DIY: STILLEN G3 Intakes

atx370z · 09-12-2010, 07:11 PM

Just finished my Stillen G3 install. Pain in the *** to get the passenger side tubing to line up and DAMN the filters are tight in that space they sit in... Also, scratched the pipes up pretty good getting them through the holes

Took me 2.5 hours and im very mechanically inclined. If i had to do it again it would be about 1.5 - 2 hours probably.

JollyGoodChap · 10-06-2010, 02:34 PM

anyone else miss the Older style Stillen intakes with the "venturi" ring filters? I know the new k&n ones say that have one built in but after hearing it, it's def not hte same. I know it's may be a small detail but I like the older style myself. Kind of like the JWT Pop chargers I guess

tsolin01 · 10-06-2010, 04:29 PM

I installed mine last weekend and scratched up the driver side pipe a lot lol. Also, yea the filters are pretty tight in there, that's normal right? I remember the passenger side one was touching on a bolt slightly at the top.

The driver side was the toughest for me to slide through.

LinPark · 10-10-2010, 01:03 PM

+1 Rep for you. I used this to help me remove the passenger side intake so I could get to some bolts. Will most likely use the entire write up when I install my new intakes later on.

Z Fire · 10-20-2010, 09:30 AM

Stillen mentions on their website that the G3 intakes will not fit the NISMO. Do you have any idea why ?

djpathfinder · 10-20-2010, 10:41 AM

There's one or two other threads that talk about Nismos and G3's. They will fit with slight modification/shifting of the vertical plastic inserts (?). Can't remember exactly. Try searching for "stillen intake nismo".

I found one of the threads anyway:
STILLEN Generation 3 Ultra Long Tube Dual Intake

EazyD · 11-14-2010, 07:13 PM

Seeing lots of Photobucket images not found OP

Snakes709 · 12-05-2010, 09:30 AM

sorry guys, my photobucket account was full so i had to delete a few pictures. Seeing as i dont own a 370z anymore i started deleted some of the Z, guess i didnt realise i was deleting the DYI

hdskull · 12-31-2010, 04:13 PM

Does anyone else have the pictures that the OP deleted?

Calvin · 02-09-2011, 05:49 PM

pictures don't work ;(

rli2bcz · 05-23-2011, 02:49 AM

does anybody know what size the filter is?

dthem370 · 05-23-2011, 04:59 PM

Quote:

Originally Posted by rli2bcz

does anybody know what size the filter is?

I don't know the size but the part number is K&N RU-2820

rli2bcz · 05-24-2011, 01:07 AM

i need to know the size of the inlet and how long it is.

djpathfinder · 05-24-2011, 01:49 AM

The following specs indicate tube diameter:
RU-2820 - K&N Universal Air Filters, Universal Rubber Filter

As for other info, try contacting Stillen or a local member with an uninstalled kit or someone willing to pull their bumper off for you.

rli2bcz · 05-26-2011, 01:04 AM

thanks for the info!

09-12-2010, 07:11 PM	#91 (permalink)
atx370z Track Member Join Date: Aug 2010 Location: Austin, TX Posts: 637 Drives: 10 370Z T/S M6 Rep Power: 16	Just finished my Stillen G3 install. Pain in the *** to get the passenger side tubing to line up and DAMN the filters are tight in that space they sit in... Also, scratched the pipes up pretty good getting them through the holes Took me 2.5 hours and im very mechanically inclined. If i had to do it again it would be about 1.5 - 2 hours probably. Last edited by atx370z; 09-12-2010 at 07:41 PM.

10-06-2010, 04:29 PM	#93 (permalink)
tsolin01 Track Member Join Date: Feb 2010 Location: Dallas, TX Posts: 657 Drives: 2010 370Z Rep Power: 16	I installed mine last weekend and scratched up the driver side pipe a lot lol. Also, yea the filters are pretty tight in there, that's normal right? I remember the passenger side one was touching on a bolt slightly at the top. The driver side was the toughest for me to slide through. __________________ SOLD 12/30/2011 2010 370Z Coupe Monterey Blue 6MT/Touring/Sport/Nav F.I. CBE CF w/ 12" Res \| V1 \| SecondSkin \| Stillen G3 \| EVO-R CF B-Pillars \| Volk GT-S Ti Gunmetal 19x9.5 +30 F, 19x10.5 +8 R \| Swift Spec-R Springs

10-20-2010, 10:41 AM	#96 (permalink)
djpathfinder A True Z Fanatic Join Date: Mar 2010 Location: Edmonton, Canada Posts: 12,910 Drives: 2012 GT-R BE Rep Power: 733	There's one or two other threads that talk about Nismos and G3's. They will fit with slight modification/shifting of the vertical plastic inserts (?). Can't remember exactly. Try searching for "stillen intake nismo". I found one of the threads anyway: STILLEN Generation 3 Ultra Long Tube Dual Intake __________________ 2012 GT-R Black Edition Jet Black 2010 370Z 40th Anniversary // SOLD

12-05-2010, 09:30 AM	#98 (permalink)
Snakes709 A True Z Fanatic Join Date: Aug 2009 Location: Edmonton Posts: 1,205 Drives: 2011 Evo-X GSR Rep Power: 18	sorry guys, my photobucket account was full so i had to delete a few pictures. Seeing as i dont own a 370z anymore i started deleted some of the Z, guess i didnt realise i was deleting the DYI __________________ 2011 Evo-GSR AMS 2.4 stroker/ bore, FP Black build in progress. Sponsor: DSG Performance

02-09-2011, 05:49 PM	#100 (permalink)
Calvin A True Z Fanatic Join Date: Aug 2009 Location: Castro Valley, CA Age: 34 Posts: 1,418 Drives: 4GS, R8v10 Rep Power: 18	pictures don't work ;( __________________ BUILD THREAD SPONSORED BY: SPEEDELEMENT

10-06-2010, 02:34 PM	#92 (permalink)
JollyGoodChap Enthusiast Member Join Date: Aug 2010 Location: Lust Angeles Posts: 328 Drives: Z34 Rep Power: 15	anyone else miss the Older style Stillen intakes with the "venturi" ring filters? I know the new k&n ones say that have one built in but after hearing it, it's def not hte same. I know it's may be a small detail but I like the older style myself. Kind of like the JWT Pop chargers I guess

10-10-2010, 01:03 PM	#94 (permalink)
LinPark A True Z Fanatic Join Date: Jan 2010 Location: Columbus, OH Posts: 1,077 Drives: '17 Camaro 2SS A8 Rep Power: 23	+1 Rep for you. I used this to help me remove the passenger side intake so I could get to some bolts. Will most likely use the entire write up when I install my new intakes later on.

10-20-2010, 09:30 AM	#95 (permalink)
Z Fire Base Member Join Date: Sep 2010 Location: Virginia Posts: 4 Drives: 2009 370Z Nismo Rep Power: 15	Stillen mentions on their website that the G3 intakes will not fit the NISMO. Do you have any idea why ?

11-14-2010, 07:13 PM	#97 (permalink)
EazyD A True Z Fanatic Join Date: Nov 2009 Location: Massachusetts, USA Posts: 1,211 Drives: 2010 6MT Sport pkg. Rep Power: 26	Seeing lots of Photobucket images not found OP

12-31-2010, 04:13 PM	#99 (permalink)
hdskull Track Member Join Date: Jun 2009 Location: San Diego Posts: 680 Drives: '10 Black 370Z 6MT Rep Power: 17	Does anyone else have the pictures that the OP deleted?

05-23-2011, 02:49 AM	#101 (permalink)
rli2bcz Base Member Join Date: Apr 2010 Location: Las Vegas Posts: 237 Drives: Nissan 370z Rep Power: 15	does anybody know what size the filter is?

05-24-2011, 01:07 AM	#103 (permalink)
rli2bcz Base Member Join Date: Apr 2010 Location: Las Vegas Posts: 237 Drives: Nissan 370z Rep Power: 15	i need to know the size of the inlet and how long it is.

05-24-2011, 01:49 AM	#104 (permalink)
djpathfinder A True Z Fanatic Join Date: Mar 2010 Location: Edmonton, Canada Posts: 12,910 Drives: 2012 GT-R BE Rep Power: 733	The following specs indicate tube diameter: RU-2820 - K&N Universal Air Filters, Universal Rubber Filter As for other info, try contacting Stillen or a local member with an uninstalled kit or someone willing to pull their bumper off for you. __________________ 2012 GT-R Black Edition Jet Black 2010 370Z 40th Anniversary // SOLD

05-26-2011, 01:04 AM	#105 (permalink)
rli2bcz Base Member Join Date: Apr 2010 Location: Las Vegas Posts: 237 Drives: Nissan 370z Rep Power: 15	thanks for the info!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] Stillen Gen 3 Intakes	ShockWave	Parts for sale (Private Classifieds)	4	04-26-2012 11:18 PM
WTB: Stillen G3 Intakes or K&N Typhoon intakes!	gromano	Parts for sale (Private Classifieds)	5	07-15-2010 09:38 PM
Wtb - stillen exhaust / stillen intakes / berk cats	xbigb4ller69z	Wanted	0	03-25-2010 12:39 AM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Australia/New Zealand	29	09-27-2009 01:53 PM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Engine & Drivetrain	6	09-06-2009 06:20 PM