|
Thx for the write up. I installed the B&M today (paid 170 shipped). The cutting part wasn't to bad, as I used a dremmel. It is definately a bit more
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
09-25-2011, 05:44 PM
|
#14 (permalink) |
|
Base Member
Join Date: Sep 2010
Location: Alabama
Posts: 49
Drives: 2012 GTR
Rep Power: 15  |
Thx for the write up. I installed the B&M today (paid 170 shipped). The cutting part wasn't to bad, as I used a dremmel. It is definately a bit more mechanical, but the shifts are much faster, as stock is just so mushy. As far as side to side movement, I have none. Coming out of reverse, you actually have to move the shifter left before it will pop up, not just move it forward and out of reverse. According to B&M, this is on purpose to create an "audible click" to let the driver know reverse is now locked out. Oy yeh, just like the last guy, stock shift knob destroyed, leather also peeled off the plastic knob. All in all, a pretty easy install. Now I just need a new shift knob :-)
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: TWM Short Shifter and Leather Shifter Boot | GaleForce | DIY Section (Do-It-Yourself) | 84 | 04-11-2018 04:42 PM |
| DIY 6MT shifter surround on 7AT install and more CFE | 370ZilverZ | DIY Section (Do-It-Yourself) | 16 | 03-08-2018 12:22 PM |
| What is the best short-throw shifter and shifter knob combo? | ZInferno0248 | Nissan 370Z General Discussions | 79 | 03-06-2017 06:57 AM |
| Shifter Rattle After CBE & HFC install | Colesy | Engine & Drivetrain | 10 | 02-01-2012 11:43 PM |
| My turn w/ the Short Shifter install, here is the knob I used! | kevr6 | Exterior & Interior | 29 | 05-18-2010 06:00 PM |
1Likes
Threaded Mode
