DIY: Installing Touring pedals on your Base

kenchan · 12-12-2009, 02:21 PM

np! looks finished/complete now, doesn't it?

NYBladeZ · 12-12-2009, 02:39 PM

I have the SP and I just noticed I have these pedals, base coupe otherwise

6spd · 12-12-2009, 02:57 PM

Quote:

Originally Posted by kenchan

np! looks finished/complete now, doesn't it?

sure does!

Quote:

Originally Posted by NYBladeZ

I have the SP and I just noticed I have these pedals, base coupe otherwise

WTF?!

kevr6 · 05-07-2010, 10:19 PM

Just did my pedals!! Thanks for this thread!

kenchan · 05-08-2010, 09:21 AM

np!

TongMan · 08-16-2010, 09:18 PM

Looks nice. But too expensive to do.

kenchan · 08-16-2010, 11:35 PM

gotta pay to play, tongman!

NISMOFO · 09-17-2010, 06:05 PM

Wow these are much more expensive than I'd like to pay......but I envy those that have the pedals :-)

kenchan · 09-17-2010, 09:08 PM

yah, they aren't cheap but if you like the style it's great.

modshack has aftermarket ones that he designed with the manufacturer if you want to check those out. much cheaper than the OEM's.

flashburn · 09-17-2010, 09:22 PM

Yep, I have those pedals, highly recommended. I have the grid design. You can see photos at SRP Racing - Custom Aluminum Racing Pedals

kenchan · 09-17-2010, 09:25 PM

yep, i just like the OEM pedals.

NewYorkJon34 · 01-03-2011, 03:56 PM

first of all the brake/clutch pedals are very difficult to install, my fingers are def not happy right now, lol They do not just "snap on" as others have said, to help others out I have found the easiest way of doing these: spray a tiny bit of wd-40 on the inside of the bottom of the pedal, then take a blow dryer & heat the back of the pedal for about a minute, doing so let's the rubber expand and is easier to stretch. Then put the top part on first, then with both hands pull either side of the pedal backing as hard as you can while trying to stretch it over the bottom. Hopefully after a few tries it snaps on for you, hope this helps others. Also you may need to re-heat the rubber if it cools off.

kenchan · 01-17-2011, 05:58 PM

hahahaha, it's not difficult NY John. just wrap it over.

NewYorkJon34 · 01-17-2011, 07:29 PM

It was difficult cus you had to really stretch that pedal, I had to heat it up to be able to put it on.

shadoquad · 02-07-2011, 11:44 AM

Kenchan, thanks for the DIY! I just took mine off yesterday, and it was easy as pie!

I have to wait for the person selling me his to mail them to me. It's complicated. But I'll be looking at this thread again when I get the touring pedals in the mail.

12-12-2009, 02:39 PM	#17 (permalink)
NYBladeZ A True Z Fanatic Join Date: Apr 2009 Location: New York Posts: 2,158 Drives: Lotus Exige S Rep Power: 20	I have the SP and I just noticed I have these pedals, base coupe otherwise __________________ 2009 Carbon Fiber/Red 370z aka Trish: Sports Package, Meisterschaft full catback, Fast Intentions Longtube Headers, Injen Long Tube Intakes, UpRev Tune: Sold 2008 Lotus Exige S Club Racer aka Bella, always leaves me smiling

05-07-2010, 10:19 PM	#19 (permalink)
kevr6 A True Z Fanatic Join Date: Feb 2009 Location: N.W. Atlanta Posts: 1,515 Drives: '09 Graphite 370Z 6M Rep Power: 666	Just did my pedals!! Thanks for this thread! __________________ *Beware...* Daily Sliding In My ZLED!

09-17-2010, 09:22 PM	#25 (permalink)
flashburn A True Z Fanatic Join Date: May 2009 Location: Central Florida Posts: 1,884 Drives: '12 Corvette GS 6M Rep Power: 19	Yep, I have those pedals, highly recommended. I have the grid design. You can see photos at SRP Racing - Custom Aluminum Racing Pedals __________________ Current Ride: 2012 Chevrolet Corvette Grand Sport Centennial Edition Carbon Flash 6M Previous Ride: 2009 Nissan 370Z Sport Platinum Graphite 7AT

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
installing Touring seats in BASE/SPORT	martin82	Exterior & Interior	27	09-10-2016 04:12 PM
WTB touring foot pedals & stock base steering wheel	NewYorkJon34	Wanted	4	01-18-2011 06:20 PM
Solution for aluminum touring pedals for base model 370z.	Geeve	Exterior & Interior	80	10-02-2009 10:35 PM
Research: Touring Aluminum Pedals onto Base	GonGo	DIY Section (Do-It-Yourself)	10	09-21-2009 01:30 PM
Has anybody w/ Base interior swapped out their pedals for the touring set?	kevr6	Exterior & Interior	2	04-04-2009 02:58 PM

12-12-2009, 02:21 PM	#16 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	np! looks finished/complete now, doesn't it?

05-08-2010, 09:21 AM	#20 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	np!

08-16-2010, 09:18 PM	#21 (permalink)
TongMan A True Z Fanatic Join Date: Feb 2010 Location: NorCal Posts: 1,297 Drives: 2013 Nissan GTR Rep Power: 716	Looks nice. But too expensive to do.

08-16-2010, 11:35 PM	#22 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	gotta pay to play, tongman!

09-17-2010, 06:05 PM	#23 (permalink)
NISMOFO Enthusiast Member Join Date: Jan 2009 Location: McKinney, TX Posts: 269 Drives: 370Z Rep Power: 17	Wow these are much more expensive than I'd like to pay......but I envy those that have the pedals :-)

09-17-2010, 09:08 PM	#24 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	yah, they aren't cheap but if you like the style it's great. modshack has aftermarket ones that he designed with the manufacturer if you want to check those out. much cheaper than the OEM's.

09-17-2010, 09:25 PM	#26 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	yep, i just like the OEM pedals.

01-03-2011, 03:56 PM	#27 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	first of all the brake/clutch pedals are very difficult to install, my fingers are def not happy right now, lol They do not just "snap on" as others have said, to help others out I have found the easiest way of doing these: spray a tiny bit of wd-40 on the inside of the bottom of the pedal, then take a blow dryer & heat the back of the pedal for about a minute, doing so let's the rubber expand and is easier to stretch. Then put the top part on first, then with both hands pull either side of the pedal backing as hard as you can while trying to stretch it over the bottom. Hopefully after a few tries it snaps on for you, hope this helps others. Also you may need to re-heat the rubber if it cools off.

01-17-2011, 05:58 PM	#28 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	hahahaha, it's not difficult NY John. just wrap it over.

01-17-2011, 07:29 PM	#29 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	It was difficult cus you had to really stretch that pedal, I had to heat it up to be able to put it on.

02-07-2011, 11:44 AM	#30 (permalink)
shadoquad A True Z Fanatic Join Date: Apr 2010 Location: . Posts: 42,608 Drives: . Rep Power: 3886	Kenchan, thanks for the DIY! I just took mine off yesterday, and it was easy as pie! I have to wait for the person selling me his to mail them to me. It's complicated. But I'll be looking at this thread again when I get the touring pedals in the mail.