Change engine oil step by step

aszyd · 07-25-2014, 08:48 PM

Quote:

Originally Posted by Plasmite

That sounds more like they mated it up to the surface without lubing the o-ring first. You can put a filter on tight with a 1/4 turn and have to plasma cut it off if someone didn't lube the mating surfaces first.

I am on my 10 billionth oil change (HD apprentice) and it is STILL something that drives me batshi+ crazy lol

That's very possible. How do you feel about filling the filter with oil before putting it on the car? On the new Focus, the filter faces downwards, so it was quite easy to do the pre-fill, but with these sideways mounted filters, I don't know how to do it without making a mess. So I usually don't...

Quote:

Originally Posted by 1325

Hand tighten the oil filter and for removal, nothing does a better job than using oil filter pliers. Its teeth with firmly grasp the filter and loosen with ease.

Back when I had my first car, I would let Walmart do the oil changes. They once "gifted" me a filter wrench. When I got home after a change, I noticed that the hood was bulging oddly on one side. When I opened it up, there was a filter wrench just sitting there

. I think my father has it now, I'm not sure.

1325 · 07-26-2014, 02:54 PM

Quote:

Originally Posted by aszyd

That's very possible. How do you feel about filling the filter with oil before putting it on the car? On the new Focus, the filter faces downwards, so it was quite easy to do the pre-fill, but with these sideways mounted filters, I don't know how to do it without making a mess. So I usually don't...

No need to charge it until it's nearly full. I pre-fill approximately until about half and mount it. Once you pour oil into the engine itself gravity will fill the filter anyway.

Quote:

Originally Posted by aszyd

Back when I had my first car, I would let Walmart do the oil changes. They once "gifted" me a filter wrench. When I got home after a change, I noticed that the hood was bulging oddly on one side. When I opened it up, there was a filter wrench just sitting there

. I think my father has it now, I'm not sure.

LOL Nice! Wal-Mart is a gift and a curse.

Plasmite · 07-28-2014, 08:45 AM

Quote:

Originally Posted by aszyd

That's very possible. How do you feel about filling the filter with oil before putting it on the car? On the new Focus, the filter faces downwards, so it was quite easy to do the pre-fill, but with these sideways mounted filters, I don't know how to do it without making a mess. So I usually don't...

Back when I had my first car, I would let Walmart do the oil changes. They once "gifted" me a filter wrench. When I got home after a change, I noticed that the hood was bulging oddly on one side. When I opened it up, there was a filter wrench just sitting there

. I think my father has it now, I'm not sure.

There is technically NO need to fill a OIL filter with oil before putting on. You can put the filter on, then start the car, wait for the oil pressure to hit where it would normally sit. Shut her down, wait a good 10 mins for the oil to collect in the pan again and top her up the 1/4 quart or however big the filter is. This is a SOP for everything I have worked on, never had an issue.

Fuel filter is ENTIRELY different. YOU MUST fill the filter, else you are flushing out the injectors. So a note for people with diesel.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] WORK Gnosis GS4 Step Lip 20 inch Step Lip	Storm	Parts for sale (Private Classifieds)	30	03-20-2014 01:02 PM
my first step -_-	elia_ebyss	Forced Induction	45	09-13-2013 10:33 AM
WOT box 2-step	NIZZING	Forced Induction	14	02-14-2013 10:32 PM
Red GT-R Push Start Button Installation Step by Step~~~Super easy!	cycy89	DIY Section (Do-It-Yourself)	25	03-31-2012 10:52 PM
Looking to step up from the Yaris	Kiteless	New Forum Member	0	02-06-2012 07:35 PM