DIY engine bay wire tuck

Rid3_FaM0uS · 07-01-2014, 08:29 AM

This took me about a week of slow 4 ish hours a night after work and one hard hitting weekend day/night. But I took it very slow. Just as turboing my car I spent massive hours of doing homework(googling) and forum crawling. This was my first ever tuck and I also knew I wanted to put it on here for you guys to try yourselves; because of those reasons I took my VERY sweet time. Making sure to take several pictures and twice over my work. To do this again I could honestly bang it out in two days time (16 ish hours) for the engine harness tuck. Probably 20 hours total to do a whole engine bay and relocate the ground starter cable wires.

exsanity · 07-01-2014, 11:30 PM

Quote:

Originally Posted by Rid3_FaM0uS

This took me about a week of slow 4 ish hours a night after work and one hard hitting weekend day/night. But I took it very slow. Just as turboing my car I spent massive hours of doing homework(googling) and forum crawling. This was my first ever tuck and I also knew I wanted to put it on here for you guys to try yourselves; because of those reasons I took my VERY sweet time. Making sure to take several pictures and twice over my work. To do this again I could honestly bang it out in two days time (16 ish hours) for the engine harness tuck. Probably 20 hours total to do a whole engine bay and relocate the ground starter cable wires.

I may try this this winter as I can't drive in the snow.

07-01-2014, 08:29 AM	#1 (permalink)
Rid3_FaM0uS Track Member Join Date: Apr 2012 Location: Wapakoneta, Ohio Posts: 506 Drives: 2011 BS Nismo 370z Rep Power: 44	This took me about a week of slow 4 ish hours a night after work and one hard hitting weekend day/night. But I took it very slow. Just as turboing my car I spent massive hours of doing homework(googling) and forum crawling. This was my first ever tuck and I also knew I wanted to put it on here for you guys to try yourselves; because of those reasons I took my VERY sweet time. Making sure to take several pictures and twice over my work. To do this again I could honestly bang it out in two days time (16 ish hours) for the engine harness tuck. Probably 20 hours total to do a whole engine bay and relocate the ground starter cable wires. Wiggins3377 and GaleForce like this. __________________ Always under construction. . .

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Engine Bay Wire Tuck	O&G	DIY Section (Do-It-Yourself)	39	03-31-2014 01:52 PM
Question on power wire run and engine bay	ksagis	Audio & Video	5	12-27-2013 09:05 AM
Wire Tuck anyone?	RyanWest	Engine & Drivetrain	4	12-19-2012 06:48 PM
Engine Grounding Wire Install	Bodytechz	Engine & Drivetrain	0	04-28-2011 04:10 PM
Tuck in your shirt.	insalubrious	The Lounge (Off Topic)	29	10-10-2009 09:39 PM