pedal Assemblies are Still On Sale this Month (While Supplies Last) Just 5 Units Remaining in stock tonight at the Sale Price & with Free Shipping. __________________ Home of the A.F.P. Upgraded Clutch Pedal System. Smoother Launches, Smoother Shifts & Improved Clutch Control Like No Other Pedal Mod You've Experianced Before Guaranteed! Visit www.RJMPerformance.com or Email Ryan@RJMPerformance.com Also Don't Forget to Like us on Facebook www.facebook.com/RJM-Performance

02-07-2014, 04:09 PM	#190 (permalink)
Ryan @ RJM Enthusiast Member Join Date: Aug 2012 Location: Ontario Canada Posts: 345 Drives: 09' G37S Coupe Rep Power: 13	Down to 3 Units Left this Weekend at the Sale Price. Who Wants One __________________ Home of the A.F.P. Upgraded Clutch Pedal System. Smoother Launches, Smoother Shifts & Improved Clutch Control Like No Other Pedal Mod You've Experianced Before Guaranteed! Visit www.RJMPerformance.com or Email Ryan@RJMPerformance.com Also Don't Forget to Like us on Facebook www.facebook.com/RJM-Performance

11-30-2013, 01:27 PM	#182 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 19	Is there still special pricing on this if so pm me thanks!!

02-09-2014, 08:27 AM	#191 (permalink)
Ryan @ RJM Enthusiast Member Join Date: Aug 2012 Location: Ontario Canada Posts: 345 Drives: 09' G37S Coupe Rep Power: 13	Orders before noon today will ship tomorrow AM __________________ Home of the A.F.P. Upgraded Clutch Pedal System. Smoother Launches, Smoother Shifts & Improved Clutch Control Like No Other Pedal Mod You've Experianced Before Guaranteed! Visit www.RJMPerformance.com or Email Ryan@RJMPerformance.com Also Don't Forget to Like us on Facebook www.facebook.com/RJM-Performance

02-19-2014, 07:54 PM	#192 (permalink)
Shotta Enthusiast Member Join Date: Apr 2012 Location: Niagara Posts: 316 Drives: 2010 370z black M6 Rep Power: 13	Hello Ryan, for this Redline/Synchromesh fluid cocktail you mention, are you just mixing 50/50 or some other ratio? Thanks. __________________ 6MT - designed for perfectionists 7AT - designed for enthusiasts

02-22-2014, 03:51 PM	#194 (permalink)
Ryan @ RJM Enthusiast Member Join Date: Aug 2012 Location: Ontario Canada Posts: 345 Drives: 09' G37S Coupe Rep Power: 13	Just received parts to fabricate 10 additional 370Z Rev2.1 AFP Pedal units yesterday February Sale is still on with these units marked down to $235 with Free Shipping included. Can be purchased directly from the RJM webstore and orders received by noon tomorrow will ship first thing Monday morning. __________________ Home of the A.F.P. Upgraded Clutch Pedal System. Smoother Launches, Smoother Shifts & Improved Clutch Control Like No Other Pedal Mod You've Experianced Before Guaranteed! Visit www.RJMPerformance.com or Email Ryan@RJMPerformance.com Also Don't Forget to Like us on Facebook www.facebook.com/RJM-Performance

03-01-2014, 10:29 AM	#195 (permalink)
Ryan @ RJM Enthusiast Member Join Date: Aug 2012 Location: Ontario Canada Posts: 345 Drives: 09' G37S Coupe Rep Power: 13	LAST 2 DAYS for Sale Pricing! $235 + Free Shipping *Down to Only QTY 4 * Left in Stock Today. Sale Ends This Sunday Night - OR- Once Stock Runs Out! These will be returning to regular pricing of $249.99+ International S&H Monday. __________________ Home of the A.F.P. Upgraded Clutch Pedal System. Smoother Launches, Smoother Shifts & Improved Clutch Control Like No Other Pedal Mod You've Experianced Before Guaranteed! Visit www.RJMPerformance.com or Email Ryan@RJMPerformance.com Also Don't Forget to Like us on Facebook www.facebook.com/RJM-Performance**

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch pedal too soft/no feel? Remove the helper spring!	esfourteen	Engine & Drivetrain	560	12-31-2020 12:17 PM
Review: RJM AFP Clutch Pedal System	modme	Engine & Drivetrain	217	05-18-2020 07:59 AM
Clutch pedal feel	Zboy	Engine & Drivetrain	2	08-27-2012 08:43 PM
Review: 370z RJM AFP Clutch Pedal System	cdoxp800	Engine & Drivetrain	0	08-12-2012 11:57 AM