FS: Clutch Helper Springs!!!! Century Spring P/N 72577

ZForce · 10-29-2012, 08:25 AM

^Hey Mike, I am down for 2 sets, will send payment.

LMBmikeZ · 10-29-2012, 08:43 PM

sounds good.

ZForce · 11-02-2012, 02:56 PM

Quote:

Originally Posted by ZForce

^Hey Mike, I am down for 2 sets, will send payment.

Hey Mike...you got money, just completed the transaction on paypal.

Thanks,
Curtis

LMBmikeZ · 11-03-2012, 05:31 PM

got the payment I will try to have them out tomorrow but monday 100% probably wouldn't change the day you get them though because it would probably sit at the post office till some time on monday.........any way you can expect 5-10 business days for delivery!

BUMP still available, get them before they are gone!

ZForce · 11-03-2012, 06:46 PM

Quote:

Originally Posted by ZForce

Hey Mike...you got money, just completed the transaction on paypal.

Thanks,
Curtis

Quote:

Originally Posted by LMBmikeZ

got the payment I will try to have them out tomorrow but monday 100% probably wouldn't change the day you get them though because it would probably sit at the post office till some time on monday.........any way you can expect 5-10 business days for delivery.

No hurry, appreciate you still keeping ontop of this thread and very quick replies ! Will provide feedback after install.

LMBmikeZ · 11-16-2012, 01:59 PM

No one needs helper springs? Things have slowed down past month or two.

BUMP get them while I still have them available! I think I'm down to 38 left.

ZForce · 11-16-2012, 07:45 PM

Hey Mike, checking in on the status of my order, shipped on 11/5 right ?

EDIT: update, just received in the mail tonight. What timing, thanks Mike !!

LMBmikeZ · 11-16-2012, 10:55 PM

glad you got the shipment

hope you enjoy the spring

ZForce · 11-17-2012, 09:17 AM

Will give feedback once installed. It may not be be for some time as I am waiting on another mod part to be ordered. Great service on these springs.

LMBmikeZ · 11-17-2012, 01:34 PM

Thx Zforce

Still available for those missing out on the improved clutch response!

LMBmikeZ · 11-21-2012, 09:24 PM

BUMP - Clutch helper springs get yours before I sell out 36 left!

ZForce · 12-07-2012, 03:50 PM

Hey Mike, quick question. Why do these springs have a rough finish on both ends of them?

See pic for reference that you posted on page 1 post # 15.

It's like they have been ground down with a grinder. Was it done to make them flat? Are they supposed to stand on end, vertically straight up?

Bottom line is....does it really make any difference?

LMBmikeZ · 12-07-2012, 05:46 PM

Yes they are all like that, the spring is flat so it can seat in the clutch assembly perfectly!

Don't worry they are all supposed to be like that, I take it you haven't taken the OEM one out yet have you? When you do you will notice the OEM one will also stand up on its own with a flat top and bottom (a lot of springs are like these) the difference will be that the OEM one has much thicker metal for the coils in the spring. The OEM on has a very strong spring rate I think it was like 300lbs or something like that if my memory is correct..... my spring that I offer I believe is rated at 70 or 75lbs.

ZForce · 12-07-2012, 09:26 PM

Cool beans...and no I have not, but have read and seen pics on your other thread and esfouteen's thread. I thought that was the case with OEM spring and aftermarket spring. I tried to get my mechanic at the dealer to install it since the entire clutch pedal assembly was being replaced after my master slave cylinder was recently replaced. The clutch pedal assembly had a developed a quacking sound (no it's not the air seeping from the air breather hole on the compressor/shock housed in with the clutch helper spring). Turned out the shock was blown, seals.

Anywho...he was leery of using the spring, not that he would not do it for me as I am family with my dealer. He questioned the strength since it was shaved/grounded afraid it might make a creaking sound. I assured him it is not the case and several hundred Z/G members have been using the same spring for over a year and there is no creaking sound. So I just said shine it on and I will later have a monkey boy with small frame and fingers install it for me for some pizza and beer.

Thanks bro and apologies for the long winded reply. And for the record you are correct, the OEM is 300 lb and yours is like 70-75 lb.

Will update thread after I return from London and install the spring along with some other cosmetic goodies.

LMBmikeZ · 12-08-2012, 12:36 PM

Ya don't worry it is made like that with the grinding already done. They would have done it to clean up any sharp edges from manufacturing. Also there is no creeking in mine and its been installed the longest and no one else has reported creeking with the spring

10-29-2012, 08:43 PM	#197 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10350	sounds good. __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

11-03-2012, 05:31 PM	#199 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10350	got the payment I will try to have them out tomorrow but monday 100% probably wouldn't change the day you get them though because it would probably sit at the post office till some time on monday.........any way you can expect 5-10 business days for delivery! BUMP still available, get them before they are gone! __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

11-16-2012, 01:59 PM	#201 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10350	No one needs helper springs? Things have slowed down past month or two. BUMP get them while I still have them available! I think I'm down to 38 left. __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

11-16-2012, 07:45 PM	#202 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 21	Hey Mike, checking in on the status of my order, shipped on 11/5 right ? EDIT: update, just received in the mail tonight. What timing, thanks Mike !! Last edited by ZForce; 11-16-2012 at 10:10 PM. Reason: Updated status

11-16-2012, 10:55 PM	#203 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10350	glad you got the shipment hope you enjoy the spring __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

10-29-2012, 08:25 AM	#196 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 21	^Hey Mike, I am down for 2 sets, will send payment.

11-17-2012, 09:17 AM	#204 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 21	Will give feedback once installed. It may not be be for some time as I am waiting on another mod part to be ordered. Great service on these springs.

11-17-2012, 01:34 PM	#205 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10350	Thx Zforce Still available for those missing out on the improved clutch response! __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

11-21-2012, 09:24 PM	#206 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10350	BUMP - Clutch helper springs get yours before I sell out 36 left! __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

12-07-2012, 03:50 PM	#207 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 21	Hey Mike, quick question. Why do these springs have a rough finish on both ends of them? See pic for reference that you posted on page 1 post # 15. It's like they have been ground down with a grinder. Was it done to make them flat? Are they supposed to stand on end, vertically straight up? Bottom line is....does it really make any difference?

12-07-2012, 05:46 PM	#208 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10350	Yes they are all like that, the spring is flat so it can seat in the clutch assembly perfectly! Don't worry they are all supposed to be like that, I take it you haven't taken the OEM one out yet have you? When you do you will notice the OEM one will also stand up on its own with a flat top and bottom (a lot of springs are like these) the difference will be that the OEM one has much thicker metal for the coils in the spring. The OEM on has a very strong spring rate I think it was like 300lbs or something like that if my memory is correct..... my spring that I offer I believe is rated at 70 or 75lbs. __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

12-07-2012, 09:26 PM	#209 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 21	Cool beans...and no I have not, but have read and seen pics on your other thread and esfouteen's thread. I thought that was the case with OEM spring and aftermarket spring. I tried to get my mechanic at the dealer to install it since the entire clutch pedal assembly was being replaced after my master slave cylinder was recently replaced. The clutch pedal assembly had a developed a quacking sound (no it's not the air seeping from the air breather hole on the compressor/shock housed in with the clutch helper spring). Turned out the shock was blown, seals. Anywho...he was leery of using the spring, not that he would not do it for me as I am family with my dealer. He questioned the strength since it was shaved/grounded afraid it might make a creaking sound. I assured him it is not the case and several hundred Z/G members have been using the same spring for over a year and there is no creaking sound. So I just said shine it on and I will later have a monkey boy with small frame and fingers install it for me for some pizza and beer. Thanks bro and apologies for the long winded reply. And for the record you are correct, the OEM is 300 lb and yours is like 70-75 lb. Will update thread after I return from London and install the spring along with some other cosmetic goodies.

12-08-2012, 12:36 PM	#210 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10350	Ya don't worry it is made like that with the grinding already done. They would have done it to clean up any sharp edges from manufacturing. Also there is no creeking in mine and its been installed the longest and no one else has reported creeking with the spring __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch pedal too soft/no feel? Remove the helper spring!	esfourteen	Engine & Drivetrain	560	12-31-2020 12:17 PM
Clutch pedal helper springs!	LMBmikeZ	Engine & Drivetrain	0	08-23-2011 09:38 PM
Clutch Helper Spring (last chance)	esfourteen	Group Buys	202	08-06-2011 04:14 PM
Clutch Helper Spring	esfourteen	Group Buys	159	06-24-2011 06:30 PM