DIY : Radar display in mirror

Plasmite

I have finished my install. Will have pics of the working display in a bit.

I can safely say that NO etching is needed to have a nice clear display. It is very bright and quite easy to read.

I do apologize for not having pics of GPS and modular placement. I am not really one for taking a bunch of pics, considering I work alone, its a bit of a pain.

To recap, I placed the display in my mirror, the gps in the passenger A pillar, near the bottom of the pillar (was a tight fit, the unit is quite a bit bigger than a HU gps module) out of the way of airbag deployment, the control module that everything plugs into is next to the computer module on the passenger side. USB is next to the 12v powersource on the passengers side, under the glove box. Speaker is next to the firewall, tucked in the corner with double sided tape on the passenger side.

Laser, radar placement was pretty straight forward. The rear jammer is above the license plate and under the trunk open button. The front shifters on the top grill piece of the stock bumper. The radar detector in the middle of the grill of the stock bumper. All lines from the front going through the firewall at the same point as the front harness.

__________________
WISHLIST