DIY Yaw Sensor rocker switch

steve_ · 06-14-2018, 02:31 AM

Can anyone tell me if this will let me stand on the brake and do a standing burnout for the drag strip, there are so many posts of people that do this mod and they say they don't know , not sure, haven't tried it blahh blahh , so who can say for sure yes or no that I can do a standing burnout with the brakes?

jchammond · 06-14-2018, 03:04 AM

Quote:

Originally Posted by steve_

Can anyone tell me if this will let me stand on the brake and do a standing burnout for the drag strip, there are so many posts of people that do this mod and they say they don't know , not sure, haven't tried it blahh blahh , so who can say for sure yes or no that I can do a standing burnout with the brakes?

Unsure; as I added line-loc to mine also...didn’t want to fry the rear brakes.

SouthArk370Z · 06-14-2018, 07:51 AM

Quote:

Originally Posted by steve_

Can anyone tell me if this will let me stand on the brake and do a standing burnout for the drag strip, ... ?

A yaw switch will not allow standing burnouts; you need to pull the stop light fuse. There is also at least one DIY on how to install a switch to accomplish the same thing (breaks the brake-lights-are-on signal to ECM).

SG4247 · 06-14-2018, 09:25 AM

The other option is the throttle hijack feature from Ecutek.

I just got mine working, and the software changes to the ECU will now allow me to burn rubber with the brake on as far and as long as I want.

My yaw sensor has been disabled for years. That had zero impact on burnout capability.

What actually happens in your case, is that the throttles will be closed, if the ECU sees the brake switch on and the gas pedal voltage high. This effectively prevents the driver from pressing the brake and gas pedal at the same time. The yaw sensor is not an input in this case.

steve_ · 06-14-2018, 07:28 PM

Ok thanks guys , it looks like I'll have to get the arc add on to my up rev tune then to enable burnout mode

Tractionless · 01-13-2019, 10:36 AM

When switching off traction control and the installed yaw switch does the ABS light also come on, effectively shutting off ABS too?

gomer_110 · 01-13-2019, 11:26 AM

No. You can cut the power to the yaw sensor and still retain functional ABS.

SouthArk370Z · 01-13-2019, 11:40 AM

Quote:

Originally Posted by Tractionless

When switching off traction control and the installed yaw switch does the ABS light also come on, effectively shutting off ABS too?

Descriptions, drawings, schematics, etc are in the FSM (link in my sig).

Not that you shouldn't believe Gomer_110 (he gives good answers), but:
1) Everyone here is just Some Guy On The Intertubes.
2) The FSM is a great resource for anyone that does their own work on a Z.

Tractionless · 01-13-2019, 12:04 PM

Quote:

Originally Posted by SouthArk370Z

Descriptions, drawings, schematics, etc are in the FSM (link in my sig).

Not that you shouldn't believe Gomer_110 (he gives good answers), but:
1) Everyone here is just Some Guy On The Intertubes.
2) The FSM is a great resource for anyone that does their own work on a Z.

I have the FSM; however, as we all know it simply doesn't tell the experiences of others when it comes to modding factory systems. IMO it's useless in my query.

gomer_110 · 01-13-2019, 01:13 PM

Quote:

Originally Posted by SouthArk370Z

Descriptions, drawings, schematics, etc are in the FSM (link in my sig).

Not that you shouldn't believe Gomer_110 (he gives good answers), but:
1) Everyone here is just Some Guy On The Intertubes.
2) The FSM is a great resource for anyone that does their own work on a Z.

Most of the time at least.

SouthArk370Z · 01-13-2019, 02:33 PM

Quote:

Originally Posted by Tractionless

I have the FSM; however, as we all know it simply doesn't tell the experiences of others when it comes to modding factory systems. IMO it's useless in my query.

It would tell you that the yaw sensor was not involved in the ABS system.

But, yeah, it's good to get confirmation from other members.

cossie1600 · 01-21-2019, 08:31 PM

So that green wire is a pain in the *** to get to. Would it seem smart to insert two posi tap to the wire at both ends, then extend the wire to an on off switch. After that, just cut the wire in between the two posi tap?

jchammond · 01-21-2019, 09:18 PM

Pic of TC turned off & 2nd picis with Yaw sensor(green wire)open.

I called it my “Drift Switch” & didn’t bother with TC switch after adding yaw disconnect switch.
Never played with ABS to see how they performed while yaw was disabled.
Good to know they work

Sent from my iPhone using Tapatalk

JARblue · 01-21-2019, 11:07 PM

What's that D symbol in the gear shift display?

jchammond · 01-22-2019, 04:22 AM

Quote:

Originally Posted by JARblue

What's that D symbol in the gear shift display?

D is for “Drift”

06-14-2018, 09:25 AM	#49 (permalink)
SG4247 Track Member Join Date: Oct 2016 Location: OKC Posts: 781 Drives: 2010 touring Rep Power: 7842	The other option is the throttle hijack feature from Ecutek. I just got mine working, and the software changes to the ECU will now allow me to burn rubber with the brake on as far and as long as I want. My yaw sensor has been disabled for years. That had zero impact on burnout capability. What actually happens in your case, is that the throttles will be closed, if the ECU sees the brake switch on and the gas pedal voltage high. This effectively prevents the driver from pressing the brake and gas pedal at the same time. The yaw sensor is not an input in this case. SouthArk370Z and axmea? like this. Last edited by SG4247; 06-14-2018 at 09:31 AM.

01-13-2019, 10:36 AM	#51 (permalink)
Tractionless A True Z Fanatic Join Date: Jan 2016 Location: Atlantic SE Posts: 1,322 Drives: '10 K23 ST 7AT Rep Power: 30525	When switching off traction control and the installed yaw switch does the ABS light also come on, effectively shutting off ABS too? __________________ Toys Not Tots

01-13-2019, 11:26 AM	#52 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36941	No. You can cut the power to the yaw sensor and still retain functional ABS. SouthArk370Z and Tractionless like this. __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

01-21-2019, 09:18 PM	#58 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 57 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	Pic of TC turned off & 2nd picis with Yaw sensor(green wire)open. I called it my “Drift Switch” & didn’t bother with TC switch after adding yaw disconnect switch. Never played with ABS to see how they performed while yaw was disabled. Good to know they work Sent from my iPhone using Tapatalk __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

01-21-2019, 11:07 PM	#59 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	What's that D symbol in the gear shift display? madwi and jchammond like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

06-14-2018, 02:31 AM	#46 (permalink)
steve_ Base Member Join Date: Mar 2018 Location: Perth Australia Posts: 22 Drives: 10 370z auto Rep Power: 7	Can anyone tell me if this will let me stand on the brake and do a standing burnout for the drag strip, there are so many posts of people that do this mod and they say they don't know , not sure, haven't tried it blahh blahh , so who can say for sure yes or no that I can do a standing burnout with the brakes?

06-14-2018, 07:28 PM	#50 (permalink)
steve_ Base Member Join Date: Mar 2018 Location: Perth Australia Posts: 22 Drives: 10 370z auto Rep Power: 7	Ok thanks guys , it looks like I'll have to get the arc add on to my up rev tune then to enable burnout mode

01-21-2019, 08:31 PM	#57 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 30	So that green wire is a pain in the *** to get to. Would it seem smart to insert two posi tap to the wire at both ends, then extend the wire to an on off switch. After that, just cut the wire in between the two posi tap?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Yaw sensor switch	dimitarm	Exterior & Interior	33	08-09-2017 10:13 PM
YAW Sensor Rocker Switch	dP3NGU1N	DIY Section (Do-It-Yourself)	23	11-10-2013 05:57 PM
Viper Security System/Tilt sensor/Proximity sensor	kfull	Nissan 370Z General Discussions	4	04-27-2012 12:10 AM
Installed the Rocker Stripe (pic)	kent370	Member's 370Z Gallery	9	02-15-2012 03:30 PM
Rocker panel chips?	JGreenwood07	Exterior & Interior	2	07-14-2010 10:58 AM