|
1. Use the same instructions for removing the dash panel to gain access to the key fob security assembly. There are 3 screws to remove the VDC switch bracket from
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
04-25-2010, 02:50 PM
|
#1 (permalink) |
|
A True Z Fanatic
Join Date: Jan 2009
Location: Kansas
Posts: 3,800
Drives: 09 Z34-TT 6MT
Rep Power: 43   |
VDC Switch
1. Use the same instructions for removing the dash panel to gain access to the key fob security assembly. There are 3 screws to remove the VDC switch bracket from the dash. The uppermost screw should be removed from behind the dash (easiest access) using a short Philips head screwdriver. The two bottom screws can be removed from underneath the steering column.
2. Pop the switch off the bracket. Then carefully pry the sides of the switch to release the connector end. Circled in red is the 0805 LED to change.  3. Completed modification. Notice the switch already has some yellow tint, so LED colors other than white should show up fine. 
__________________
Last edited by DIGItonium; 02-08-2011 at 07:49 PM. Reason: Embed Picture Files |
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Want to change the interior | Gables | Exterior & Interior | 10 | 05-17-2012 04:19 PM |
| pod lighting color change? | g35300mm | Nissan 370Z General Discussions | 2 | 02-10-2010 01:28 PM |
| what interior color?? | Arcangel | Nissan 370Z General Discussions | 15 | 03-08-2009 10:11 PM |
| powdercoating just to change color? | mattkim85 | Nissan 370Z General Discussions | 2 | 03-02-2009 03:08 PM |
29Likes
Hybrid Mode
