Z1 Motorsports: 370Z/G37/R35 Urethane Motor Mounts

John@Z1 · 04-10-2012, 04:57 PM

Z1 Motorsports 370Z/G37/R35 Urethane Motor Mounts $198.00

Z1 Motorsports Urethane Motor Mount Set for all Nissan 370Z, GT-R (R35) and Infiniti G37 models. These 2 motor mounts come fully assembled and ready to install in the same manner as the original mounts. Expect these motor mounts to outlast your vehicle, however they are serviceable in the unlikely event there is ever a need to replace the urethane bushings.

Designed to fill the need for a quality, affordable, upgraded motor mount, the Z1 Motorsports Urethane Motor Mounts address the failures of OEM Nissan Motor Mounts while offering many appealing advantages. The original OEM Nissan mounts often fail because the rubber bushing is subjected to tension eventually tearing it apart. The rubber bushings in the Z1 motor mounts always work in compression, never in tension, eliminating this mode of failure. Designed in Solidworks, tested extensively on the street and track and assembled in house, the Z1 Motorsports Urethane Motor Mounts will be the last set of motor mounts your Z will ever need!

Side By Side With Factory Mounts

On The Doran RC 370Z(Race Proven) thanks takjak2

Some of the key features of the Z1 Motorsports Urethane Motor Mounts includes:

Energy Suspension Bushings - Z1 Motorsports teamed up with the industry leader in aftermarket performance suspension and drivetrain bushings to create a set of bushings that meet the demands of the 350Z and G35 in both fitment, durability and strength, and even increasing overall chassis rigidity.

Direct replacement design - Requires NO modifications whatsoever to the vehicle or engine to install.

Lower cost - Save some $$$ in comparison to the cost of alternative products on the market including the OEM Nissan replacement mounts.

Lightweight - The Z1 Motorsports Urethane Motor Mounts will shave ~ 2 lbs off of the weight of your vehicle. Every ounce counts in the racing world!

Compact design - In comparison to the OEM Nissan Motor Mounts, the Z1 Urethane Motor Mount replacements are smaller in size allowing for increased access around the engine mounts to such components as the A/C Compressor, brackets and turbo chargers.

Height adjustable - Due to the design of the Urethane Motor Mounts, the engine mounts can be adjusted for height, if needed, for custom applications or installations. Need a few extra fractions of an inch to clear custom intercooler piping?? These can help you out!

Pre-assembled - Assembled in house and set to the factory Nissan engine mount specifications. These motor mounts are ready for installation right out of the box!

More direct engine feel - An inherent trait of the 70A durometer Energy Suspension Bushings, the stiffer engine mount bushings provide more driver feedback and feel.

Put the power to the ground - The stiffer engine mounts help prevent engine twisting during ON/OFF throttle transitions and launches. This helps transfer more power to the ground, quicker by reducing the amount of energy lost through engine movement.

Hassle free, low maintenance design - All components are Yellow Zinc Coated for corrosion prevention. The shielded design helps reduce the direct exposure of the urethane bushings to the radiant heat emitted from the exhaust manifold or turbo chargers.

Serviceability in car - Unlike the factory motor mounts which require removal of various components to access the top motor mount bolt to remove/replace the OEM Motor Mounts. The Z1 Motorsports Urethane Motor Mounts are 100% serviceable from beneath the vehicle. Simply remove the K-member (Engine Cross member).

Rebuildable design - These are the last motor mounts your vehicle will ever need. Why waste money on expensive OEM replacement Motor Mounts that will cost around between almost $340 to replace, when these will last much longer and can even be rebuilt for a fraction of the cost.

Sold as a complete kit, the Z1 Motorsports Urethane Motor Mount kit comes with the following:

- Z1 Motorsports Urethane Motor Mounts (Pair; Pre-assembled)
- Z1 Motorsports Urethane Motor Mount Installation/Servicing Instructions

To place an order click HERE.

Boost_lee · 04-10-2012, 05:38 PM

Nice piece, nice price, great space savings in the bay

John@Z1 · 05-02-2012, 10:07 AM

Quote:

Originally Posted by Boost_lee

Nice piece, nice price, great space savings in the bay

Yes sir and race teams are loving them

John@Z1 · 05-29-2012, 10:11 AM

New batch built last week!

John@Z1 · 06-08-2012, 12:40 PM

SFR in Action with Z1 Motor Mounts.

NewYorkJon34 · 06-30-2012, 01:41 AM

How long does it take to install these?

John@Z1 · 07-05-2012, 12:27 PM

Depends on the installer.

mprog · 07-06-2012, 02:40 AM

Could you describe the NVH increase?

Dustin@Z1 · 07-12-2012, 01:11 PM

Noise is not a real issue. It does not cause any chattering or increased in cabin noise. However, a slight increase in vibration can be noted when cranking the car. Once the engine is running, you really cannot tell a difference between the OEM or the Z1 Mounts. This is the appeal of the urethane mounts over a solid mount.

John@Z1 · 12-12-2012, 10:45 AM

Ready To Ship!

John@Z1 · 07-08-2013, 12:44 PM

Ready to Ship!

John@Z1 · 08-16-2013, 10:18 AM

Track tested father approved

2sl0w · 09-06-2013, 06:05 PM

I need to install mine still.

John@Z1 · 09-09-2013, 04:48 PM

Quote:

Originally Posted by 2sl0w

I need to install mine still.

Get on it 2slow!

John@Z1 · 09-12-2013, 04:25 PM

In stock!

04-10-2012, 04:57 PM	#1 (permalink)
John@Z1 The370Z.com Sponsor Join Date: Nov 2008 Location: GA Posts: 1,589 Drives: Turbos Rep Power: 20	Z1 Motorsports: 370Z/G37/R35 Urethane Motor Mounts Z1 Motorsports 370Z/G37/R35 Urethane Motor Mounts $198.00 Z1 Motorsports Urethane Motor Mount Set for all Nissan 370Z, GT-R (R35) and Infiniti G37 models. These 2 motor mounts come fully assembled and ready to install in the same manner as the original mounts. Expect these motor mounts to outlast your vehicle, however they are serviceable in the unlikely event there is ever a need to replace the urethane bushings. Designed to fill the need for a quality, affordable, upgraded motor mount, the Z1 Motorsports Urethane Motor Mounts address the failures of OEM Nissan Motor Mounts while offering many appealing advantages. The original OEM Nissan mounts often fail because the rubber bushing is subjected to tension eventually tearing it apart. The rubber bushings in the Z1 motor mounts always work in compression, never in tension, eliminating this mode of failure. Designed in Solidworks, tested extensively on the street and track and assembled in house, the Z1 Motorsports Urethane Motor Mounts will be the last set of motor mounts your Z will ever need! Side By Side With Factory Mounts On The Doran RC 370Z(Race Proven) thanks takjak2 Some of the key features of the Z1 Motorsports Urethane Motor Mounts includes: Energy Suspension Bushings - Z1 Motorsports teamed up with the industry leader in aftermarket performance suspension and drivetrain bushings to create a set of bushings that meet the demands of the 350Z and G35 in both fitment, durability and strength, and even increasing overall chassis rigidity. Direct replacement design - Requires NO modifications whatsoever to the vehicle or engine to install. Lower cost - Save some $$$ in comparison to the cost of alternative products on the market including the OEM Nissan replacement mounts. Lightweight - The Z1 Motorsports Urethane Motor Mounts will shave ~ 2 lbs off of the weight of your vehicle. Every ounce counts in the racing world! Compact design - In comparison to the OEM Nissan Motor Mounts, the Z1 Urethane Motor Mount replacements are smaller in size allowing for increased access around the engine mounts to such components as the A/C Compressor, brackets and turbo chargers. Height adjustable - Due to the design of the Urethane Motor Mounts, the engine mounts can be adjusted for height, if needed, for custom applications or installations. Need a few extra fractions of an inch to clear custom intercooler piping?? These can help you out! Pre-assembled - Assembled in house and set to the factory Nissan engine mount specifications. These motor mounts are ready for installation right out of the box! More direct engine feel - An inherent trait of the 70A durometer Energy Suspension Bushings, the stiffer engine mount bushings provide more driver feedback and feel. Put the power to the ground - The stiffer engine mounts help prevent engine twisting during ON/OFF throttle transitions and launches. This helps transfer more power to the ground, quicker by reducing the amount of energy lost through engine movement. Hassle free, low maintenance design - All components are Yellow Zinc Coated for corrosion prevention. The shielded design helps reduce the direct exposure of the urethane bushings to the radiant heat emitted from the exhaust manifold or turbo chargers. Serviceability in car - Unlike the factory motor mounts which require removal of various components to access the top motor mount bolt to remove/replace the OEM Motor Mounts. The Z1 Motorsports Urethane Motor Mounts are 100% serviceable from beneath the vehicle. Simply remove the K-member (Engine Cross member). Rebuildable design - These are the last motor mounts your vehicle will ever need. Why waste money on expensive OEM replacement Motor Mounts that will cost around between almost $340 to replace, when these will last much longer and can even be rebuilt for a fraction of the cost. Sold as a complete kit, the Z1 Motorsports Urethane Motor Mount kit comes with the following: - Z1 Motorsports Urethane Motor Mounts (Pair; Pre-assembled) - Z1 Motorsports Urethane Motor Mount Installation/Servicing Instructions To place an order click HERE. __________________ Z1 Motorsports will beat any advertised price on Nissan OEM Parts! 770-838-7777 ext 311 AIM: JohnatZ1 email: John@Z1motorsports.com

04-10-2012, 05:38 PM	#2 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 29	Nice piece, nice price, great space savings in the bay __________________ My TT Z

05-29-2012, 10:11 AM	#4 (permalink)
John@Z1 The370Z.com Sponsor Join Date: Nov 2008 Location: GA Posts: 1,589 Drives: Turbos Rep Power: 20	New batch built last week! __________________ Z1 Motorsports will beat any advertised price on Nissan OEM Parts! 770-838-7777 ext 311 AIM: JohnatZ1 email: John@Z1motorsports.com

06-08-2012, 12:40 PM	#5 (permalink)
John@Z1 The370Z.com Sponsor Join Date: Nov 2008 Location: GA Posts: 1,589 Drives: Turbos Rep Power: 20	SFR in Action with Z1 Motor Mounts. __________________ Z1 Motorsports will beat any advertised price on Nissan OEM Parts! 770-838-7777 ext 311 AIM: JohnatZ1 email: John@Z1motorsports.com

06-30-2012, 01:41 AM	#6 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	How long does it take to install these? __________________ NewYorkJon34's Ultimate Z Build

07-05-2012, 12:27 PM	#7 (permalink)
John@Z1 The370Z.com Sponsor Join Date: Nov 2008 Location: GA Posts: 1,589 Drives: Turbos Rep Power: 20	Depends on the installer. __________________ Z1 Motorsports will beat any advertised price on Nissan OEM Parts! 770-838-7777 ext 311 AIM: JohnatZ1 email: John@Z1motorsports.com

07-06-2012, 02:40 AM	#8 (permalink)
mprog Base Member Join Date: Jun 2011 Location: N. California Posts: 42 Drives: 09 G37s Coupe Rep Power: 14	Could you describe the NVH increase?

07-12-2012, 01:11 PM	#9 (permalink)
Dustin@Z1 The370Z.com Sponsor Join Date: Jun 2009 Location: NLA Posts: 1,313 Drives: NLA Rep Power: 18	Noise is not a real issue. It does not cause any chattering or increased in cabin noise. However, a slight increase in vibration can be noted when cranking the car. Once the engine is running, you really cannot tell a difference between the OEM or the Z1 Mounts. This is the appeal of the urethane mounts over a solid mount.

12-12-2012, 10:45 AM	#10 (permalink)
John@Z1 The370Z.com Sponsor Join Date: Nov 2008 Location: GA Posts: 1,589 Drives: Turbos Rep Power: 20	Ready To Ship! __________________ Z1 Motorsports will beat any advertised price on Nissan OEM Parts! 770-838-7777 ext 311 AIM: JohnatZ1 email: John@Z1motorsports.com

07-08-2013, 12:44 PM	#11 (permalink)
John@Z1 The370Z.com Sponsor Join Date: Nov 2008 Location: GA Posts: 1,589 Drives: Turbos Rep Power: 20	Ready to Ship! __________________ Z1 Motorsports will beat any advertised price on Nissan OEM Parts! 770-838-7777 ext 311 AIM: JohnatZ1 email: John@Z1motorsports.com

08-16-2013, 10:18 AM	#12 (permalink)
John@Z1 The370Z.com Sponsor Join Date: Nov 2008 Location: GA Posts: 1,589 Drives: Turbos Rep Power: 20	Track tested father approved 2sl0w likes this. __________________ Z1 Motorsports will beat any advertised price on Nissan OEM Parts! 770-838-7777 ext 311 AIM: JohnatZ1 email: John@Z1motorsports.com

09-06-2013, 06:05 PM	#13 (permalink)
2sl0w Base Member Join Date: Feb 2013 Location: Atlanta Posts: 106 Drives: Z34, BCNR33, F83 Rep Power: 12	I need to install mine still. __________________ \|\| Z1 Intake, U/L Plenum, Headers, Oil Cooler, Two Piece Rotors, SP Diff 3.54 FD, Semi Solid Mounts, Clutch + LW Flywheel + CSC Del \|\| Uprev \|\| A.R.T. Pipes + XYZ Mid Pipe w/ HFC \|\| Tomei CBE \|\| Nismo Sways \|\| BC BR 12k/10K \|\| SPC Arms \|\| Dewla Shroud \|\| Advan RSD \|\|

09-12-2013, 04:25 PM	#15 (permalink)
John@Z1 The370Z.com Sponsor Join Date: Nov 2008 Location: GA Posts: 1,589 Drives: Turbos Rep Power: 20	In stock! __________________ Z1 Motorsports will beat any advertised price on Nissan OEM Parts! 770-838-7777 ext 311 AIM: JohnatZ1 email: John@Z1motorsports.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone running the Z1 Motor Mounts?	ChipsWithDips	Engine & Drivetrain	8	06-25-2012 11:52 AM
[FOR SALE] Solid Motor Mounts	robtrink	Parts for sale (Private Classifieds)	5	08-17-2011 08:39 AM
What kind of motor mounts are u running in your boost z?	EVOHUNTER	Forced Induction	12	07-29-2011 05:01 PM
xenon lamps which mounts the 370Z ?	lamir	Exterior & Interior	6	05-16-2011 04:50 PM
STILLEN 370Z Urethane Fascia - Sneak Peek - In Development	Josh@STILLEN	Exterior & Interior	256	03-24-2011 10:24 PM