Nissan 370Z Forum  

DIY: Steering Wheel Lock Failure FIX!

Originally Posted by hrtbrknprince Question. My car is fine but I want to remove the fuse as a precaution. Its a 2014 model. Nissan dealer says there isn't a TSB

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > DIY Section (Do-It-Yourself)


Like Tree41Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 01-09-2018, 04:21 PM   #61 (permalink)
Premium Member
 
Jayhovah's Avatar
 
Join Date: May 2013
Location: St. Pete, FL
Posts: 3,848
Drives: 520whp Fire Breather
Rep Power: 86951
Jayhovah has a reputation beyond reputeJayhovah has a reputation beyond reputeJayhovah has a reputation beyond reputeJayhovah has a reputation beyond reputeJayhovah has a reputation beyond reputeJayhovah has a reputation beyond reputeJayhovah has a reputation beyond reputeJayhovah has a reputation beyond reputeJayhovah has a reputation beyond reputeJayhovah has a reputation beyond reputeJayhovah has a reputation beyond repute
Default

Quote:
Originally Posted by hrtbrknprince View Post
Question. My car is fine but I want to remove the fuse as a precaution. Its a 2014 model. Nissan dealer says there isn't a TSB for my car but since the car hasn't changed that much I figure I'll take the precaution and remove it..

Since my car is fine at the moment can I just remove the fuse? I don't have to get a hammer or put it in ACC mode right?

I can just do it with the car off correct?
I think they stopped putting the steering lock in for 2011 or 2012 models so you shouldn't have one.
__________________
2013 Gun Metallic Sport - Gamma V3 Twin Turbogized
DIY Gamma V3 TT Install * Jayhovah's Gamma V3 TT Install Pic'Z and Vid'Z * DIY: Washer Reservoir for the Boosted
Quote:
Originally Posted by redondoaveb
You've got a twin turbo sound system, I think you met your audio goals.
Jayhovah is offline   Reply With Quote
Old 01-28-2018, 12:49 PM   #62 (permalink)
Base Member
 
slongholio's Avatar
 
Join Date: Sep 2009
Location: Charlotte
Posts: 41
Drives: 2011 370z AT Red
Rep Power: 16
slongholio is on a distinguished road
Default

Quote:
Originally Posted by kcquinn49 View Post
When mine stuck it was -2 outside.
I hope no one has to die before they make this a recall. I routinely take my Z out to places far away from civilization and cell phone signal to have some fun. And sometimes stop to take in the starry night. Could easily have ended up dead in one of these situations if the car didn't start back up.

Went to the gas station last night. Not busy, so I parked next to the door. Normally I park as far away from the door as possible, you know, because ******** like to swing their door open into other people's cars. So now I'm stranded, next to what is a very busy place on Sunday mornings. Made it 7 years with no dings. Oh well, let me go beat tf out of that box and see if I can get it started. Lovely day, pouring down rain and all, for an impromptu work on the car. Hopefully can get it started at least and drive it home into the garage and remove the fuse.

Update: well, I beat tf out of it with as much force as i could muster in the tight space. Still wouldn't switch to ACC mode. Going tomorrow when it stops raining to trying shorting out the pink wire.

Update 2: Got it working today. Stuck a pin into the wiring harness alongside the pink wire, and groumded it to the chassis with a screwdriver. At first it didn't work, but I pushed the pin a little harder and it slid in about another 1/4 inch, then it work perfectly. Touch screwdriver to pin and chassis, and boom, click - unlocked to ACC mode. Then I proceeded remove the fuse.

Thanks for having this forum. Maybe I'll have my cousin write me up an invoice from his shop so I can get Nissan to reimburse me for my parts and labor. I feel like screwing them out of the money they would have screwed me out of for their failing. I bet they didn't even reduce the MSRP when they removed the "$400" part from the build.
haris73 likes this.

Last edited by slongholio; 01-29-2018 at 06:37 PM. Reason: new info.
slongholio is offline   Reply With Quote
Old 03-16-2018, 11:51 PM   #63 (permalink)
Base Member
 
Join Date: Oct 2012
Location: Sydney Au
Posts: 8
Drives: 11 370z roadster
Rep Power: 13
WPN370 is on a distinguished road
Default

So went to leave for work this morning and nothing just that damn key light.

Tapped it a few times and pulled the fuse now it’s perfect! Thanks for the good right up this was a life saver! 👌👌
WPN370 is offline   Reply With Quote
Old 03-17-2018, 05:51 PM   #64 (permalink)
Base Member
 
Join Date: Dec 2011
Location: Indiana
Posts: 86
Drives: 2011 370Z Coupe
Rep Power: 249
kcquinn49 has a reputation beyond reputekcquinn49 has a reputation beyond reputekcquinn49 has a reputation beyond reputekcquinn49 has a reputation beyond reputekcquinn49 has a reputation beyond reputekcquinn49 has a reputation beyond reputekcquinn49 has a reputation beyond reputekcquinn49 has a reputation beyond reputekcquinn49 has a reputation beyond reputekcquinn49 has a reputation beyond reputekcquinn49 has a reputation beyond repute
Default

Mine failed again yesterday, second time. I had success with the tire iron by hitting it rapidly. Hitting it hard didn't do it. So I tapped it real fast and it went to ACC right away. Went home and removed the fuse. Easy to do. Now the key icon is on all the time. Probably telling me I have a bad fuse. So next oil change I need to make sure they don't do me any favors and replace the fuse.
kcquinn49 is offline   Reply With Quote
Old 11-13-2019, 03:21 PM   #65 (permalink)
Base Member
 
Join Date: Dec 2016
Location: Alameda, CA
Posts: 2
Drives: 09 Nissan 370z AT
Rep Power: 8
VTown21 is on a distinguished road
Default

Thanks for this. I recently had this problem and searched the web to help solve this.

I was able to get it back into ACC mode by using a probe for the module and connecting it to ground. I had the car in ACC mode and then took the 10A fuse out.

After that, I put everything back into place and tried to start my car but it was unseccessful. Would the next problem just be that my module is downright malfunctioned and need to replace it?

I am able to start it using the probe but once I have it not connected to ground, it wont start.

Was wondering if this thread can help me out. Any help would be greatly appreciated!
VTown21 is offline   Reply With Quote
Old 11-13-2019, 03:45 PM   #66 (permalink)
Premium Member
 
SouthArk370Z's Avatar
 
Join Date: Nov 2010
Location: South Arkansas
Posts: 8,435
Drives: 2014 Challenger
Rep Power: 324198
SouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond repute
Default

Quote:
Originally Posted by VTown21 View Post
... After that, I put everything back into place and tried to start my car but it was unseccessful. Would the next problem just be that my module is downright malfunctioned and need to replace it? ...
The problem is usually that the locking pin has not retracted far enough to actuate an internal switch*. Link in my sig to more info. If the switch is not the problem then the ESCL may have faulty electronics.

*Edit: It will retract far enough to unlock the wheel but not far enough to hit the switch.
VTown21 likes this.
__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma
SouthArk370Z is offline   Reply With Quote
Old 11-21-2019, 12:35 AM   #67 (permalink)
Base Member
 
Join Date: Dec 2016
Location: Alameda, CA
Posts: 2
Drives: 09 Nissan 370z AT
Rep Power: 8
VTown21 is on a distinguished road
Default

Quote:
Originally Posted by SouthArk370Z View Post
The problem is usually that the locking pin has not retracted far enough to actuate an internal switch*. Link in my sig to more info. If the switch is not the problem then the ESCL may have faulty electronics.

*Edit: It will retract far enough to unlock the wheel but not far enough to hit the switch.


Thanks for the help! I kept trying to start it using a needles and connecting it to ground and I was able to get it working. I then was able to just do the fuse trick and it’s been running so far. I’m not exactly sure what I did thought to make it functional at the moment. I will be looking into your sig!


Sent from my iPhone using Tapatalk
VTown21 is offline   Reply With Quote
Old 05-12-2020, 09:59 AM   #68 (permalink)
Base Member
 
Join Date: Dec 2018
Location: In the moment
Posts: 191
Drives: Sideways most times
Rep Power: 11605
sportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond repute
Default

I keep reading about cutting the brown wire but can’t seem to find that post or thread. I am the proud owner of a new to me 2010 Z and would like to prevent this happening to me.
sportsman2003 is offline   Reply With Quote
Old 05-12-2020, 11:15 AM   #69 (permalink)
A True Z Fanatic
 
JARblue's Avatar
 
Join Date: Mar 2011
Location: Austin, TX
Age: 43
Posts: 36,450
Drives: 11 Z34, 98 E36 M3
Rep Power: 2684440
JARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond repute
Default

Quote:
Originally Posted by sportsman2003 View Post
I keep reading about cutting the brown wire but can’t seem to find that post or thread. I am the proud owner of a new to me 2010 Z and would like to prevent this happening to me.
Click the link in SouthArk's signature two posts up from yours
__________________

2011 370Z 6MT Sport Gun Metallic | ARC | CJM | Ecutek | FI | Fujimura | R2C | SPL | Stillen | TWM | Z1 | ZSpeed |
JARblue is offline   Reply With Quote
Old 05-12-2020, 01:39 PM   #70 (permalink)
Base Member
 
Join Date: Dec 2018
Location: In the moment
Posts: 191
Drives: Sideways most times
Rep Power: 11605
sportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond repute
Default

Quote:
Originally Posted by JARblue View Post
Click the link in SouthArk's signature two posts up from yours
Got it. Thanks for your help!
JARblue likes this.
sportsman2003 is offline   Reply With Quote
Old 05-25-2020, 01:10 AM   #71 (permalink)
Base Member
 
Join Date: Dec 2018
Location: In the moment
Posts: 191
Drives: Sideways most times
Rep Power: 11605
sportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond reputesportsman2003 has a reputation beyond repute
Default

I did this today. My lock had not failed but I thought I better get ahead of it.
It’s actually nice not to hear that thing retract when you start the car now!
Thanks For the write up. It made this super easy.
Memphis370Z likes this.
sportsman2003 is offline   Reply With Quote
Old 07-09-2021, 04:13 PM   #72 (permalink)
Track Member
 
filip00's Avatar
 
Join Date: May 2021
Location: slovenia
Posts: 554
Drives: 370z pack
Rep Power: 125427
filip00 has a reputation beyond reputefilip00 has a reputation beyond reputefilip00 has a reputation beyond reputefilip00 has a reputation beyond reputefilip00 has a reputation beyond reputefilip00 has a reputation beyond reputefilip00 has a reputation beyond reputefilip00 has a reputation beyond reputefilip00 has a reputation beyond reputefilip00 has a reputation beyond reputefilip00 has a reputation beyond repute
Default

After reading a lot about the dreaded steering wheel lock, I've decided to try the preventative measure of removing the fuse. I've read this thread (as well as others) and I'm glad to say it worked!

So just to summarize:
1. my steering wheel lock always worked fine
2. my car is 2009, all original, with 10k miles, so probably it was just a matter of time when it will seize
3. I put the car in ACC, opened the fuse box and pulled the steering wheel lock fuse out
4. problem solved, wheel lock removed.


....5. I use disklok for added theft security on the car, so I'm really not worried about the steering wheel lock.

Thank you for the free fix!
filip00 is offline   Reply With Quote
Old 04-25-2023, 11:06 PM   #73 (permalink)
Base Member
 
Join Date: Sep 2020
Location: OH
Posts: 18
Drives: ACE S/C Nismo 370
Rep Power: 5
Ryfrybell is on a distinguished road
Default

Mine failed today on my 2011 Nismo with only 16k miles on the odometer. Crazy that this fails so soon. Would have saved me a lot of time if I found this forum before it failed! Still saved me from towing the thing!!

Key light was on the dash and could not advance to ACC. Kept the ground wire jumped until I started the car and then removed the fuse.. Turned the car off and on a few times.. Good to go!!
filip00 likes this.
Ryfrybell is offline   Reply With Quote
Old 08-30-2023, 08:13 PM   #74 (permalink)
Base Member
 
Join Date: Aug 2011
Location: Puerto Rico
Posts: 38
Drives: 370z
Rep Power: 14
bebenegro is on a distinguished road
Default

Im so confused by this whole thing. My 2011 370z lighted up the key indicator a couple of days ago. Reading through all these suggestions, and as the car still turns on, I went to remove the fuse by the battery. After removing all panels and finally getting to fuse box, I open up and...

Nothing.

There is no fuse where the steering lock fuse is supoosed ro be. I have been the only owner of this car since August of 2011. Is this possible?
bebenegro is offline   Reply With Quote
Old 08-31-2023, 11:05 AM   #75 (permalink)
A True Z Fanatic
 
JARblue's Avatar
 
Join Date: Mar 2011
Location: Austin, TX
Age: 43
Posts: 36,450
Drives: 11 Z34, 98 E36 M3
Rep Power: 2684440
JARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond repute
Default

If your car still starts and runs fine and the fuse is removed, then you are good to go from that standpoint. Most likely the previous owner removed it. The key indicator can illuminate for reasons other than your steering lock. Could just be your fob battery.
__________________

2011 370Z 6MT Sport Gun Metallic | ARC | CJM | Ecutek | FI | Fujimura | R2C | SPL | Stillen | TWM | Z1 | ZSpeed |
JARblue is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Possible steering wheel lock failure NickBaragona Nissan 370Z General Discussions 11 12-26-2013 07:12 PM
Steering lock failure Terrace Canada 52 06-16-2013 10:32 PM
What I did to fix my steering lock failure... Sh0velMan DIY Section (Do-It-Yourself) 29 02-26-2013 10:23 AM
Those of you who have had Steering Lock Failure Thechidz Nissan 370Z General Discussions 449 01-12-2013 06:05 PM
Steering wheel lock failure 2010 Nismo Sidz Exterior & Interior 10 01-07-2013 05:43 PM


All times are GMT -5. The time now is 12:31 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2